Tecra S1: MS Access giving trouble!

Similar Questions

• Tecra R10 - TrueSuite Access Manager doesn't work with IE8

  Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

  I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

  Operating system: Vista Bussiness 32 bit
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager: 2.5.28.0

  Does anyone have an idea of the problem?

  Thank you.

  Hello

  Have you tested with IE7?
  Did this happen using the preinstalled Toshiba OS and Windows with IE7?

  If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

• Tecra M2 - cannot access windows after restoring two days ago

  Hello
  I bought the Tecra M2V for one and a half years. Now I could not access the windowns again. I suffered such a problem for the second time, just after I have use the two days recovery disk. He came out of the blue screen. He advised me to use safe mode. But I've tried and failed several times. My other friend both also suffer these problems now. It's really annoying. Hoping some kind people to help me.

  Thank you very much.

  Hi Min

  I think that something like this is boring. Please can you give us more information about this problem? Did you change hardware configuration? Is an external device connected to the unit? Are you using the original recovery media supplied with your device?

  As far as I know that the recovery procedure cannot be responsible for something like that. BSOD can be caused by other things. Believe me I got several different units and I have never, ever seen anything like it.

  To be more specific and explain exactly what you have done.

• Tecra S3 - cannot access the configuration of the BIOS 2 Page / can not peripheral chance to start

  Hello!

  I just bought a laptop Tecra S3 from ebay.
  I turned it on a TI said "NTLDR is missing". Good I thing the guy who sold it has erased its data from the hard drive, no problem I'll install a new Windows XP.
  But... now the problem.
  When the laptop iss merchandising, I hold down the 'ESC' key, then press 'F1' for the BIOS.
  Everything is fine.
  But I can not go on the Page 2 of the BIOS. PGUP/PGDOWN has failed. I also tried with an external keyboard.
  I read that the manual (PDF) that says "Hit F12 to go to the Bootdevice selection."
  But that din't work.
  At the start of the laptop it does show that for a second half the Toshiba screen, even when I hit F12.

  What can I do to make the laptop CD/DVD boot? Or how can I enter the bootscreen or BIOS Page 2?

  Greetings from the Germany,
  Holger

  Start your laptop and press F12 to get into the boot menu.
  Has chosen the CD/DVD drive and press ENTER.

  Optical drive will serve as first boot device.

  You can also try with the C key.

  Place the bootable disk in the disk drive, start your laptop and press the C key several times. This will force it's STRANGE to be the first boot device.

• Re: Tecra M11 cannot access the BIOS

  I have a brand new machine Vrab M11 - 11L. I have set a password on the BIOS, but it can now access all the. When I turn it on I get the home screen Toshiba, I press the ESC key and am presented with a little note saying "F2 for Setup. I press F2 and the screen turns off, I get a sidekick flash slider three times at the top of the screen and then it boots into windows. I need to change a setting that is not covered by HWSetup. I can't enter HWSetup with my password, but it is useful for me!

  Hello

  First try * INS button, then * F2 button
  In my case it worked!

• Ejecting disc still giving trouble.

  After the last update to El Capitan I always feel the same problem with my back disc ejected at random, even if she did not appear with the same frequency. I thought it had been fixed after a few days everything was good but then it happened, and did about once a day since.

  Everyone having this problem?

  Have you visited the preferences-> Energy Saver system and disabled the preference to "disk to sleep when possible"?

• How do I give users access to the addition of other users and groups in weblogic * without * giving administrator rights

  Hello

  Before opening a SR Oracle for the same problem, just wanted to put it out there to see if we can provide a non administrator user access to the Weblogic administration Console so that it can log and ONLY add users and groups, but not change any setting in the administration console. We offer a personalized access? All grain specific to be accessible?

  Please don't give me the links where it says "give read-only access", giving "monitor."

  read only user cannot add new users/groups in the administration console. The administrator credentials can be provided to that user. It just has to be able to connect, go to security domains > myrealm and add new users and groups. nothing else.

  Please let me know.

  Thank you

  Dan

  Thanks Christian.

• Tecra A8 - DVD does not properly

  Hello

  My Tecra A8 has started giving me problems when I want to read a DVD/CD.

  If I launch the system with a disk in the drive, then explore correctly reads and shows the details of the data on the disc, though it may be music, games, DVD, movies etc. but when I go from drives, the new drive is not read disc that already contains data. It opens a popup and start the procedure for the preparation of a new blank disc. It shows all information data to a disc, if the disc is inserted, after the OS has started up?
  I thought that maybe it's a driver that does not work properly?

  Help, please

  Thank you

  What is happening or what appears on the disc if access you the data on the CD by workstation-> CD/DVD drive?

  This problem occurs with all CD or only single data CD?

• Tecra A9 S9015X touchpad hangs without reason

  Hello

  I was faced this problem for awhile now.
  I'll b work normally and suddenly I can't click just any more...

  I can move around the use of the touchscreen tablet... but when I move my pointer on a hyperlink is not just point out therefore cannot click on it...

  The solution for this is to open the (ctrl alt del) Task Manager or simply show desktop on and off voltage and itll work for once, otherwise I have to reboot to get it to work...

  I tried to again follow my steps each time to see if tehres anything specific that would trigger such a thing without success.

  I double checked to see if theres a driver for it. It seems that there is not! the most recent is 2006.

  If I plug in a mouse I can use it normally.
  All the tips on this are greatly appreciated :-)

  Thank you

  Hello

  Some time ago I had a few different phenomen with fingerprint on Tecra A9 software running in trouble.
  Can you check if there is a newer version for the fingerprint?

• Tecra A8: How to enable VT in the BIOS?

  I run vmware player on a Toshiba Tecra A8 with Intel Core.
  When you start vmware, he tells me, that my CPU (CoreDuo2 7200) is capable of VT, but this option is disabled in the BIOS.
  Can I change this setting?

  Some versions of the BIOS supports this option but I m do not know if this is possible on the Tecra A8.
  Simply access the BIOS and check the unique pages. If you find this option, you can try to activate. Otherwise it s is not possible.

  By the way: with ESC key to access the BIOS

• iTunes Gift Card scam

  My sister in the United States bought 2 iPhones (one for itself) and one for me. She we me shipped in India (sim free iphone), after a while my iPhone starts giving trouble that was sent to me. So I sent it to him. She wanted to replace, so she looked up a number of apple care and discovered the following mentioned repeatedly and addressed the issue with apple support management and he said that both phones will not work in India because it is not factory unlocked. He said that apple will replace these two phones with factory unlocked ones. I have to provide a deposit, and apple will send me two phones that will be factory unlocked. When I go back to my old two phones, the security deposit will be refunded. So she bought the iTunes gift card and shared the details with him. But phones were not delivered in time, she returned to the same survey number which becomes unavailable, so she contacted on another number of apple support, then they said they have not received any request from her and told her that she had been deceived by a fraudster and it was a scam.

  Now the apple say that they are sorry for the loss of his money and they can do whatever it is in the present. Customer care people do not answer until she reminded them repeatedly and the lady who finally gathered his disconnected the call between the two. It's pure not meaning, people are deceived by using the Apple name and they are not bothered on this subject and they say sorry for it. Then she wrote to the care of apple with all the details and now they say they will study the issue.

  I think Apple should look into this issue seriously as a fake apple support page (replica) opens on the first link and fraudsters are deceiving the people. It is a serious matter. How a person know that if he's talking to a direction of apple support authentic.

  Here are the details of the e-mail and telephone numbers which have been used by this fraudster: (CAN ALL ONE please SUGGEST ON HOW to FILE A COMPLAINT CYBER CRIME CELL AND THE PROCESS AND GET the MONEY BACK)

  Apple support number called - 1800 235 3 *.
  The person who claimed to be Apple executive support - name - Eric, Extn 7000
  He gave a service ticket number - 61129 *.
  He gave a confirmation number - 21974. *
  He asked me to send photos of the itunes to email card - [email protected] *.

  Three cards iTunes gift card whoese number were shared - $500, $500 and $200.

  < published by host >

  I can't say how your sister found the phone number above for Apple Support.  Clearly, it's a scam.

  Phone number of Apple's Support to the United States is (800) MY-APPLE, which translates by of (800) 692-7753.

  I can't imagine there is a way to get your money back.  I'm sorry.

• SP A10: XP SP2 and Maxtor IEEE 1394: need MS patch?

  I have a Satellite Pro A10, hooked up to an external Maxtor 80 GB of disc over a Firewire/IEEE 1394 link.

  IEEE 1394 is attached to a card PCMCIA (from Belkin) that uses the NEC 1394 chipset.

  A hotfix is available from Microsoft (see http://support.microsoft.com/default.aspx?scid=kb;en-us;885464) but the MS Support saying this can only come with the support of Toshiba.

  Can you help me get the fix?

  Without it, I can rarely access the drive.

  It works fine on my Tecra M2 that accesses the same disk through its integrated 1394 interface. The problem only occurs with the NEC 1394 chipsets.

  Hello

  Well, have you contacted Belkin support?
  In my opinion, you should ask manufacturers of PCMCIA cards for the upgrade or this hotfix. In addition, you can check the drivers Toshiba download page for this fix. Microsoft patches are known as QFE. Maybe you will find one that suits. But unfortunately, if you are not able to find it, you will have to wait for the next service pack for Windows XP which will include this fix. :(

  Good bye

• Not prompted to enter the password for the wireless connection.

  I have windows 7 and were able to access wifi trouble-free connections. However, today, I'm at a new location and when I click on the desired link I don't get no prompt to enter the password or key. I can access my computer connection currently wifes laptop so I know that the connection is working correctly. I went to control panel, network configuration and manage the connections and removed all my other connections. I rebooted and still cannot access the connection desired because I can not enter the password. I also tried to add the connection and it still doesn't work. Thanks for your help!

  Hello

  In the same exact location, your wireless computer does not work, and your wife request computer password and works OK with the password?

  The password prompt is displayed only after the computer is currently connected to the access point.

  Maybe your computer firewall blocks the ability to connect to the access point.

  Wireless in general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Tecra M11 has a trap door for access to the hard drive?

  Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

  Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

  Thanks in advance for any help.

  Hello

  I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
  You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

  Welcome them

• BOOT Menu access Tecra R Series

  How the hell you access the BOOT Menu on the Tecra R Series?

  And why it is not documented in the instructions (Toshiba)?

  Thank you

  Hello

  Menu start AFAIK is accessible only if you press F12 at startup.
  Choose the boot device using the up and down arrows and confirm with the button ENTER.

  Check it out.