El Capitan installation has failed then restored to Yosemite, but now the different plug-ins and AA are missing - HELP!

Similar Questions

• Unable to install vista 64-bit sp2, his show Installation has failed.

  his show Installation has failed.

  Hi manjunathak,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts and try to install the updates.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the Microsoft article mentioned below and check if it solves the problem:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  For reference:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• I a m trying to install Photoshop elements 13. As it is almost finished, a box comes top-installation has failed errors occurred on your installation.

  I a m trying to install Photoshop elements 13. As it is almost finished, a box comes top-installation has failed errors occurred on your installation.

  Please see:

  l https://helpx.adobe.com/Photoshop-Elements/KB/Troubleshoot-install-using-logs-Elements.htm

  Troubleshoot installation | Adobe Photoshop Elements & Adobe Premiere Elements for Windows

  Troubleshoot installation | Photoshop Elements, Elements first. Mac OS

  I hope this helps.

  Concerning

  Megha Rawat

• Hi, I have a problem whit Creative Suite application installer. Friday I bought adobe package, but at the time of the installation tells me that your trial period has expired, when he asks license me I understand that I have a subscription... Please help

  Hi, I have a problem whit Creative Suite application installer. Friday I bought adobe package, but at the time of the installation tells me that your trial period has expired, when he asks license me I understand that I have a subscription... Please help me PS sorry for my English by Martina Faccia

  Hello

  Please see errors in connection with creative cloud and Creative Suite applications, activation and connection Solutions and Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Hope that helps!

  Kind regards

  Sheena

• I restored my iPod, but now, only 300 2000 songs will be synchronized in all, no music videos, movies or TV shows will synchronize

  I have restored my iPod, but now only 300 songs 2000 + can be synced through. No music videos, movies or TV shows will be synchronized.

  Songs must be store on the local storage of the computer to sync with your iPod.  Find one of the songs that will not sync to the iPod in your library iTunes music.  Right click it and get the information.  In the Info window, file tab, look at the location.  Does show a path of file to local storage on your computer, or does mean iCloud?

  Another way to see is to show your iTunes music library using the songs view (list of simple songs with columns).  If the column download iCloud is currently hidden, make visible (line header right click to show/hide columns).  This column is narrow with a cloud symbol in the title.  If you see a symbol of the cloud with the arrow pointing down to the songs (in this column), these songs are stored only in iCloud.  It is not accessed by iTunes from your computer storage.

  Thus, for the issuance of songs, a possible reason for the synchronization only 300 songs is because the rest are accessed iCloud (Apple servers).  These song files can still be stored on the storage of your computer, but iTunes lost track of the local copy for any reason whatsoever and is now with access to icloud.  Maybe you moved the folder iTunes Media manually at a certain time and these records of existing local songs got 'lost' in iTunes; the 300 songs are those that you added from this point, so iTunes knows where these music files (and can sync them to your iPod).

  For your movies and TV shows, the cause could be the same. You can access them by streaming from iCloud, instead of local storage.  You will also need to set up the settings screen of the iPod for the synchronization of the TV shows and movies, if you haven't already.  To view these images, select the iPod in iTunes (click on its button on the device on the horizontal bar) to display the settings for the abstract of the iPod in the iTunes window.  The side left (in the sidebar), under settings, click on movies (and TV shows).  To the right, check the box for the Films of synchronization ( sync TV Shows) and set up the synchronization.  Then, click apply.

• Lightroom has left while the import is in execution-photos are missing.

  Lightroom has left while the import is in execution-photos are missing.  How can I fix the index (?) so that I can see the pictures?

  When I look at some of the records, the number of pictures is 0.   In the 8.1 WIN it says there are 10 pictures (for example).

  If tried to re - import a fold er who had 0 photos in Lightroom, but it is said that the 10 photos are already there.

  Lightroom is not a file Explorer. It is not "air" inside a folder and see how many photos is there, just like Windows Explorer. If both should not match.

  If you are unable to import the photos, which means that they have already been imported and you will need to find in Lightroom. Then, go to the library Module and perform all 4 of these steps to find your photos:

  1. Click on all of the photographs in the catalog Panel
  2. Disable all filters (once or twice Ctrl-L)
  3. Develop all batteries (Photo->-> develop all batteries stacking)
  4. one of those 'missing' photos search by file name

• The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

  The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

  It seems uninstall was not clean. Please use available in the link mentioned cleanup tool to remove the CC Br entries below.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Please follow the instructions as indicated and then reinstall the CC Br.

  Kind regards

  Ashutosh

• Satellite A200 - 1 M 8 XP installation has failed

  Right time of the day) I recently purchased laptop Satellite A200 - 1 M 8. Wiped vista thanks 7.0 version sata driver successfully,
  but this does not work for me again. XP continues, I say it do not format, he asks new driver and won't even try to read my floppy USB drive.

  Ok.. I tried to integrate the drivers with nLite (added a folder with the same sata drivers), it does not work too.
  System still wants driver to see the hard drive at the beginning and this time when he reached the moment of shaped.
  He 'cannot copy' one of the files in the drivers folder. If I escape, I have blue screen "stop" during the 1st load of windows. 7.5 version causes
  "unexpected error" and won't load at all.

  Do I did wrong? I'd appreciate any help!

  Hello

  I think you just try to install a bad driver. You need to install the Intel Matrix Storage manager.
  On the Toshiba driver page, you will find the Storage Manager 7.5.0.1017 version.

  The Sat A200 - 1 M 8 belongs to the series of PSAE6 so please choose the right!

  I think you need to enter the BIOS and should define the default BIOS settings, and save the changes.
  Then try to install the Intel Matrix Storage Manager using the F6 key during the XP installation.

  On my laptop it worked properly. So I see no reason why it should not work on your laptop!

  Best regards

• Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

  I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

  Hi KathyHendges,

  1. What mail client do you use?

  Step 1:

  You can try clicking with the right button on the link and select run as administrator and check.

  Step 2:

  This error code can occur due to corrupted Microsoft Visual c++ installation.

  To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• has run restore to earlier date now nothing on Microsoft works and can not download them

  Ran to restore to an earlier date to treat a problem now nothing on Microsoft works and I am unable to download from them. 0xc0000135 error any ideas?

  Hello

  I suggest you check the steps.and following if it helps.

  Methode.1

  Perform the check and the clean boot if you have the problem.
  a. click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click on to clear the load startup items check box.
  d. click on the Services tab, click to select the hide all Microsoft Services check box and then click disable all.
  e. click OK.
  f. When you are prompted, click restart.
  g. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Note:

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  On the general tab, click the Normal Startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  See also the link below.

  http://support.Microsoft.com/kb/963900

• Windows 7 Interactive logon process initialization has failed. For more details, please see the event log.

  Has anyone received this error.

  Help, please

  Hi cweberestate,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  Method 1

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If you are able to boot into Windows in the trunk and then try the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore the system to a Restore Point fails: System Restore was unable to extract the original copy of the restore point consoleDirectory.

  I can create restore points and when updates are installed the system automatically creates a restore point. The problem is that I can't get the system to restore to a restore of these these points.

  System Restore was unable to extract the original copy of the restore point directory

  Source:%systemroot%\registration

  Destination: ComPlusStaging

  Hello John R H,

  Are you able to restore system successfully on a different date, or that you get the same result?  I looked through this thread and was curious to know why you want to perform a system restore?  Having other issues in addition to what you have described?

  Try to make a last good known Configuration and see if you are able to perform a system restore.

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Please let us know status.

• I used to be able to 'restore' all my browsers open tabs (about 20 in each browser) and Firefox (about 30), but now the browsers have disappeared. Help?

  Hello

  I like Mozilla Firefox and have used the browser for years.

  I would like to have another Firefox browser for each main subject (for example, every future trip). I have about 30 Firefox browsers open at the same time in my memory of the computer. Each of these 30 browsers has about 20 different tabs open in my memory of the computer. So in total, I have about 30 x 20 = 600 open different tabs (Web sites) at any time. I often refer to them. Given that I spent the time to search for and find those sites, I want to read them easily in the future. I have also about 100 Favorites, but bookmarks are not as organized as browsers and tabs. At night, I put my computer to sleep. In the morning, I turn on the computer, and all browsers and tabs are there. If I had to reboot my computer, (for example after the installation of Windows updates), and then Firefox used to ask if I want to restore the previous session, I did, and I got all the tabs of 30 x 20 = 600 back legs without problem browsers.

  But recently I can't restore all these browsers; they are gone. How to restore all the browsers that I had to open previously? I see the tabs under "History", but they are not organised in all the browsers that I had opened. I have reset Firefox to the factory default, but which did not help.

  Thank you
  Craig
  Seattle, Washington, USA.

  Hi craigfmiller,

  A reliable restoration is to have all 600 tabs open and have options set to "remember tabs from last time", in you, Firefox preferences.
  If restore previous session on the current on: home page, has not all tabs that open upwards I recommend also having an add that manages sessions. Session manager can be a good idea to check.

  I hope this helps.

• I started the download of el capitan and did not have enough space for the upgrade - I released space, but now the upgrade is blocked for download

  I'm on 10.10.5 and try to upgrade to el capitan via the App Store.  I don't have enough space at the beginning and upgrade wouldn't start - I got error message says not enough disk space.  Once I released space, download hangs and will not end.  I have restarted the download several times and have rebooted as well.

  Hello

  Take a look in your Applications folder to install Mac OS X El Capitan.app. If you find move him to the trash, then empty/remove it. Another thing you could try is to go to Launchpad and look an article with the 'X' Mac OS X logo on it,

  Click and hold on it until it wiggles, and then click the little 'x' and then delete.

  Restart the Mac, relaunch the App Store and see if you can download now El Capitan.

  Another thing you can do, when the download is complete and what is important before you begin the installation process, do a copy to install Mac OS X El Capitan.app and keep them safe, to an external drive or USB key, the original in the Application folder item is deleted once the installation is complete. It is snack and practice have this spare copy so that you can install on other Macs if you want you will need to re - install the system should anything go wrong in the future.

  And always, always make a backup before making major changes to your system.

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.