Similar Questions

• Portege R830 - external HARD disk error - "target not found device.

  Hi all

  I recently bought a 1HD R830 which has windows 7 as its OS.
  I have a few old external hard disks that were formatted on windows vista.

  When I try to use it on my new computer it says "target not found device.
  I called support for the external hardrive, who said this is an incompatibility problem and that I would need to re format external hard drives (and therefore lose all about them unless I copied them on a compatible hard drive).
  Is this true?

  Rather than go through the hassle to copy all data to another hard drive is there a way to make my new computer compatible with the external hard drive?

  Your help is very appreciated.

  See you soon,.

  Jason

  I have an old drive external HARD with images recorded on it and I use it for years with WXP, Vista, Win7 and now with Win8 too. There is no problem at all so I put t understand what could be wrong with your HARD drive.

  Do you have similar problems with other external devices connected to your laptop Portege?

• No Esxi 5.1 found device driver

  I configured a guest virtual machine and pointed to boot an ISO, so I can load window2008 r2 when I power on displays the screen of the os I hit install now it tells me so

  No dirvers not found device. Make sure that the media contains the correct drivers, and then click OK?

  How can I fix it?

  If the image is bad or CRA wrong this could be the only problems that I know. This occurs when the false image downloaded from MS or during the creation of the new VM from the guest operating system incorrectly is selected or the download of the image is simply wrong (it happens).

• ICloud sync broken between Yosemite (too old for El Capitan) Mac and iOS9.3 on devices, for all Apple applications. Any solution?

  Since that is new iPad and iPhone one last week, with iOS 9.3.4, I can't rely on iCloud (iCloud Drive) for synchronization between these devices and my iMac on docs or entries that I create in Pages, Numbers, calendar, Contacts, Notes, reminders.

  With no synchronization goes, I am now frustrated with Apple based applications.  The only solution is to buy a new iMac that can do El Capitan for iCloud to synchronize?

  My 2008 iMac cannot go beyond the latest version of Yosemite.  Even apps that I continue to use without problems - except iCloud who can't do what it should.  According to me, only yosemite on the iMac in 2008, was made bankrupt by the last iOS.

  That's the problem - unless someone has found a workaround.  Without a functional iCloud, sync that I've been waiting for has disappeared.  I need to change how to manage what I do on the devices and the computer.

  I would like to find a way to "merge" safe documents created in these applications on both devices and the computer. Initially a merger will have duplicates.  I can't let the docs on any device replace the docs on the other.

  To avoid any loss of docs on any device and computers, I'm afraid to try to use iTunes.  So I won't try it.  Maybe I need to go "manual" and look at the files on each and do the merge manually, by sending an e-mail.  Help!  I discovered this by accident and now that I look closer I see that synchronization does not occur.

  between Yosemite Mac (too old for El Capitan)

  Any Mac that can run in Yosemite can run El Capitan. Early 2008 iMacs can run El Capitan.

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• El Capitan "Don't Update" no boot device

  Hello

  I've updated updated my MBP 2011 end of El Capitan, and now I'm unable to start Windows. The Bootcamp partition is always visible in disk utility, but if I try to start it I get a response of "no boot device."

  Here is my disk configuration:

  

  You can use Re: [help] can't start Windows (8.1) after partition resizing as a reference and rebuild your MBR using GPT Fdisk?

  GPT Fdisk is available at https://sourceforge.net/projects/gptfdisk/ .

• Satellite L850 - Bluetooth never found devices

  Hi all

  I am having some problems with Bluetooth on this laptop. Windows says that all drivers are installed properly and the Toshiba Bluetooth Stack program says that the bluetooth module is working, however when I search for bluetooth devices it seems to get, but nothing is ever found.

  I don't know if he ever worked on Windows, because this is the first time I tried it, but it doesn't work very well if I boot to Ubuntu, so I think it's a problem of Windows 7. I also tried different drivers Atheros drivers, generic Windows drivers and Toshiba Bluetooth Stack v8.x understood (with and without Bluetooth Monitor 4, no matter who is) with the same result.
  Does anyone have an idea of what to try next?

  See you soon
  Tom

  Toshiba Satellite L850 0C900R
  Win 7 x 64
  Atheros Bluetooth Chipset

  Hello

  I guess that holders of Satellite L850 PSKDLA-0C900R and card combo Wifi/BT. I think that the Atheros WLan card. (just to be sure check in Device Manager)

  The WLan/Bluetooth combo card sharing WiFi and BT using a single module.
  This means that you need to install additional software called Atheros Bluetooth filter package that allows you to use the WiFi and BT.

  Since it is an Australian model for Toshiba laptop. You should find the Atheros Bluetooth packet filter on the Australian driver Toshiba page.

  Note: you need to install the Atheros Bluetooth filter package before installing the battery Bluetooth Toshiba

• Noise all using any device USB to the Satellite L655 - 19H

  Some time ago I bought the laptop Satellite L655 - 19 H.
  After say 2 or 3 weeks of use, I realized that sometimes it makes strange noise - like whistle not very strong, or something like that. Then I realized that it depends on the use of usb devices, when I plug in usb-flash Cards, keyboard, mouse, webcam no matter what usb device - this noise appears.
  Gave my phone for warranty service, they have repaired more than 1 month, then gave me the diagnosis - problem with the motherboard, the motherboard replaced.
  But the problem is always the same, the same noise. Is not too strong but after Let's say 5 hours near this large moskito makes crazy ^^.
  So I have two questions:

  1. everyone knows what this noise could be connected to? I am not an expert in the field of electronic devices, but spoke with a friend of mine, he said, it could be related to damaged transistors or defective to the Manger-usb or something, this is perhaps true?

  2. How can I check the serial number of the motherboard that has been installed on my device, when it was produced - I want to check the warranty service guys have really done anything, and they just kept my laptop 1 month in stock and then said, he fixed, man.

  Thanks for your help and best regards.

  Very interesting question.
  Have you noticed the same behavior with or without adapter?

  # I think you're the first person on this forum who has this strange issue reports related to the use of external USB devices, so I don't think it is a general problem
  # This can be problematic. Have you checked screws at the bottom of your laptop? They are like a new or it is visible that your laptop has been opened?

  What you can try is to communicate with other services and ask to check again.

• START PC portable HP 14 NOT FOUND DEVICE / Hard Disk (3F0)

  Dear Mr. / Mrs..,.

  I just bought my laptop HP 14 PC 14-r000ne after a few weeks, my laptop just restarted after an update of the system, during the restart my screen becomes black and display a BOOT DEVICE NOT FOUND / hard drive (3F0). I have tried to run the test drive HP and got a failure ID 9BR15A-76876R-XD7V7G - 60 X 403, Hard Drive 1 in the test log. I have no idea what to do next...

  IM I have solved this problem or should I return it due to manufacturing defects?

  Hoping someone can give some advice about this problem

  Sincerely,

  Roco

  Hello
  
  This document can help you troubleshoot the error not found boot device: http://support.hp.com/us-en/document/c01443463
  
  Since you've done the hard drive test & got a failure ID, if indicates failure of hard drive / had no
  
  It is best to contact the dealer for default or HP directlyto replace HARD drive & recovery disks.
  
  I would rather contact the dealer to get a new property.
  
  Thank you

• no operating system found devices and drivers missing please help

  my computer is an esprimo mobile v5535 equipped with windows vista I have gave me it for my son that he had ceased to function properly

  and he gave up on this subject. I cannot at present afford a laptop due to illness and I would like to restore

  . I tried to reboot several times but it does not, at present, I can only try restarts the device under voltage, then through reboot menus. my last attempt was using a drive recovery for windows whitch almost worked but stopped when he asked for the drivers and devices to load, but I don't really know what to do. the message that is displayed is that no operating system found that I was wondering if it would be interesting to give an expert to fix, although the cost could be a problem. Hope you good people can much help thanks james

  Hello

  1. have you made changes on the computer recently?

  Before using recovery discs that you can try the following methods.

  Method 1.
  In this scenario, you can always perform a repair boot which usually solves the startup problems automatically.
  Follow the articles for help on repair system.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2.
  Stage I.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, use check and Internet explore if the problem persists.
   
  For additional information see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  Stage II.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 3.
  I would also recommend to contact the computer manufacturer on the problem that you experience when you use the recovery disks.
   
  I hope this helps.

• not found device W1907 driver

  Keep in mind that I am new. That said, I recently bought a new system and in the process while I was prompted to load the device driver for my monitor w1907. When doing this I got the message that the software has been found, but a problem occurred when trying to load it. Now, every time that I reboot I get the notice of new hardware detected, saying that the driver must be installed. I try every time and it does the same thing. I use this monitor with no problems at the moment, but I'm running a separate set of speakers so don't know if there is no sound problems. Should I try to find a solution to this? I went online to HP support and downloaded their driver, the same results page. If it is not a big deal, then how to make the notification to stop appearing at restarting? The "don't ask me again...". "driver installation does not work. Any advice on that would be appreciated, thanks in advance, oldschool

  Maybe it's because you used the driver cd for the LCD I recommend to never use.

  Try will start, then right-click on computer and go to properties, in the upper left corner, click on Device Manager then when he comes back to find monitors, click plus the sign, right click on the HP... lcd and go to update driver software, and then click Browse my computer for driver software then up or down, click on let me choose a lisr of pilots... and then click Generic PnP monitor go then, wait a few moments, then click Close or finish and reboot the pc.

  I would like to know if it works.

• No bluetooth not found device DM1z 3000 product XL 303AV

  New out of the box, bluetooth services do not work

  Wireless services are striving to internet

  In "My Bluetooth" message displayed in red "the attached bluetooth dongle is not supported.

  General settings "address not found".

  Device Manager/bluetooth devices/Ralink Motorola BC8 3.0 + adapter/properties/driver "driver is up to date" and "best driver for the device is already installed".

  Windows 64 Pro installed such as provided

  I got the allsystem from the recovery disc files and downloaded all updates since reloading

  The end result is so that the o/s says the Bluetooth adapter works, there is no analysis or detection of other Bluetooth devices and a few things greyed out in the settings of my General Bluetooth as 'my computer name' and 'device more will see. "

  This is the same as the previous post about this problem

  So what is the answer? return under warranty to HP Store?

  It looks like support to me

  Install the drivers updated for your here bluetooth adapter and it should fix it for you

  P.S: Drivers for Win7 64 bit

• I can't use my Casio synthesizer as input/output audio device on Windows 7. How can I listen to the MIDI on the synth tracks?

  It seems to be connected and working as I look in Device Manager. Yet I have such not selectable in the config of sound device. It is not found to read settings or the settings of the records. Back then on Windows XP without problems.

  P. S.: sorry for my bad English.

  Hello

  Here's a similar question post that you may find useful.

  The release of Windows 7 MIDI device selection

• Bridge CC with El Capitan 10.11.6 output module

  Hoping that someone out there might have a solution to the following problem:

  Try to get the output module to work with my CC bridge (most up to date available download) and problems. Production appears in space work, but when selected, no longer gives any options (I'm trying to use the program to create a contact in PDF to images sheet).

  Have reset the workspace and tried to locate the !-$$$ AdobeOutputModule.workspace file on my drive hard to remove, but had no luck.

  Reading through the information on the module - it is said in the media which is for Mac OS (10, 6 - 10.10), does that mean my (El Capitan 10.11.6) operating system is as up-to-date as it is not compatible?

  Jess x

  Hi Jess,

  Please use this link to download bridge CC 2015 version 6.3 How to install Adobe Output Module in bridge CC

  * Note: Make sure that the bridge is closed before installing the output module.

  1 double-click on the downloaded file to decompress. Open the AOM_Package_Mac resulting

  This folder contains:

  The folder Adobe Output Module

  The AdobeOutputModule.workspace file

  2 copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the 2015 CC bridge Extensions folder to the appropriate location:

  Mac OS: cc/Library/Application Support / Adobe / Bridge CC 2015 Extensions (here, the library refers to the library system, not the library user on Mac OS X)

  3. copy the file AdobeOutputModule.workspace in the folder workspaces under the folder of the bridge CC 2015 Extensions (same folder referenced in step 2).

  Concerning

  Sahil

• Smart Z580 Fan Noise Control - I found the button, but how does it work?

  I just bought a Z580 with Windows 8. It has a Smart Fan Noise Control sticker. My understanding is that it can be used to control the fan speed. How? I don't find it in the manual. The button is the right most of five white labels under the badge of lenovo under the screen. Then, the fan (not really a button) button is one that looks like a sign with a quarter moon on the right. If I press on it, it does the cleaning thing fan but how do I speed?

  I would try to change the speed of the fan because my fan made a very slight sound pulse. Otherwise I love this computer. It has so many interesting features and works well.

  I think that you must install the version of Win7 power management software, as I think the Win8 version has only the option "dusting", when the Win7 version has 'standard', 'silent' and 'effective heat dissipation", also the"dusting"option by pressing the sensitive, stars and moon symbol.

  Make a system restore point before changing anything.

  John.