Eliminating the constant file permenantly desktop.ini in Windows 8?

Similar Questions

• I found a lot of files unwanted 'desktop.ini' in windows 7 family basic anyone can help me in this matter.

  I found a lot of files unwanted 'desktop.ini' in windows 7 family basic anyone can help me in this matter.

  You can just leave them alone.  They tell Windows how to display records.

  You can open them in Notepad if you're curious & want to have a look inside of them.

  If you don't show hidden or system files, you won't even notice them.

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Please need help, my computer does not start. I get the following message:

  Windows didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You have the windows XP Setup disk?

  · What is the exact error message that you receive when the computer starts in return?

  You can follow the procedure from the following link: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• Startup error: the following file is missing or currupt/windows/system32/config/system

  Original title: xp dell 2004

  He said that windows did not start because the following file is missing or currupt/windows/system32/config/system

  Hello

  The article below should help you to start your computer successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows didn't start because the following file is missing or corrupted \windows\system32\config\system

  Windows windows xp could not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can accept it corresponds to repair this file by starting windows setup using the original Setup CD
  Select 'r' in the first screen to start repair

  I don't have original cd so I downloaded from the internet.  Only 1 cd when the instructions said it would be 6. that didn't work

  tillieme,
  You will need a valid XP disc to run the repair.  It is possible that the PC manufacturer develop a recovery hard disk partition.  You should check with them to see if it's an option.  Also, some manufacturers will provide filtering alternative for a small fee. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Disable the creation of files desktop.ini in Windows 8

  Hi all

  I want to know if this is a way to disable the creation of files desktop.ini, at least in the desktop system folder.

  I knew that under XP there was a DWORD key which should be created to avoid creating all the desktop.ini files in the computer.

  I don't want the desktop.ini file features (personalization of icon, remembering the last display in each folder options, etc.)

  So I don't want to hide the desktop.ini files. I want to remove them and avoid Windows 8 create again and again.

  If Microsoft has disabled this customization which was present in the earlier version of Windows and now is not available (to disable the creation of files desktop.ini) just say. If there is some other registry key to be created or modified, please advise.

  Thank you

  Pablo.

  Hi Pablo.

  I would like to inform you that the Desktop.ini is a system file that addresses common issues, such as downloads, Documents, photos and music etc. When a change is made in these files, Desktop.ini is updated.

  Deleting the file will cause problems with the operating system and it is not recommended to delete the files. The default desktop.ini a hidden system file and read-only attributes assigned.

  If you want to stop these messages, go to the files through Search Options, click settings and you will see the Folder Options, click on it and the view tab and scroll down until you see "Hide protected operating system files (recommended) and put a checkmark in the box."

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Unable to find the personal files and desktop wallpaper is changed after the installation of Service Pack 3.

  Original title: Service pack 3.

  My computer automaticlly installed Service pack 3 and when it was over installation and rebooted I couldn't come back, it only opens to the Welcome window that I tried to do it on safe mode, afew ways and all I would get was a mess, saying file is missing or damaged windows root>\system32\hal.dll. Please reinstall a copy of the above file, then there was another mess, saying load needed DLLs for Kerrnel. My computer would not shut off either Finally I held the off button down until it finally stops, then when I started it back up he did not return, but it wasn't the same startup window. There was another image of office programs on my desk were not all the same and all my photos are nolonger may not find them as well as some of my personal files that were no longer on my desk. is could someone please tell me what happened?

  Hi smittycindy,

  What steps you have tried to solve the problem?

  one) that you are able to boot to the desktop now, try to do a system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I restore files using FileHistory.ini under Windows 7

  I accidentally deleted a file sometimes there is and I found that the I erased from the trash. And I found a FileHistory.ini in C:\Users\Administrator\Downloads\IniFiles and deleted file is written there. How can I restore it via this Ini file?

  I am using Windows 7 32 bit

  Hello

  Please contact the Microsoft Community and I apologize for the delay in responding to your request.

  Historical files is not available in Windows 7. It is based on window 8 and 8.1.

  You back up the files before deleting them?

  I you have to check out these items-

  http://Windows.Microsoft.com/en-CA/Windows7/recover-lost-or-deleted-files

  http://Windows.Microsoft.com/en-CA/Windows/restore-files-backup#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows7/restore-system-files-and-settings

  In addition, you can use free third-party programs of recovery file as well.

  Note: third party software are to be used at your own risk.

  Let us know if it works for you.

• Failed to read the configuration file. New installation on windows 7

  I just downloaded and installed firefox on my windows 7. No error on installation. When I try to launch Firefox I get this dialog box. Configuration - the configuration file cannot be read. Please contact your system

  administrator.

  Note that you must delete the Firefox program folder to do a clean reinstall to remove the file that is trying to access the mozilla.cfg file which probably does not exist.

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

  Original title: windows xp, do not load until 08/06/11

  Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

  Thanks derek

  Hi Derek,.
   
  For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:
  How do I recover from a corrupted registry that prevents Windows XP startup
  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
   
  For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.

• No idea if the link to a PDF in the HTML file will be available on windows tablets 8?

  I do an application of sale that links inside with our brochures.

  These links should be updated, as the brochures are getting a lot of updates.

  I thought to put the pdf files in the HTMLresources folder and place a button link to this file in the folder.

  But it does not work on a Windows 8 tablet.

  Is this something that is planned for a future release?

  No work around, sorry. We will address this issue in our next release.

  Neil

• DW 8 to play the swf file in a pop-up window

  The swf file plays well with the source file (flv) on the streaming server. See page http://www.jobclub.com/testing/healthcare.html profile video job open in the Center. What I want to do is to have ITI play in a pop-up window.
  
  But I can't understand how to play the swf file in a popup window
  
  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase ="" http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0,28,0 ' < script type = "text/javascript" > "
  AC_FL_RunContent ('codebase',' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0.28, 0', 'wid th', '285 ', 'height', ' 231', 'title', 'HealthSouth', 'src', 'eva, evaemp, HC240', 'quality', 'high', "pluginspage", 'http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwa veFlash', 'film', 'eva, evaemp, HC240' ); end AC code
  < /script > < noscript > < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase =" http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9, 0,28,0 ' width ="285"height ="231"title ="HealthSouth">" "
  "< param name ="movie"value="eva/evaemp/HC240.swf "/ >
  < param name = "quality" value = "high" / >
  "" "< embed src="eva/evaemp/HC240.swf "quality ="high"pluginspage =" http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash " type =" application/x-shockwave-flash"width ="285"height ="231"> < / embed >
  < / object >
  < / noscript >
  
  Thank you
  Matte support

  Do you really want to open a new window, or you just want to display a hidden layer that resembles a pop - up?