EliteBook 840: unable to boot from usb flash

Similar Questions

• HP pavilion 5CD3081TFX g6: hp pavilion g6 5CD3081TFX unable to boot from usb

  My hp pavilion g6 5CD3081TFX unable to boot from usb, since I have to clean install my Windows 10 operating system, when I press f10 after restart it asks password Admin, when I enter the password it shows disabled system? Any solution?

  @Suryakant2015

  Enter: 41694304

  Kind regards

  DP - K

• Satellite A300 - Boot from USB Flash Drive

  Is it possible to make my laptop boot USB flash drive?
  I checked the BIOS settings, but could not find anything that allows the boot from USB.

  > So after 40 hours there is no one who can answer this question 'complex'... strange forum.
  Hay buddy, you have good sense of humor ;)
  Do you really believe that someone to sit here and wait for your non-complex question? ;)
  Anyway, this issue is so simple and you don't need to ask someone here. If you do not find option bootable BIOS to set USB peripheral device for me is logical that this will not work.
  Please check the BIOS settings.

• HP 15-af131dx: unable to boot from a flash drive

  My HP 15 - af131dx don't let me boot from a live bootable flash drive. I was able to boot from the drive on my hp mini 110 computer and in the past, I ran Ubuntu on a USB key and it worked fine. What should I do?

  Hi @HPlaptop51,.

  Thanks for the HP forums post!

  I read your post and wanted to help. I understand you want to boot from a USB drive on your 15 HP - af131dx. Please try to access the boot device Options and select boot from USB drive.

  To access the Boot Device Options, turn on the computer and immediately press ESC to display the Start Menu and press the F9 key. The USB key may not appear in the menu of Boot Device at all, unless these an optical disk drive or USB drive is turned on, plugged in and holds a bootable media source.

  Let me know how it goes.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Can't boot from USB Flash Drive on Yoga 13

  I had a USB bootable with linux on it live and I tested it it works on another computer but I can't get my Yoga to boot from it. I wet to settings-> General-> advanced startup and then I clicked on the option USB but the computer is restarted, he said that there is no bootable USB devices. Someone able to boot from a flash drive?

  Hello and welcome,

  What linux distro do you use, and it is able to start on a UEFI system?

  I'm guessing here since I don't have a machine like yours, but I guess that BIOS refuses to see the USB if it doesn't have an appropriate structure of UEFI boot on it.

  You may be able to start the flash player by accessing the BIOS and setting the mode of inheritance.

  Z.

• HP 15 r036tu: unable to boot from USB

  I'm unable to boot from a USB key, I started correctly the USB, it works on other laptops but not on mine. I also changed my boot order in the bios, but still, I'm not able to boot from USB. I read somewhere that it's because of security windows 8.1 can you help me with this.  Thanks in advance

  The trick to this is to use a utility that will make your USB boot EFI and MBR.

  The following link goes to a third party site with free downloadable open source utilities to do exactly that and even more.

  http://www.RMPrepUSB.com/tutorials/127-make-dual-32-64bit-PE

• Unable to boot from USB 3.0 E430

  Hello community!

  I recently got a ThinkPad E430, and I love it.  I have a minor problem with the boot.

  As a Linux user, I regularly boot from usb and cd while trying different distributions and whatnot.  However, I discovered that I can't boot from my USB 3.0 ports.  Not only that, but my computer does not start if I have nothing plugged into them.

  I first thought that I had faked my dd command in the transfer of the image, but the usb key works from the 2.0 port. So I thought maybe it was the usb key itself, but this happens with all my usb 2.0 flash drives and 3.0.

  I noticed a recent bios update a few days, but I don't want to go through the trouble, if she does not really bring all the benefits.  Actually looking at the itt changelog says that it only supports to the B430.

  I guess I would really just know if others in the face of this problem.  Thank you!

  My E430 fine boots of USB3.0 ports.

• Elitbook revolution 810 G2: unable to boot from USB Elitbook turn 810 G2

  Hello

  Initially, I bought 810 rotate with 8.1 Pro window.

  I've recently upgraded to 64-bit Pro 10 Windows.

  The problem is that I can not boot from USB. Computer recognizes the USB drive but when I click F9 and enter in bootmode... He acknowledges as "drive hard usb ' but when I select it... it has no effect and does not start.

  Could someone help me solve the problem? I need to be able to boot from USB drive...

  Thank you

  Windows 10 64-bit with UEFI can only boot from a GPT partition. It may be that your boot USB drive is partitioned as MBR [Master Boot Record] and should be partitioned GPT [Table of Partition GUID] for UEFI.

  Create bootable USB key with UEFI support

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Unable to boot from USB or ODD after that windows 8.1 update on P850 - 31L

  Hello

  I just updated a P850 - 31L for windows windows 8.1 8 by the windows store.

  Before the update, I was able to boot from a USB key by pressing F12 during the boot upward.

  After the update I was more able to boot from the USB drive. Select the USB key by changing the boot order in the setup of the BIOS via F2 or pressing F12 is no longer works.

  Booting from ODD also is no longer possible.

  The version of the BIOS is 6.70 and does not secure boot must be disabled. However the DVD and the USB I tried are signed Ubuntu 12.10, who worked before the upgrade. Fastboot in windows 8.1 is disabled.

  Then, this seems to be a bug in the BIOS Toshiba? Or a windows 8.1 update the BIOS or the boot EFI in a way partition replace the BIOS setting? Really stuck here, does not seem to be much information.

  Any ideas or help would be very appreciated!

  Thank you

  Michael

  Update: I just tried to boot from the DVD of windows recovery 8 Toshiba and this does more or the other.

  Post edited by: michael_toshiba_forum

  OK I fixed that.

  First of all, it is to note that it is possible to turn off secure in the 6.70 BIOS startup.
  However this option is only available when the password is not defined in the Security menu.

  After activation or deactivation of the password a reboot is necessary to make the secure boot toggle option is available or not.

  It's good that I guess I assume that it can prevent secure boot are disabled when the machine is running. However this does not seem to have been associated with this problem.

  I selected the option "reset to factory defaults" in the output menu.
  The machine is then able to boot from USB and DVD. The boot order was also respected.

  Perhaps upgrading windows 8.1 corrupt invisible somehow the BIOS settings. Or maybe it was just a stranage coincidence that the BIOS itself corrupted during the installation. Anyway this factory reset fixed.

• Iconia Tab 8 W unable to boot from USB

  Hello

  I'd love to start my Iconia Tab 8 W of a USB, UEFI has the option to boot from USB or PXE so that I do not suspect that it supports that in one way or another.

  Currently I have no luck with a simple OTG drive, I am able to access it from the same created the boot of Windows media, but no chance to see the drive in the menu of the UEFI (even the start menu only sees the Windows boot loader).

  Anyone has any ideas, how to proceed? I don't see any dock available for the Tablet here, but if there are some I would be headed in the direction (even if it is part of another series of the device).

  Thank you

  In fact I find the question why the installation CD is not recognized.

  Apparentely UEFI AEP 64-bit systems, most, but here, on this tablet UEFI is 32 bits, which is quite rare. I start different bootloader (rEFInd) who works with IA32, and is now working on how to start the * bleep * core so I can install the system. If anyone has any ideas I'm open.

  I'll keep this open and update once that I make it work with a solution how to install Linux on this...

• Unable to boot from USB recovery media

  I created my usb successfully recovery media using a pendrive of 32 GB. Of course, I don't want to test it. I started my ultrabook, and however, it would not begin the recovery USB. Clues? I pressed ESC several times and came in the start menu.

  F1 system information

  F2 System Diagnostics

  F9 boot device Options

  F10 BIOS Setup

  F11 recovery system

  You are the very welcome.

  A way of knowing whether worked or not, usb recovery flash drive support and is to make an another bootable usb flash drive to test whether or not it is the laptop.

  The fact that you could not start the flash from another PC drive leads me to believe that the creation of recovery has failed.

  Here is the link to the instructions and tools you need to make a bootable flash drive general.

  The two files that you need are at the bottom of the page.  The bootme.zip file is just the BACK files that you extract, copy and paste once the other file actually formats the flash drive to make it bootable.  In this way, it is a speedy BACK and from there you can just go out.

  I use this tool to update the firmware on HP Business Desktop PC processor.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• Envy Touchsmart Ultrabook - boot from Usb Flash or optical drive

  I just this envy Touchsmart Ultrabook (14 inches) with 8 win and it works very well, but one thing that I can't make it work is to be able to boot from a USB stick or a cd usb player.  This system doesn't have a built-in optical drive.

  I changed the configuration Bios Boot UEFI for Legacy and also re arranged the boot order so the USB drives are before the internal hard drive.  I also tried to change setting USB 3 auto... still not able to boot from a usb device.

  Both the usb flash drive and cd drive to boot on my HP desktop and I recently tried the usb flash drive on a new laptop Lenovo comes with Win 8 and it worked.

  I need to do so that I could run my backup - Acronis True Image software.

  Any suggestions on what then try?  Thank you.

  Yours is a laptop very different mine - so this may not apply... but you can try what I posted here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/bios/m-p/2260991

• Boot from USB flash for Dimension 4600?

  I searched on the Dell support site to see if the BIOS

  on a Dimension 4600 will allow me to boot from a USB flash memory

  stick?  My BIOS is version A07, who apparently does not, but

  I wonder if all the versions of the BIOS for a 4600

  Let him?  I don't want to Flash my BIOS if there is anything that I need

  the new versions of BIOS, but I'm also curious about hyperthreading

  the most recent BIOS functions.  I wish there was a list of improvements

  each version of the BIOS on a single page.  I have not found a way of

  determine what has been added in each version of the BIOS after A07.

  Thank you

  If the USB device is present when you turn it on and is bootable, it is possible to change the boot priority order.  The device must be bootable however.  I use Sandisk Cruiser readers to ADAPT because they don't stick as to be broken and are easily hidden if hooked up to the rear of the machine.

• Unable to boot from USB thumbdrive running ESXi 5

  I have a workstation xw6600 I used as my sandbox for ESXi from 4.0. So I decided it was time to become familiar with ESXi 5, so before starting to run our upgrade to ESXi 5 in all our servers I wanted to update my own sandbox. I tried first of all to make an update to 4.1 update 1 who does not like I special HP drivers installed, so I decided to make a brand new install ESXi 5 using VMware bootable CD. The installation seems to be successful, but when the supposed to reboot from the USB system I get the typical mistake of the BIOS indicates that no BONES were found "no disk system or disk error." ». For a year I've been running ESXi in this system without problems. I am currently starting from 4.1 update 1 from a USB, if I look that the problem was the installation process in my sandbox (after hours of troubleshooting and several creations of CD), so I did an installation in one of our server (DL360G7). Everything went find I could only start in ESXi 5 no problem (using the same CD I create above). I took this USB to my sandbox and tried to boot from it and still the same error. I can not even boot my laptop from the USB. Does anyone know what changes to the startup procedure in ESXi 5 compare to ESX 4.0?

  From my understanding, if you create a new 5.0 installation, then it will only start using UEFI.

  However, if you upgrade an ESXi in 5.0, it retains the original MBR boot.

  See you soon.

• Unable to boot from usb drive on lenovo ideapad z585

  Hello

  I created a Memtest + USB key which works very well on my desktop PC but it will fail to start on my Lenovo Ideapad Z585, it just goes right to the quick connection of Windows 8 despite pressing F12 and selecting the Generic USB 2.0 device in the boot device menu.

  Any suggestions please? Thank you.

  Edit - Boot USB is enabled in bios.

  Edit - the USB is detected as it is listed in the start menu and the bios but cannot simply start and I like I said before, it starts up fine on my desktop PC.

  Edit - I tried an another USB drive, the same problem.

  Hello
  Could disable you secureboot and uefi BIOS? He helped in many cases.
  Concerning