EM 326 G will not maintain a ringtone

Similar Questions

• Apple TV will not maintain a connection with my Samsung

  Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

  HELP, PLEASE.

  Which TV model you have?

• WRT160N will NOT maintain the connection. Wireless connects to all the...

  Comcast ISP

  I can connect directly to a cable modem and internet access. But when I try to use the Linksys WRT160N I get wired access, but not wireless.  Then, in 1 minute, I get NO connection.  I searched this topic (via several titles and not much info).  There seems to be a lot of us have problems with this router.  Any suggestions...?  Thanks for your time and your efforts...

  Greg

  I did not 'time' to connect directly to a cable modem.  After about 5-7minutes I became poor connections and the lights on the modem have been reset.  I bought a new modem and now my connections are stellar!  My wife asked me if I was doing something to improve our speed of connection...! :-)  Nope, probably cables/modems goes wrong!

• Smartphone Ringtones blackBerry will not be displayed on the device, but are on my card.

  I put mp3 ringtones on my 9530 via Media Manager in Desktop Manager 5.  I did several battery grips and the tones I put on it will not show up in my ringtones.  I put them on the map of support and no device.  I tried a second time and two of each tone appear in the Media Manager, but not on the device.  I had this happen before, but usually a battery pull fixes the device.  Help please.

  Hello

  Go to the hidden file /ringtones show and remove the BBTHMBS. DAT file it as an index to theBlackberry file.

  Traction battery, let the device reindex and see if they appear.

  Thank you

  Bifocals

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• Just upgraded to El Capitan. Now my MF4350 (USB) will not be printed. He maintains a break himself. I have tried reboot, power, re - install drivers, etc.. Suggestions?

  Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox.  I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?

  Adding the printer screen says UFRII LT.

• Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

  When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

  Hello

  1. have you made changes on the computer recently?

   
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
   
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!

• After downloading firefox Betaicone will not mount on Mac ibook G4

  Downloaded firefox beta and the icon doesn't mount not so it will not install if I should try another version

  Unfortunately, last version of Firefox (version 10) supports only Mac OS X 10.5 or higher Intel processor. The system you are currently using is no longer supported by Firefox.

  For now, Firefox 3.6 is to be maintained and supported by Mozilla. You can upgrade to it as follows:

  1. Open the Applications folder.
  2. Drag the Firefox application to the Trash.
  3. Download and install Firefox 3.6 from here.

  Note that Firefox 3.6 support will cease soon (April 2012). After that, you can use another browser like Firefox on your system (TenFourFox). Remember that TenFourFox is not prepared or approved by Mozilla in some way.

• I continue to have reset Firefox, my address bar search will not work without the constant delivery in all; config

  I had to reinstall all my programs and for some reason I have problems adding and maintaining my address bar search option as well as maintenance of my Google search engine. I deleted Yahoo 4 times in the search box and I went in: config to change the engine and the address bar search whenever I start Firefox. It will not stay on-site every day. Can anyone help with this?

  Hi pmnewell,

  You should read the article How to fix preferences that will not save.

  Hope this helps!

• Installation of HP will not install on Windows 7

  HP 3210 all-in-one will not install on win 7 all your solutions have me chasing my tail for about 2 days... Please help

  Mike Garrotto

  It is a forum for users of peer-to-peer supported. HP maintains no official presence in this forum.

  When you request support, please provide the HP model name and/or product full number of the material in question. In addition, please provide brand and full model name or number of the computer used. Also indicate what you're trying to do and how the equipment is connected between them.

  Please send Bravo

• Photos will not open the iPhoto on an external drive, already "migrated" library

  I moved my iPhoto to an external drive library, updated, then "migrated" photo library with the drive connected. Once I opened the Photos without the drive connected, and there is a library 'Photos' of 9 seemingly random photos. Now, the pictures will not open the old library with the drive connected. Is there a way to change the pictures in the library accesses?

  Here's the disclaimer that I get: the contents of the iPhoto 'iPhoto Library' library has already migrated to the Photos.  Open the Photos to display your library or use a compatible version of iPhoto to open the iPhoto library.

  (But it does not open the library on the external hard drive).

  Photos of the Lauch with Opiton maintained key pressed if you get this window:

  

  Search and select the library located on the EHD and click Choose library.  The location of the selected library will appear just below the window.

  

• Equium A300D will not be market or start - stuck on the eve

  Hello

  Toshiba support staff,

  I have a Toshiba Equium A300D who suddenly decided to not turn on - I have pressed the power button down, alt del, shot control button
  it exceeds to find a reset button and found no button at the back - don't know if there is any other command key that I can use so he can start.

  Can someone out there suggest what I can do?
  It is as if he is trapped in mode 'sleep'.

  Satellite light isn't on one or things of the touchpad will not turn on...

  Thank you

  Barbara

  > Toshiba support staff.
  First of all, it is a forum from user to user, I doubt that you will find here a people of Toshiba

  > I have a Toshiba Equium A300D who suddenly decided to not turn on - I have pressed the power button, maintained alt del, shot control
  it exceeds to find a reset button and found no button at the back - don't know if there is any other command key that I can use so he can start.

  Try this:
  Remove the battery, disconnect the adapter
  Wait several minutes (30 minutes), then reconnect the two parts.

  Then try to turn on the machine.
  Check it out and post the results.

  Good luck

• Why iPhoto will not update to 9.6.1

  Bought my iMac about six months ago and have done all updates as needed but for some strange reason maintain iPhoto app saying there is an update too 9.6.1 Mar 19 2015 but whenever I try to download the update, he said no available my mac is updated to OS X EL Capitan 10.11.2 if it makes no sense.

  Also taken holiday snaps on a camera downloaded on IMac, they are there but will not transfer on six iPhone?.

  Thanks in advance.

  What version of iPhoto you have installed?  IPhoto come preinstalled on your Mac? And you are the first owner of this Mac?

  The update is available, if you have a version of iPhoto, associated with your AppleID on the App Store.

  Have you ever checked the purchases of the AppStore tab and pressed the Accept button next to iPhoto to associate with your AppleID?

  See user tip of Barney: cannot be updated iPhoto because it is not available in the App Store

• Jet 7 Tablet not will not load.

  See, the problem is, whenever I plug in the charger, it says plugged in, does not support. It may be the charger because I tried to use my charger of both sisters, and my charger works very well for his. It seems to work less and less each time I turn on the tablet. I tried to plug it into several different outlets as well. I don't know if its because of the battery, or if it is the charger port. Whatever it is, it is not done better, soon it will not even be the most. He charges that very slowly when it is off, about 10% every two hours. I'd love any help that anyone can give me.

  Sorry to be paranoid, I think I found the problem. It is with the charger port, I think that it is unable to maintain the small pieces on top of the charger. If I hold it a certain way, or if I tap the charger on the back of the Tablet, she collects very well. Thanks for answering me.

• Windows edits 972145 KB and KB 973540 will not - install error 800b0100 message

  There are two updates will not be installed on my laptop. (Vista 32-bit). This is the only update where I have a problem.

  Have you tried a problem with preparation system detected no effect tool

  Problem of Windows and reports show the following

  Update Windows failure - o/s. 7.4.7600.266, 2057 792711406 bucket and bucket 748412871 locale ID

  I also have the failure of maintaining Cbs 6.06.6002.2.2.0768.3 package parameters ID 2057 regional bucket 682643163

  Any suggestions as to how I can fix this?

  Some troubleshooting methods mentioned in this article
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/e21cbdbb-49ce-4057-b289-f2182a85c87f TaurArian [MVP] 2005-2010 - Update Services