WRT160N will NOT maintain the connection. Wireless connects to all the...
Comcast ISP
I can connect directly to a cable modem and internet access. But when I try to use the Linksys WRT160N I get wired access, but not wireless. Then, in 1 minute, I get NO connection. I searched this topic (via several titles and not much info). There seems to be a lot of us have problems with this router. Any suggestions...? Thanks for your time and your efforts...
Greg
I did not 'time' to connect directly to a cable modem. After about 5-7minutes I became poor connections and the lights on the modem have been reset. I bought a new modem and now my connections are stellar! My wife asked me if I was doing something to improve our speed of connection...! :-) Nope, probably cables/modems goes wrong!
Tags: Linksys Routers
Similar Questions
-
Apple TV will not maintain a connection with my Samsung
Apple TV will not maintain a connection with my Samsung TV UHD. All other devices work well with it. I tried switching ports HDMI and cables without change. Apple TV can turn on and turn off, plug in for 10 seconds, or not at all. (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)
HELP, PLEASE.
Which TV model you have?
-
I've updated to Firefox 8, now, it will not keep Me connected to all the sites!
Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in again, even if on some sites it's to remember my username and password (just do not keep me logged).
I tried to delete all cookies and history and still nothing.
Does anyone else have this problem?
In the privacy section of the Firefox options, make sure that Firefox is configured to accept cookies and that it is not set to clear history of Firefox closing.
(If you use the default "Remember history" then it should work fine. If you use the "customized for the history settings" setting, and then make sure that "Accept cookies" is checked and "clear history of Firefox closing is not checked.)
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f
I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.
I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.
iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2
-
6 days years Samsung Mega 6.3 - Skype will not complete the connection process
I downloaded Skype on my Samsung Mega 6.3 new since I use Skype at work for messaging and want to be able to use it on my new phone like I did on my previous (iphone 4) when you work remotely.
After entering my microsoft account information, it tries to connect, but starts a loop where it climbs from the home screen to the loading screen and back Skype, constantly.
If I press the back button, it will make starting Skype and considered as being active on my header bar, but if I try to pull up, we start the loop.
Phone AT & T. cannot change my APN settings, so change my proxy to 0 will not fix the problem.
Have you tried to empty cache. No help.
Have deleted and reinstalled several times now (I think I'm on 5).
Ideas people? Or I'll just have to in the loop and wait for the next update to use this great software?
Looks like the update today resolved my problem. I can now use Skype without any problems.
-
Original title: Media Player all of a sudden will not play the dvd.
Suddenly, I can't play DVDs on my laptop. The error message is: Windows Media Player cannot connect to the server. The name of the server are may not be not correct, ther server name maybe isn't available, or your proxy settings are may not be not correct. Any suggestions on troubleshooting of Microsofts page appear to be relevant.
Hi mcraigQY
1. when exactly you get the error message?
2. you try to listen to music from any remote location or try to play a DVD?
3 have you tried to play a different CD or DVD?
4. what happens when you play the same DVD on another computer?5. for how long have you been faced with this problem?
6. the DVD folder that you are trying to play supported by the windows media player is it?
7. What is the type of DVD that you try to play?Let us know the answers to help you best.
-
Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine. Any ideas?
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is the instance of Vista installation.
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads
Adjust settings, manage user accounts.
Try the Forum above to repost, if necessary.
See you soon.
Mick Murphy - Microsoft partner
-
Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.
Hello
You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud
Also try:- cloud creative connection errors
Hope this helps!
-
Windows 7 will not detect THE routers wireless, including mine.
Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!
Hello
Thank you for contacting Microsoft Community.Is properly installed wireless adapter driver?Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.Response if the issue is not resolved. -
Satellite L300 will not let me connect
My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen
Help!
Who knows what's the problem here?
Maybe you should install new OS. You can enter boot options using F8 at startup?Repair my computer option is available?
-
I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.
Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.
WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.
Any help would be appreciated.
Thank you!
Hi Jonathan,.
I see that you two computers on the network cannot see each other. I'll help you with this problem.
1. don't you make changes to the computers?
2 are computers on a domain network?
3. do you have a router connected to these computers?
Method 1:
Open the HomeGroup troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter
Method 2.
Make sure that the following services are enabled on the computer.
(a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:
-TCP/IP NetBIOS Helper service
-DNS Client
-Function Discovery Resource Publication
-SSDP Discovery
-UPnP device host
To start the service and set it to automatic, follow these steps:
(b) right click on each of the services listed above and click Properties.
(c) click the general tab, and then, next to startup type, select automatic.
(d) click on apply and then click Start.
Method 3.
I suggest you follow the steps in this article.
Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery
Method 4:
Why can't I connect to other computers?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers
Refer.
Homegroup:
http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Pair cant my apple wireless keyboard for my new tv4 apple... He will not be the Apple TV and not ask the pairing code enter... Anyone know what I need to do?
The ATV4 does not work with any wireless keyboard. The only alternative to the built-in function 'keyboard' is the iOS app.
-
IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse
I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800. I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons. I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device. The software installed with no problem, but it will not detect the mouse and I can't program the buttons. On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID). The mouse works with the basic functionality, but I need to program the buttons
Hi John,.
If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.
For confirmation, this is the link for the latest driver:
http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
http://www.Microsoft.com/hardware/en-us/support/contact-usPlease let us know if you have more queries on Windows.
Maybe you are looking for
-
Satellite L300D - power connector broken
I got my wife a L300D about 4 months ago now, and it has been a good computer.Correct autonomy and the screen is big. That's all she needs. However, I run into a very big problem. All being 4 months since we got it, we'll have major issues with the p
-
What should I do if my permission has been reached?
I had to reformat my computer and every time I re-authorized and now I've reached the limit and cannot allow the same computer.
-
Windows 7 starter with xbox 360
good then it is a problem that has baffled me. so I tried to set up my laptop with windows 7 starter to my xbox.it says he can't because he is not a media center for the Starter edition.then I learned about the piece to option. what looked like it wo
-
How can I get my headphones or my built in speakes to work in my computer.
The speakers on my monitor will not work. And won't be in the head when I plug them in phones. I had the headset working for a little while, and then they just stopped. I ran a scan on hardeware and devices and the helmet worked for one minute in the
-
OfficeJet 6812: I get a print head error message
I get the error message "problem with printhead. I tried all of the suggestions I found on the forum and am unable to solve the problem. I spoke with a representative chat, and she asked if he was allowed to have a technician call me. I said ok and g