Embed the PDF file in the HTML area

Hello

I have a simple report - with a link to view an underlying document. The document is displayed on a separate page with a HTML region. Say the file to display is statement.pdf and it is has already been transferred to the images of the apex. There is a hidden field P3_FILENAME on the view page. This gets the value of the report. On the HTML region:
<div style="">
<embed height="600" width="1200" name="Statement" src="#WORKSPACE_IMAGES#&P3_FILENAME." type="application/pdf" />
</div>
but it does not work. However, if I simply do this and 'run' the page - it displays very well.
<div style="">
<embed height="600" width="1200" name="Statement" src="#WORKSPACE_IMAGES#statement.pdf" type="application/pdf" />
</div>
Looking at the source of the failing resulting page I can see that the values were set successfully.

Any ideas?

Thank you
P

I think that the HTML code is the search of explicit & P3_FILENAME. and can't find it because it is referenced by the HTML renderer instead of the PL/SQL engine that would manage the substitution of variables.

Try to create a PL/SQL region where you write the divs as strings using the DBMS_OUTPUT. PUT_LINE. I use it to create fairly complicated reports and it works very well to let me do a substitution of variables between my HTML code. Here's a simple example (mine is a procedure that that gives the word for food in page variables):

create or replace PROCEDURE PROC_DASH_SAFETY(x_org NUMBER, x_dt DATE)
AS
  v_dt_disp        VARCHAR2(15);
  v_dt             DATE           := x_dt;
  v_org_id         NUMBER         := x_org;
  v_fact_id        NUMBER;
  v_org_nm         VARCHAR2(47);
  v_org_tz         VARCHAR2(4);
  ontime           VARCHAR2(47);
  v_saf_ct         PLS_INTEGER    := 0;
  v_eff_ct         PLS_INTEGER    := 0;
  saf_aud_t        NUMBER;
  saf_aud_a        NUMBER;
  eqp_aud_t        NUMBER;
  eqp_aud_a        NUMBER;
  saf_chk_t        NUMBER;
  saf_chk_a        NUMBER;
  saf_loss         NUMBER;
  eff_mpg_t        NUMBER;
  eff_mpg_a        NUMBER;
  eff_idl_t        NUMBER;
  eff_idl_a        NUMBER;
  eff_brk_t        NUMBER;
  eff_brk_a        NUMBER;
  pm_tgt_pct       NUMBER;
  pm_ct            INTEGER;
  pm_act_pct       NUMBER;
  pm_done          NUMBER;
  pm_ovrdue        NUMBER;
begin  -- 100
  select ORG_NM, TZ into v_org_nm, v_org_tz from ORG_ENTITIES
   where ORG_ID = v_org_id;
  v_dt_disp   :=  to_char(v_dt,'MM/DD/YYYY');
  ----------
  select CASE WHEN v_org_tz = 'MST' and sysdate - v_dt < 33/24
                 THEN 'Yes'
            WHEN v_org_tz = 'MDT' and sysdate - v_dt < 33/24
                 THEN 'Yes'
            WHEN v_org_tz = 'MST' and sysdate - v_dt >= 33/24
                 THEN 'No'
            WHEN v_org_tz = 'MDT' and sysdate - v_dt >= 33/24
                 THEN 'No'
            WHEN v_org_tz = 'CST' and sysdate - v_dt < 32/24
                 THEN 'Yes'
            WHEN v_org_tz = 'CDT' and sysdate - v_dt < 32/24
                 THEN 'Yes'
            WHEN v_org_tz = 'CST' and sysdate - v_dt >= 32/24
                 THEN 'No'
            WHEN v_org_tz = 'CDT' and sysdate - v_dt >= 32/24
                 THEN 'No'
            WHEN v_org_tz = 'EST' and sysdate - v_dt < 31/24
                 THEN 'Yes'
            WHEN v_org_tz = 'EDT' and sysdate - v_dt < 31/24
                 THEN 'Yes'
            WHEN v_org_tz = 'EST' and sysdate - v_dt >= 31/24
                 THEN 'No'
            WHEN v_org_tz = 'EDT' and sysdate - v_dt >= 31/24
                 THEN 'No'
            WHEN v_org_tz = 'PST' and sysdate - v_dt < 34/24
                 THEN 'Yes'
            WHEN v_org_tz = 'PDT' and sysdate - v_dt < 34/24
                 THEN 'Yes'
            WHEN v_org_tz = 'PST' and sysdate - v_dt >= 34/24
                 THEN 'No'
            WHEN v_org_tz = 'PDT' and sysdate - v_dt >= 34/24
                 THEN 'No'
            ELSE 'No'
       END as PRINT_TIME
  into ontime
  from dual;
  ----------
  htp.p('

Dashboard information is confidential. Refer to your employee handbook for confidentiality guidelines.

'); --htp.p('

'|| v_org_nm ||' on '|| v_dt_disp ||'

'); htp.p(''); htp.p(''); htp.p(''); htp.p('
Dashboard for '|| v_org_nm ||' on '|| v_dt_disp ||' Dashboard run on time? '|| ontime ||'
'); htp.p(''); ---------- --Safety htp.p(''); select COUNT(ID) into v_eff_ct from VF_TARGET_PERF where ORG_ID = v_org_id and v_dt between BEGIN_DATE and NVL(END_DATE,sysdate); IF v_eff_ct = 1 THEN select MPG, IDLE_TIME, HARD_BRAKES into eff_mpg_t, eff_idl_t, eff_brk_t from VF_TARGET_PERF where ORG_ID = v_org_id and v_dt between BEGIN_DATE and NVL(END_DATE,sysdate); ELSE eff_mpg_t := 0; eff_idl_t := 0; eff_brk_t := 0; END IF; select SUM(TRIP_DISTANCE)/SUM(TRIP_FUEL), SUM(HARD_BRAKE_COUNT), SUM(IDLE_TIME)/SUM(TRIP_TIME)*100 into eff_mpg_a, eff_brk_a, eff_idl_a from PEOPLENETIF.TRIP_DATA where TRUNC(TRIPSTART_TIMESTAMP) = v_dt-1 and VEHICLE_LABEL IN (select EQUIP_TAG from EQUIPMENT WHERE ORG_ID = v_org_id and EQUIP_TYPE_ID = 1) and TRIP_FUEL > 0 AND DRIVING_MPG <= 10; htp.p(''); EXCEPTION when VALUE_ERROR then dbms_output.put_line('VALUE_ERROR exception raised'); end; /

Tags: Database

Similar Questions

  • you attempt to add a web form of Business Catalyst to my site Web of Adobe Muse (via insert html) and the shape is cut all the content below where to place the html area.

    You attempt to add a web form of Business Catalyst to my site Web of Adobe Muse (via insert html) and the shape is cut all the content below where to place the html area. I tried the basic troubleshooting and it's only when I insert a form of Catalyst Business that my web page is cut, where is the bottom of the form. I use this code when you insert form BC in Muse,

    "< div class ="bulletin of information-form"> < form name ="catemaillistform58787"onsubmit ="return checkWholeForm58787 (this)"method ="post"action =" http://theincitejournal.BusinessCatalyst.com/CampaignProcess.aspx?ListId=53681& OPTIN = true & PageID = / index.html"> < div class ="form"> < div class ="item"> < label for ="CLFullName"> full name < / label > < br / > < input class ="cat_textbox_small"type ="text"name ="Full name"id ="CLFullName"maxlength ="255"/ > < / div > < div class ="item"> < label for ="CLEmailAddress"> E-mail address < / label > < br / > < input class ="cat_textbox_small"type ="text"name ="EmailAddress"id = '" "CLEmailAddress" MaxLength = "255" / > < / div > < div class = "item" > < label > Enter Word verification in box below < / label > < br / > {module_captchav2} < / div > < div class = "item" > < input class = "cat_button" type = "submit" value = "subscribe" id = "catlistbutton" / > < / div > < / div > < script type = "text/javascript" src = "http://theincitejournal.businesscatalyst.com/CatalystScripts/ValidationFunctions.js" > < / script > < script type = "text/javascript" > '

    The only settings I did took the H3 header on opt-in and page navigation after the action to get rid of the opt in BC function as default. I tried to download the source code as well and I'm having the same problem. The web Page is here " copy " and a version of what I was creating the page to look like here is ' home ' As you can see, the 'House' version allows me to scroll past where I would have placed the shape box while the 'copy' stops at any user to parade before. I have called the shape slightly from the "development" of British Colombia under the style sheets tab and still tried to trouble shoot and get rid of the code to see if it affects something and it did not add style. For some reason only the HTML to the form is but I cannot understand what the section of the code would do that. Any ideas?

    I see that you have inserted a script tag open that you forgot to close, which generates errors on the page and prevent it from be returned correctly. You should ensure that the code that you insert in the Muse is syntactically correct.

    - Abhishek Maurya

  • Change the font back sentences in the HTML area.

    Hello

    I have a problem on the subject to change the font of the sentences back in the HTML area.

    I tried using the 'font' and 'size' in the HTML area. But it does not work. The police of "This is a paragraph", does not change regardless of any size.

    Help, please.

    Published by: user10458244 on October 22, 2008 02:49

    < span style = "do-size: 15px" > This is a paragraph </span >

    should do the job.

    Denes Kubicek
    -------------------------------------------------------------------
    http://deneskubicek.blogspot.com/
    http://www.Opal-consulting.de/training
    http://Apex.Oracle.com/pls/OTN/f?p=31517:1
    -------------------------------------------------------------------

  • Display of the image in the HTML area?

    I made white page, and on this page I made html area. Then I click on the shared components > Images create and download the DMD.gif image
    at the request of 106, the application with which I work. I try to put that image in the html area.

    The region html Source, I put this code, but it does not work:

    . <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
    . < html xmlns = "http://www.w3.org/1999/xhtml" >
    . < head >
    . < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
    . < title > Untitled Document < /title >
    . < / head >

    . < body >
    "/ img src="/i/DMD.gif "align ="top ".
    . < / body >
    . < / html >


    I'm workin with Application Express 2.1!

    Published by: user10187476 on August 27, 2008 02:35

    When you download the image of the way you are, it is stored in #WORKSPACE_IMAGES # so you must reference it like that...

    Try: img src = "" #WORKSPACE_IMAGES # nom_image. "» JPG ".

    * ensure that the name of the image and the extension are identical to your upload, CASE-SENSITIVE

    Check out the manual... very useful

  • Is there a way to embed a PDF file on a web page of MUSE?

    Is there a way to embed a PDF file on a web page of MUSE?

    A cool way is to view it in Google Docs Viewer PDF. Add your PDF file in the dialog box "Add files to download", then insert it into an HTML object, change 'Yourdomain' and 'YourPDF' areas to match to your

  • When I load my golf to my pdf files it keeps html

    When I try to down load my lessons of golf as my adobe reader software, it rises html how to down load to my pdf file

    Hi Derek,.

    It seems that the PDF file association is messed up.

    ·         You can open other files very well?

    ·         The PDF file opens in HTML format?

    Method 1: Try the following.

    a. right click on the PDF file.

    b. select open with. Check if you have Adobe Reader.

    c. otherwise, expand other programs.

    d. Select Adobe Reader, then place a check mark on the always use the selected program to open this type of file.

    e. click Ok.

    Method 2: You can also follow:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  • What is the best way to embed a PDF file in an article?

    The only way I could get this to work using an overlay of web to post a link to an online source.

    I don't want to create a button to the PDF file. I want to integrate a PDF file that is located in the HTMLResources.zip.

    Create a button to the PDF file. See DPS tips > Advanced overlays > links to PDF files, or read this web version of the Viewer:

    DPS tips advanced overlays: links to PDF files

  • Align the HTML area elements

    4.2.1

    Hello

    I have a region of html which I have 4 buttons, a text box, 2 select lists all vertically stacked. However, each of them are aligned to the left. I was wondering if there is a way to center align them by setting the HTML properties in the region?

    Thank you!

    "" Place the button properties of column and column attribute 2 and align = 'Center " respectively.

    (Why you want to do anything to look like that escapes me...)

  • Set the ID of the Table in the HTML area

    I want to be able to dynamically add rows in a table that is defined in an HTML area. I have the JavaScript code to do this, but it uses the ID of the table. TheAPEX ID of the table is dynamic and I tried to adjust the static ID of the region, but it is not related to the table tag. I can do this, or do I need a different approach?

    Version of the APEX?

    If it's a region HTML the HTML for the table is entered manually? Simply include a valid and unique id attribute in the element of array :

'); select COUNT(ID) into v_saf_ct from DASHBOARD_AUDITS where DATE_INDEX = v_dt and ORG_ID = v_org_id; htp.p(''); htp.p(''); htp.p(''); IF v_saf_ct = 1 THEN select LOSS into saf_loss from DASHBOARD_AUDITS where DATE_INDEX = v_dt and ORG_ID = v_org_id; select AUDIT_TARGET, AUDIT_ACTUAL, CHKRD_TARGET, CHKRD_ACTUAL, MECH_TARGET, MECH_ACTUAL into saf_aud_t, saf_aud_a, saf_chk_t, saf_chk_a, eqp_aud_t, eqp_aud_a from DASHBOARD_AUDITS where DATE_INDEX = v_dt and ORG_ID = v_org_id; ----Safety Audits IF saf_aud_t > 0 THEN htp.p(''); htp.p(''); IF ROUND(saf_aud_a*100/saf_aud_t,2) >= 100 THEN htp.p(''); ELSIF ROUND(saf_aud_a*100/saf_aud_t,2) < 100 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); htp.p(''); END IF; IF saf_loss = 1 THEN htp.p(''); ELSE htp.p(''); END IF; ----Equipment Audits --eqp_aud_t := 0; --eqp_aud_a := 0; IF eqp_aud_t > 0 THEN htp.p(''); htp.p(''); IF ROUND(eqp_aud_a*100/eqp_aud_t,2) >= 100 THEN htp.p(''); ELSIF ROUND(eqp_aud_a*100/eqp_aud_t,2) < 100 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); htp.p(''); END IF; ----Checkrides IF saf_chk_t > 0 THEN htp.p(''); htp.p(''); IF ROUND(saf_chk_a*100/saf_chk_t,2) >= 100 THEN htp.p(''); ELSIF ROUND(saf_chk_a*100/saf_chk_t,2) < 100 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); htp.p(''); END IF; ELSE htp.p(''); END IF; htp.p('
Safety
TargetActual%Loss Free Day?
Safety Audits'|| saf_aud_t ||''||saf_aud_a||''||ROUND(saf_aud_a*100/saf_aud_t,2)||'%'||ROUND(saf_aud_a*100/saf_aud_t,2)||'%-
Safety AuditsNo Audit Target set'||saf_aud_a||'-Yes
No
Equipment Audits'||eqp_aud_t||''||eqp_aud_a||''||ROUND(eqp_aud_a*100/eqp_aud_t,2)||'%
'||ROUND(eqp_aud_a*100/eqp_aud_t,2)||'%
-
Equipment AuditsNo Equipment Audits Target Set'||eqp_aud_a||'-
Check Rides'||saf_chk_t||''||saf_chk_a||''||ROUND(saf_chk_a*100/saf_chk_t,2)||'%
'||ROUND(saf_chk_a*100/saf_chk_t,2)||'%
-
Check RidesNo Checkride Target Set'||saf_chk_a||'-
This information has not been recorded.
'); htp.p(''); htp.p(''); htp.p(''); ------MPG htp.p(''); htp.p(''); IF eff_mpg_t > 0 THEN IF ROUND(eff_mpg_a/eff_mpg_t*100,1) >= 100 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); END IF; htp.p(''); ------Idle Time htp.p(''); htp.p(''); IF eff_idl_t > 0 THEN IF ROUND(eff_idl_a/eff_idl_t*100,1) > 100 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); END IF; htp.p(''); ------Hard Brakes htp.p(''); htp.p(''); --htp.p(''); htp.p(''); htp.p(''); ------Preventative Maintenance select COUNT(ID) into pm_ct from DASHBOARD_PM where ORG_ID = v_org_id and DATE_INDEX = v_dt; IF pm_ct = 1 THEN select PM_TARGET into pm_tgt_pct from PM_TARGETS where ORG_ID = v_org_id and v_dt >= START_DATE and v_dt <= NVL(END_DATE,sysdate); select PM_COMPLETE, PM_DUE into pm_done, pm_ovrdue from DASHBOARD_PM where ORG_ID = v_org_id and DATE_INDEX = v_dt; IF pm_ovrdue = 0 THEN pm_act_pct := 100; ELSIF pm_done > 0 THEN pm_act_pct := ROUND((pm_done-pm_ovrdue)/pm_done*100,1); ELSE pm_act_pct := 0; END IF; htp.p(''); htp.p(''); IF pm_tgt_pct > 0 THEN IF ROUND(pm_act_pct-pm_tgt_pct,1) < 0 THEN htp.p(''); ELSE htp.p(''); END IF; ELSE htp.p(''); END IF; htp.p(''); ELSE htp.p(''); htp.p(''); htp.p(''); htp.p(''); htp.p(''); END IF; htp.p('
EfficiencyTargetActual%
MPG'||eff_mpg_t||''||ROUND(eff_mpg_a,2)||''||ROUND(eff_mpg_a/eff_mpg_t*100,1)||'%'||ROUND(eff_mpg_a/eff_mpg_t*100,1)||'%-
Idle Time'||eff_idl_t||''||ROUND(eff_idl_a,2)||''||ROUND(eff_idl_a/eff_idl_t*100,1)||'%'||ROUND(eff_idl_a/eff_idl_t*100,1)||'%-PM''s
Hard Brakes'||eff_brk_t||''||ROUND(eff_brk_a,0)||''||ROUND(eff_brk_a/eff_brk_t,1)||'%-CompleteOverdue
PM Currency'||ROUND(pm_tgt_pct,1)||'%'||ROUND(pm_act_pct,1)||'%'||ROUND(pm_act_pct-pm_tgt_pct,1)||'%'||ROUND(pm_act_pct-pm_tgt_pct,1)||'%Set Target!'||pm_done||''||pm_ovrdue||'
PM Currency- %- %Enter PMs!- %----
  • How to convert the Variable containing the HTML must be interpreted as HTML in the HTML area

    To understand the issue, I have a table that stores the HTML code generated by user and type of report:
     USER      | REPORT_TYPE | HTML_GENERATED
    ----------------------------------------------------------------------------------------|
     TEST_USER |   TEST      | <HTML><head><title></title></head><BODY>TEST</BODY></HTML>   |
    On the page, there is a process that uses an anonymous PL/SQL block that is set on "on the charge before the header." Here's part of it:
    SELECT HTML_GENERATED into :P2_HTML
    from LN_DOCUMENT_LABELS
    where USER = :app_user AND REPORT_TYPE = 'TEST';
    The idea is to generate all the HTML code behind the scenes in another package.

    There is only one element on the page to store the variable in:
     P2_HTML     (Hidden) 
    Then I created an HTML region, and in the region, I wanted to call in the element, so I got back:
    &P2_HTML.
    The result just displays the HTML code:
    <HTML><head><title></title></head><BODY>TEST</BODY></HTML>
    Is there a way to force it to be the result of the HTML when the page?
    TEST

    You have a region of pl/sql with code like:

    begin
      htp.p(:P2_HTML);
    end;
    

    Who would send to your browser to display html code... However, you can confirm that the produced HTML code is valid...

    Thank you

    Tony Miller
    Ruckersville, WILL

  • Hey, anyone know how to embed a pdf file

    Hello

    If you want to allow visitors to click on a link and open a PDF file in the browser, then you can use "link to file" feature of the hyperlink tab.

    Please let me know if you are looking for something specific.

    Concerning

    Vivek

  • Link to a PDF file or an html page created in word

    I have a htm file created in word on my computer. (It's a table). How to link this file? Can I link a PDF file? Thank you.

    Hello

    Please see this topic for more information

    How can I view or add a PDF, DOC, MP3 or other file on my site for visitors to download?

    - http://forums.adobe.com/message/4509541#4509541

    Concerning

    Abhishek Maurya

  • When you create interactive PDF files in InDesign, buttons are down in the DC / Acrobat Reader

    Hello Acrobat Forum:

    I create an interactive e-book PDF I get incompatible with questions. I spent a lot of time trying to solve it, and I still have to find a solution. I have some configuration of navigation on a master page that I need to change the page level. These buttons should have a reverse effect, so the bearings must exchange. Most of the time these works. It is the 25% of the time this is a problem. And when there is a problem, they are not displayed. The final PDF is created an InDesign book with 5-6 papers in it. It has 6 layers with the top layer of mostly unprintable.

    That's what I tried:

    • Made sure all the layers in the ID book are exactly the same.
    • Handset of all horizons for the navigation and buttons on the same layer.
    • Exported with only the layer of activated navigation. This fixed the problem with the navigation, but once all the other elements have been added the problem came back.
    • Changed order of the layers. Same result with the loss of elements.
    • Excerpt from the page with the fall as they appear and buttons. As soon as I replace the page with this page the complete document, they give up.

    I use the latest version of InDesign (version 2015.4) and DC Acrobat (version 2015.017.20053).

    I have many more of these books, it is imperative that I find a solution in the future.

    Thank you.

    Scott Silva

    Nashua NH

    After much trial and error trying to figure this issue out, I came up with the solution that solved my problem. The issue has to do with the designation of the buttons. Most of the buttons were on master pages. But some pages have a different look on some pages. So I turn on the master page to the page level button. Once this happened, he changed the name of the button. Because I'm using the function "Export to the book in PDF format", where this has been done in other ID files in the book, there was conflict in the naming of the buttons. Once I renamed the buttons with a unique name, they came on the page.

  • Im trying to fill out an application online which is a PDF file, but whenever there are similar areas (e.g., phone number, name, etc.) it automatically matches that I put earlier in the application. I wrote my number of phone, but then emergency contac

    h

    I see this a case of duplicate field names. For example, in a pdf form, you have 2 text fields. If the names of these two fields are same then it will duplicate the data as well. In this case, please go to the editing Mode form using Acrobat DC on your PC/Mac and give different names to the fields.

  • How to add a link to the html area to launch a dynamic action?

    Hey, guys:

    I need to add a link to a region of html hyper (I wish it could be a button :(), the value of the items in this region is loaded by a process of pl/sql before loading the header. And this link must trigger a dynamic action to update the database. I know how to add a link Super in this region, but how to define this link if I can launch a dynamic action by clicking on this link, could someone give me a hint?

    Thank you very much in advance.

    Sam

    Published by: lxiscas on April 11, 2013 17:04

    When I said updateRec I was just a name. Using the class alias_ncic will produce exactly the same result.
    Learn more about what you're trying to do, I wouldn't do that with DA at all. I would probably do the link send page and launch a process that call your PL/SQL. But if you must do a DA I'll try to explain a technique below.

    When you say

    Then, I pass two values of two hidden variables:

    P216_H_NCIC_APPROVE_TABLE_NAME---> "SOR_ALIAS".
    P216_H_NCIC_APPROVE_KEY_VALUE---> #ALIAS_ID #.

    Your link not pass anything because you never actually call the link, you have a DA of the substitution of the link action.

    So... try something like that. Use it for your link attributes:

    onclick="return false;" class="alias_ncic" title="NCIC Approve" id="#ALIAS_ID#" rel="SOR_ALIAS"
    

    This defines two attributes more to enter the values you need to.

    In yourself DA action on a.alias_ncic add two actions to "set the value.
    1.
    Action: Set
    Set Type: Javascript
    JavaScript expression: this.triggeringElement.getAttribute ("id")
    Assigned items: P216_H_NCIC_APPROVE_KEY_VALUE

    2.
    Action: Set
    Set Type: Javascript
    JavaScript expression: this.triggeringElement.getAttribute ("rel")
    Assigned items: P216_H_NCIC_APPROVE_TABLE_NAME

    Now you have your values defined.
    Make sure that in your PL/SQL Execute Code action you both of these elements in the field "Page to go" so that they values are actually passed.

    That should do it.
    Thank you
    -Jorge

    Published by: jrimblas on April 29, 2013 16:49

  • Maybe you are looking for

    • I need to clear the Cache?

      I stuck my last EtreCheck below. It reads very well, but tells me that 3.88 GB of Ram used is cached. That's all what I can improve and if so, how? In addition, he said that my backup of disks are too small, and yet they erase automatically the oldes

    • How programmate a waveform arbitrary in LabView for an AFG3102C?

      I am trying to send a LASER pulse which is controlled by the CH1 of my signal generator. This is typically a 1us pulse, followed by a variable period (of 300ns to 10us) and then another pulse LASER to 1us. I don't see how I could program in LabView w

    • Mozilla Firefox is not responding

      Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs I keep getting the message foxfire is not compatible with windows... This cannot be true.  My mozilla (foxfire) continues to plant for some re

    • Rendering OpenGL ANE. Possible?

      Hello I develop a Flex user interface application and need to display 3d graphics in some cases. If I understand correctly, this requires a native extension. I followed the steps in the tutorial (http://supportforums.blackberry.com/t5/Tablet-OS-SDK-f

    • How can I get my picture to transfer out of Photoshop and back to Lightroom?

      My photoshop for some reason any is no longer automatically sends my pictures back to lightroom.  I don't know how to solve this problem.