EN is not pulling Supporting detail

Similar Questions

• How a copy cell text, supporting details and attachments from a Version to another Member?

  How a copy cell text, supporting details and attachments from a Version to another Member?

  There was a Hyperion Planning 11.1.1.3 copied cell text utility, supporting details and attachments from one (job) Version to another Version (for example Final).  At the time where we ran, data erased!

  The old version (11.1.1.3's) Administration, management, copy data doesn't copy the text in the cell, supporting details and attachments from one Version to another Version. Latest version 11.1.2.4 copy these textual data?

  Thank you.

  
  

  Yes, in 11.1.2.4 data copy copy 'annotations to account', 'support detail' and 'text in the cell. Read below for what copy can do and can't do.

  http://docs.Oracle.com/CD/E57185_01/EPM.1112/planning_admin.PDF

  Copy of data

  You can copy plans of one dimensional intersection to another, including relational data and supporting details. For example, you can copy Final of Budget, FY10, FY11, forecast, first draft.

  Notes:

  l parameters to copy selected data are kept for the current session only.

  members of dimension l copied must be present in the selected plan types.

  the data must be copied in the cells that can accept data. For example, you can not copy data in read-only or dynamic of cells.

  l , you can copy annotations of account, to support in detail and text in cells. You can't copy annotations unit planning.

  l you cannot use this feature with attributes, selecting the attributes to copy.

  data l Essbase is copied regardless of selections for the copy of data Options.

  l because it is an administrative function, planning means that you have full access to the data you are copying. You cannot copy in the planning units that are approved.

  l this feature does not calculate data. To perform calculations, including the increase in the forecast of 5%, apply the business rule after you have copied the data.

  l to copy the data to succeed, you must select at least one Member for dimensions scenario, account, entity, period, and Version.

• Copy of supporting detail from Excel

  We are upgrading a Hyperion Planning 11.1.1.3 to 11.1.2.3 and have encountered a problem with the support of detailed.  When you try to copy more cells of data from Excel in the window of supporting details (web access), all the data is copied into a single cell.  In the previous version, the data would be copy across different cells as it existed in Excel.  The documentation has not changed, leading me to believe that this is a bug or miss me a setting somewhere.  Has anyone encountered this problem?

  Specifically, I am on version 11.1.2.3.500.17

  Any help is appreciated.

  As to apply it by you, it is actually a bug in code, see the reference bug # "" 17897098: RETAIL SUPPORT COPY/PASTE FROM EXCEL doesn't WORK IN WEB "»

  This set to be fixed in version 11.1.2.4.000 planning & later.

  HTH

  Nauzer-

• Support detail

  My understanding is to support details are stored in the database of planning and when a user enters numbers using the details, the total is calculated and recorded in the Essbase database. How can retail support in reports using Smartview, financial reports, OBIEE, etc..

  Here is the link to FR: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/ch05s12.html

  And SmartView: http://download.oracle.com/docs/cd/E12825_01/epm.111/sv_user_help/ch08s05s04.html

  I'm not sure of OBIEE.

  See you soon,.
  Mehmet

• Method Get JDev 10.1.3.3.0, not pulling on the second visit

  Hello
  
  I'm having a problem with the accessor get and setters of my grain of support not pulling on the second visit to the page. When I visit the page for the first time, it works very well and the calculations are complete but when I revisit the page it doesn't work. Any help would be great. I have setup a custom but phaselistener do not think that is the problem as I tried it on a test page with only field based on him and it works very well.
  
  Thank you.

  "Revisit" a page can mean many things. Are you you speak by using the back button on your browser, or by using the in-application links to access the page? In 10.1.3 ADF is not really compatible back-button navigation. I've seen full button back-support for 10.1.3 House, but it is not easy (basically, it's doing things fantasies with frames, makuing sure that back button always navigates actually a hidden frame and Javascript in this context which submits to having again the previous page request). It's one of these things "I hope 11g coming out soon.

  If you actually go back to the page by using the links on the page, it's a little more surpsising. It is certainly the getter which is not put to fire, and not, say, code in the constructor of the Get accessor is dependent on? If the latter, make sure your scope of bean; It must be set to 'request', or you will be reusing an old bean rather than make a new. Otherwise, I'm at a bit of a loss.

• Transmitter does not yet support this card? Apple pays

  I received a message after trying to add my card to pay Apple and once I pushed next to add a message came and said

  'your transmitter does not offer support for this card' has anyone else had this problem? Or went to their bank? I went to my Bank and talked to my banker, and she told me that they were on a waiting list to get on Apple pay! Could this be why it does not work? It then I hate my Bank so badly! I can not even use my card on itunes

  Sweet Babygirl 1991 wrote:

  .. I went to my Bank and talked to my banker, and she told me that they were on a waiting list to get on Apple pay! Would it why it does not work...?

  Yes - which explains why you currently cannot add the map.

• Viewer Keynote iCloud "not fully supported" in Firefox

  Version 28.0

  Go to: https://www.icloud.com/iw/#keynote/BAIZL5kxt6QNAiJ71AOB1fsZlhQ_3JFjOSaF/hashtables

  Actual results
  "Your browser is not fully supported.
  Unable to show slides
  Expected results

  According to the directives of Chrome and Safari

  Hi Gids and Moses,

  I visited the site and click on ok for the notification you saw two. Then he took me to a page to sign up. I clicked away and refreshed the page and the presentation loaded.

  Clear the cache and try to reload the page. The presentation appears?

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

  Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

  I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

  I also tried to use the Sony system recovery CD, but it does not work.

  Help!

  Hi IAMSOBZ,

  As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

  Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

  a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

   

  Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

  b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

  c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

  d. read the Microsoft software license agreement and press F8.

  e. Setup will scan for previous Windows installations

  f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

  g. complete the installation

  You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DB is not a supported resource file

  source: "asset:///sql/mileage.db"
  

  The above line is to launch warning: 'assett:///sql/mileage.db' is not a supported resource file.  I can provide more if necessary code.  I'm new to the development of stunts and for now just working on a proof of concept app for myself.  Thanks in advance!

  In addition, do not know if this is important or not, but it is within a tabbed pane.  Do I need a list in the tabs pane?

  Please go through this link if you want to deal with the database in your application...

  https://developer.BlackBerry.com/Cascades/documentation/UI/lists/lists_create_database_class.html

• Added system ok but as far as I know, powerUp listener not pulling

  Hey. My application, in main(), adds a listening on starting system to cold (battery replaced), without error. However, the powerUp method below does not pull when I switch off my BB and sur-Appuyez the red end button for 5 sec and press once again (a warm start). How do you get powerUp to call? Code is below.

  MSL MySystemListener = new MySystemListener();
  MonthlySpend ms = new MonthlySpend();
  ms.addSystemListener (msl);

  private static class MySystemListener implements SystemListener
  {
  public void batteryStatusChange(int a) {}
  public void batteryGood() {}
  public void batteryLow() {}
  public void powerOff() {}
         
  public void powerUp() {}

  PerformAnyReset... schedule, calls so if not reset, don't program twice
  If (!.) PerformAnyResetWhichWasScheduledWhilePhoneWasSwitchedOff())
  ScheduleTotalResetForStartDateOfNextBillingCycle();
                                 
  SetIconAndTitle();
  ScheduleIconUpdateOvernight();
          
          
  String logMessage = "Warm" started
  If (EventLogger.logEvent (0x4c9d3452d87922f2L, logMessage.getBytes (), EventLogger.ALWAYS_LOG)) {}
  System.out.println ("Log successful!");
  }

  Hey - fixed. The application itself must be a SystemListener, not another class

  J

• Why my windows 7 64 bit is not in support of my USB connected brodband modam UTSTAR UT300R2U, if you have drivers please send the link

  Why my windows 7 64 bit is not in support of my USB connected brodband modam UTSTAR UT300R2U, if you have drivers please send the link

  Help, please

  If there is no driver, your ISP will have them, NOT Microsoft. Contact your ISP...

  OR...

  You have not need drivers, if you are using the RJ45 connection. Unplug the USB cable and attach a RJ45 patch canble between the modem and your computer.

  The computer must connect after doing this

• When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  When I try to open my Adobe Pro downloaded on my Mac, I get an error message saying "Cannot open the application"Acrobat_2015_Web_WWMUI.exe"because the Microsoft Windows applications are not considered supported on OS X."

  You must download and install the version of Acrobat Mac.

• Help! do not update the details of credit card!

  Good afternoon! I can't change the credit card number? Server error problem! Help me please!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html