ENA 5071C with installed application of LV

Similar Questions

• Problems with installing applications

  Hello, I posted this on PreCentral.net yesterday and thought I should post it here as well:

  "Everyone see that? I've updated to 1.0.3. Since then, I've seen 2 updates, one for Fandango and a speed brain. I tried to update and I got the error "Sorry, Not Enough Memory message
  Please remove an application that you have installed to make room. »
  I thought that no problem, there are 2 available for SpeedBrain updates, I've seen the same thing earlier to mCraig, so I deleted Fandango, SpeedBrain and mCraig, thinking that I would just reinstall apps. Same error message. I've got 5.7 GB of free according to the info on the device. The Pre is rooted and my other apps seem to work (except classical). »

  I don't know if it is related to 1.0.3 or not. I know that someone answered they had exactly the same problem and they had not rooted their pre. I think it should be connected as a problem at the moment. I go to the Sprint Store tomorrow so that they can check it out. I will let you know the results.

  spisatus wrote:

  sumanb, I had the same problem. I had still 7.2 GB free so it seemed weird. I tried everything I could think of, and the only thing that worked was a reset of all. I was wondering if something got stuck when installing 1.0.3. Fortunately, I didn't have much that I could not recover quickly with "Senergy".

  So, I tried to do a full erase before, but it wouldn't take, only made a partial erasure, the device and remotely. I called Sprint today and they had me enter the MSL and do a reset. Which unfortunately, made things even worse. He did not have a full erase, but he did clear my phone number, so at this time, I thought I was mature, nothing tried the Sprint rep seemed to work. She recommended that I go back to the Sprint Store I bought. Because I'm not in the area at the time, that would have meant waiting for something like 8 hours before I got a working phone , so I decided to see if there is another fix. Voila, Palm WebOS Dr. to the rescue. It replaced the flash drive with an image of WebOS 1.0.2 factory default. I was able to connect and it restored most of the learned things of the backup and the synergy program. I've updated WebOS 1.0.3 and then update applications without problem! Now, I'll just copy the content of the USB back when I get home and I'm all set

• How to change the drive letter with installed applications?

  My window is installed on the C: drive, and the application is installed on the D: drive,

  I just buy a new HARD drive and put it into drive E:, everything is copied from drive D: to E: drive and want to switch between the letter D: and E:.

  I tried to put in DISKPART, but when I restart my XP, the drive letter remains the same,

  If I change the drive letter directly in XP, it cannot be changed, because the applications are running.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Make sure any DVD/CD or USB keys are not connected or set F assignments or beyond (MY DVD is S & T).

  Shut down the computer; power off. Disconnect the old drive (now D). Connect the new drive (now a copy of the old D). Power and boot to the desktop. Go into disk management and make sure the drive that contains Windows, the original C drive is always c. assign the new drive as D. Reboot the desktop. Check operation.

  Shut down the computer; power off. Plug the old drive. Restart the desktop computer. Enter Disk Management and assign it to E.

  Restart, then check the operation.

  Tom Ferguson

• laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 up endlessly with the error.  How can I get these applications on laptop

  laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 provided with my imac up endlessly with the error.

  How can I get these apps on the laptop

  What applications and what is the error message?

• When you try to install my new Embird program I get the message "this link must be opened with an application, select application. What does that mean?

  Help, I hope that I've not messed up, too bad!

  Help, I have a small embroidery business and have used a program called Embird.  Yesterday, I downloaded an upgrade for this program. It said to uninstall the old program before installing the new, so I did.  Now when I try to install the new one it says this link must be opened with an application, select application.  I have no idea what it means that someone can help me?  I tried to restore the computer to a date prior to just start all over hoping he would restore the old Embird, it says that the file may be damaged and will not work.

  If you were able to 'merge', you have unzipped the file somehow.  What was all the messages when you did the merger?

  Follow these steps:

  1 information about the particular file in question

  Right-click on the downloaded file, and select Properties.  What does say for 'File Type' and what is the 3-letter file extension (after the point)?

  If there is no file extension, find the file using Windows Explorer, and then click Tools > Folder Options > view.  Uncheck "Hide extensions for known file types" and click OK.  Now, look at the file again for the file extension.

  2. test of exe files

  Click Start > run, then type notepad in the "open" box, then click OK
  Didn't open a Notepad window?  If not, what error message do you have?

  Click Start > run, and then type the following in the "Open" box and click OK
  %SystemRoot%\system32\
  Find notepad.exe (or just Notepad if file extensions are not displayed), and then double-click it.  What is going on?

• My watch Smart 2 will not install applications that even he is paired with my Android phone

  Previously, I use Sony SW2 with Samsung Note 2, there is no problem.

  But when I change my phone to Mi3 romaric, first the phone does not recognize SW2.

  After a few days, the phone could find SW2 and coupled with the magically (probably through updated material?)

  But I can not install applications on the SW2, except the Runtastic app (I can change the face of wallpaper and shows the phone from my phone without problem. »

  I think it might be due to an INCOMPATIBILITY between SW2 and Mi3, which could be due to the configuration of each party or the update.

  I can do on the side of SW2? Help, please!

  Unfortunately if it is due to consistent problem, we cannot do something. At least whether furture update that the proponent of the product make it compatible with the two device works correctly.

  Manage to find that some post relate to this hope, to help to solve your problem.

  http://en.MIUI.com/thread-16822-1-1.html

  http://xiaomi.EU/community/threads/Sony-SmartWatch-2-compatibility-with-MIUI-from-the-introduction-o...

• Cannot install applications he said missing files or if it install it comes up with open with dialog

  I tried to install the software after the installation of the operating system on my new internal hard drive. But whenever I have to install something it says some missing files and even if it installs I could not open the application. It popups opened with the dialog box.

  Hello sandrine,.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. After you have installed Windows on your PC, you are able to install Windows updates?
  2. Have any security software installed?
  3. What is the exact error code/message you get when installing applications?
  4. Are you logged in with an administrator account or a standard account?

  Try these steps and see if it helps you to solve the problem.

  Method 1

  First of all, try to run the fixit/convenience store described in the article mentioned below. This fixit is used to fix the below mentioned corruption.

  • Registry keys damaged on 64-bit operating systems
  • Corrupt registry keys that control the update data
  • Problems that prevent the installation of new programs
  • Problems that prevent existing programs are completely uninstalled or updated
  • Problems you block of uninstalling a program through Add or remove programs (or programs and features) in Control Panel.

  Solve problems that block the programs to be installed or removed

  Method 2

  There could be a chance that the service responsible for the installation of application does not run. So, I suggest you to check if the installation service is running and its status is automatic.

  • Press the Windows key + R to open Run box.
  • Type services.msc in the Run box and press on enter.
  • Look for the Windows service install.
  • Right-click on the service and select Properties from the list.
  • Start the service if it is not executed.
  • Make sure that the Startup type should be Automatic.

  Get back to us with all the necessary information and the result of the proposed suggestion. We will be happy to help you further.

  Kind regards

• Adobe Creative Cloud bought 28 may 2015. Now how to download all Adobe products? with this purchase do use all adobe products? How to install applications on my desktop?

  Hello

  I bought Adobe Creative Cloud on May 28, 2015. Now how to download all Adobe products? with this purchase do use all adobe products? How to install applications on my deskyop?

  If your subscription is current, the indications are less than

  Your subscription to cloud or serial number to show on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Creation add-on cloud libraries could not be installed because incompatible with installed adobe applications

  I updated and downloaded AI CC 2015, InDesign CC 2015 and PSD CC 2015 and receive error message through the cloud of Creative Creative Cloud libraries could not be installed because not compatible with adobe applications. Confused since all apps are up to date and must have installed automatically. No idea how I can fix?

  Hello

  Please refer to the instructions in the links below, this should help solve the problem:

  Failure of the installation of the add-on CC libraries

  Creative cloud cannot install add-on libraries... (now what?)

  Creative cloud libraries does not not in photoshop

  Error: "unable to install". Creative cloud office

  Let us know if that helps.

  Kind regards

  Bani

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Can .air install some files with the application?

  I have an installer.air created by Adobe Flash. I have another file called settings.cfg that is necessary for my application from running. How to let the computer auto install settings.cfg in installation as well as the application directory when I run installer.air? Currently, I need to manually place the settings.cfg in the directory of the installed application.

  Click your appliction settings/general edit button and add the included files.

• How one manually associate the file with an application types?

  I recently installed the Adobe Digital Editions software to download an e-book I bought. It will not open in ADE, and the manual of the ADE advises me to "manually associate the" types with the application of the EPUB files and the subsidies agreement. 'See the instructions for your operating system for associating file types'. I can't find the instructions for it anywhere. HELP, please.

  Support cat either does not!

  Click context (right click) on the file and the menu should give you one option 'Open with' - at the end of which is 'Other' - which should allow you to engage in the type of file you want

• OS6.6.0 RC2 cannot install applications

  I come to RC1 that works well.

  With RC2 I can't update the list of the app so can not install applications.

  The apps I use are PHPsysinfo and netdata mt.

  the official firmware os 6.6.0 solved my problems.

• Installed application behaves differently by the path of the file

  Hi all! I have a problem regarding my application installed on another pc from "My Installer", that I have built my original labview project.

  I wanted to set up a file open/create operation, get the path of the current file of my vi, create the new folder 'report' and the new report file, whose name is composed of the date and time when it is created. With 'Get string date/time', I got the date as '25/05/2015' string and time string like '14:24:20 ', and 'find and replace the string' I have them is converted into '25052015' and "142420" everything simply by replacing "/"and":" with nothing.

  It works fine with the original vi in my pc, but with the application installed on another pc, I got error in the path, that instead of 'C:\...\report\transducer_25052015_142420.txt', I got "C:\...\report\transducer_25052015_14.24.20.txt"!  The colomns are replaced by dots!

  I have no idea why my installed application would give such error. Someone has an idea?

  PS. I tested on the difference between 'Run application path of time' and the file path by default, you can see on the image below.

  

  You can provide a format if you use the Format Date/time string.  You don't need to replace the then you do not have to worry about getting to be in the way in which the system settings.

  

• During the installation of Windows XP, he became hooked on "install applications" for 5 hours?

  After you have reinstalled XP with the original CD, I'm hung up "installation applicatlons".

  Successfully completed the reinstallation of Windows XP.

  Hang up on "install applications" took place at the end of the resettlement process, so I simply turned off the power, restarted, and now clean my WHAT nice, XP works fine.