End of 2011 Macbook with Windows 10 - adjustable brightness with the video card main?

Similar Questions

• Problem with the video card Inspiron 7520

  Hi all

  
  Since I installed the 8.1 update windows I have problems with the video card. PC 2 video cards are installed:

  (1) AMD Radeon HD M 7730
  (2) Intel(r) HD Graphics 4000

  The main problem is that the resolution of the screen is fuzzy. I downloaded from Dell, the updates for both cards and tried to install, but it does not change Sub. My question is: is there a special procedure to install a driver?

  Thanks to you all!

  HELPPPPPPP!

• Problem with the video card and satellite L650 - 1 M 6

  Good evening!
  I have the new Satellite L650 - 1 M 6 with no operating system. When I did a fresh install of Windows 7 32 bit, I had several device problems. Most of them that I managed solve my self (as wlan drivers) but now I need your professional help.
  At this moment, I had left this problem of devices (on the information system):

  Not available ACPI\TOS6205\4 & 4A257CF & 0 the drivers for this device are not installed.

  I think it might be the video card (must be ATI HD5470) but SysInfo says:

  Type available, compatible adapter (Standard display types)
  Description Standard VGA Graphics Adapter adapt

  Would appreciate any help on this.
  Thank you in advance.

  Hello

  As I see you as laptop without OS and you try to install and configure your own operating system.
  In many posts, I wrote here that I write again and again that the most important thing is to install all the drives and Toshiba specific stuff according to the order of installation right then, here's the order of installation for your laptop model:

  Win7
  TOSHIBA Assist 3.00.10_O
  TOSHIBA Extended tiles for Mobility Center Windows V1.01
  Synaptics Touch Pad Driver 15.0.8.1
  Realtek 6.1.7600.30111 card reader
  V2.0.0.6 TOSHIBA HW Setup Utility
  V2.0.0.3 TOSHIBA supervisor password utility
  TOSHIBA Web Camera Application V1.1.1.15
  TOSHIBA HDD_SSD 3.1.64.6 attention
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.0.30.1203
  Display driver
  Driver Intel Turbo Boost Technology 1.1.1.1007
  Driver Intel Rapid Storage Technology 9.5.7.1002
  Conexant Audio Driver 4.119.0.61
  TOSHIBA value added package 1.3.3_64
  LAN driver
  TOSHIBA Software Modem 2.2.97 (SM2297ALS05)
  Driver for Conexant Modem 7.80.4.50
  Battery Bluetooth for Windows by Toshiba v7.10.10 (T)
  Wireless LAN driver
  ConfigFree 8.0.29

  I recommend reinstall you Win7 and continue with all the other stuff flowing this install order and I hope everything will be OK.

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Please help me with the video card and power supply issues!

  Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

  Oh and in case you want some specs on my system here are a few

  Windows Vista Home premium service pack1
  HP Pavilion a6620f
  Processor: pentium dual core cpu e5200 @ 2.50 GHZ
  memory: 4.00 GB
  system type: 64-bit operating system
  Version of DirectX 10
  graphics card: intel GMA 3100 Total memory 256 MB

  Message edited by chefinomaha on 06/03/2009 16:38

  Hi chefinomaha,

  Sorry to hear about your frustration. Here's some good news.

  I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

  The important thing is to get the right kind of diet that fits your connectors.

  Here's your motherboard page.

  Here is a document with step-by-step instructions and video for adding a video card.

  Here is a document with the video to replace the power supply.

• Satellite 5100/201: problem with the video card or overheating?

  HY,

  I have problems with video on a 5100/201 Satellite. It seems that when I press the left side above the graphics card or press a key on the keyboard on this side, the screen begins to be scrambled and vertical lines appear. To end Windows XP resets giving a critical error on the device and the video goes to 640 x 480. Same thing happens when you run Linux Suse 9.0.

  My question is what is the cause: map graphic damaged or overheating due to the fan not as effective as originally (my laptop is nearly two years old. Do you have someone be able to find the cause and solved the problem, also with the assistance of Toshiba?
  Any help welcome.

  Hello

  I think the problem on your laptop depends on the fan.

  A colleague on mine has a 5100-603 and had similar problems.

  The Station changed the fan.

  Good bye

• Problems with the video card.

  I need your help with the following problems. I just installed the card ati radeon hd 5670 (and drivers) on the hp pavillion p6516f. When I checked the settings on adobe photoshop cs5 (section 3d) gray. But I installed the graphics card driver. Please someone help!

  It looks like an earlier version.

  You can go here and download the version 11.2, just

  Once you get to the download page for your operation

  system, go down and choose drivers, then choose version 11.2.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

  MTSTUNER

• Sucks TC-705-EB53 with the video card double slot

  Salvation; I bought a GTX950 card (and I replaced the power supply with a power so this isn't a problem), but I found that this Board/case seem to have a weird hole in the back design - specifically, instead of having a bumpy thing (I don't know what it's actually called), he seems to have a small bunch outside , and it doesn't look like my card can fit in there. Is it possible to install this card two slot or do I have to return it and get a unique one niche?

  

  

• Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x 64 on video card

  Good evening

  I just finished installing Windows 8 x 64 Win7 Pro, I could find all the drivers for my laptop, but I have problems with the video card settings.

  My laptop is a HP Pavilion dv7-6c90el with two graphics cards, one managed by the processor, because it seems to do, and the other is normally installed on the PC.

  The cards are read by Windows as:

  Unit 1: Intel HD Graphics 3000
  Unit 2: AMD Radeon HD 6700 m Series (Microsoft Corporation - WDDM v1.20)

  the problem lies in the fact that the device must be a supported per second, or disabled, as it will not be. AMD video card must be set to 1 and the intel 2. If I go to the "Device Manager" to disable the card intel Windows, it works as if he was absent any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can't find the card. It's as if the windows are imposed only use the unit 1, which, however, I can not disable the BIOS, because there is no voice. I note that Windows 7 had no problem.

  I ask you to help me because I need the video card for my work performance.

  Fixed the link - please try again

• End of 2011 MacBook Pro update

  Can I use memory Module Apple 8 GB 1600 MHz DDR3 (PC3-12800) - 2 x 4 GB to upgrade my end 2011 MacBook Pro (4 GB / 1333 Mhz)?  The representative said it's for 2012, but I read here that some have used it without problems on years later.

  Mac can be very picky with ram, unlike Windows machines. For that it works better with no trouble now or later, be sure to buy ram designed for Macs. Match sticks and speeds. Some Mac does not start if a faster ram is used. Go with 2 x 4 GB 1333 mhm, same SODIMM, made for Apple products.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• problems with the graphics card after installing windows 7, code 43

  I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

  ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

  published in ' 07 and apparently is not compatible with Win7.

  Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

  It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

  not be supported as long as a dedicated graphics card.

  In this case support drivers apparently stopped with Vista.

  If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

  What about drivers who are up to date.

  These two methods are a little known does not install the proper drivers for the graphics.

  I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

  You can download the drivers for XPRESS 200 SERIES from the AMD website below-

  http://support.AMD.com/en-us/download

  .

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• Tab automatically when you reach the end of a field with the number of limited characters

  Hello!

  Is it possible to activate an automatic tab behavior when the user reaches the end of a field with the number of limited characters?

  I'd like the cursor to move to the next field in tab order automatically.

  Possible?

  Thanks for the tips!

  Marcos

  Hello

  What happens if you tried something like the following example? This works using formCalc on the change event for the user's domain is currently typing in:

  fullCount var = 3
  var currentString = xfa.event.newText
  If (Len (currentString) > = fullCount) then
  xfa.host.setFocus ("TextField2")
  endif

  Or, if you prefer javaScript:

  fullCount var = 3;
  var currentString = xfa.event.newText;
  If (currentString.length > = fullCount) {}
  xfa.host.setFocus ("TextField2");
  }

  These work very well.

  I hope this helps!

  Stephen