ENE CIR Receiver Driver

Similar Questions

• Pavilion dv6-2113tx: driver3x and ene cir receiver base system device driver missing for 2113tx dv6 on w7 ultimate

  Hi, I could not connect my pavilion dv6 2113tx Samsung tv using ch I have cable. When I ran the diagnostics I found this driver base system were missing for 3 and an ene cir receiver driver is missing too. The device base system Id are as shown below

  PCI bus4 device0function4

  PCI bus4 device0function3

  PCI bus4 device0function1

  ENE CIR receiver - intel (R) controller interface LPC PM55 express chipset

  could someone please help with these drivers where I can find them and also I did not detect second monitor when I tried to adjust the resolution of the screen

  Hello:

  You need these drivers...

  Basic system:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp45010.exe

  ENE:

  This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

  File name: sp44983.exe

  If you cannot detect an external monitor, you probably also need to install the graphics driver.

  This package provides the driver for the NVIDIA GeForce GT 230 M video chip or 320 M in the notebook models and operating systems.

  File name: sp54929.exe

• Driver for ENE CIR Receiver for HP Pavilion dv6 2040 el 64bits VT 949EA #ABZ OS: Windows 8 Pro

  Install the new device ENE Cir Receiver driver in Windows 8 Pro

  Hello:

  If you have already tried to install the driver W7 and it did not work, I try to install manually and see if it works.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79533-2&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0006

  Download and run the file above. Conclusion of any windows error.

  Go to Device Manager, then click on the receiver cir needing drivers. Click on the driver tab, click on set to update driver.

  Select the 'Browse my computer for software' and navigate to the installation folder that was created when you ran the file.  Who will be in C:\SWSetup\sp44983. Make sure that the include subfolders is selected and I hope that the driver will be installed.

• Conflict of ENE CIR Receiver in Windows 7

  I have a dv5-1138nr orginially came with Vista 64 bit. I recently installed Windows 7 prof 64 bit.

  I'm having a problem with the HP Media remote that I have. It does not work, none of the buttons on the remote work.

  I installed Win 7 64, ENE CIR receiver drivers so Vista 64 and have had no luck. I get a conflict between 2 resources: ENE CIR receiver @ 0380-0383/o range and map parent resources of e/s @ range of 0380-0387. The automatic settings are grayed out.

  I want to make it work again, I find it very useful for watching movies.

  Any help would be appreciated.

  Thank you.

  I had the same problem.

  To solve it, I downloaded the following file:

  http://www.x-drivers.com/catalog/drivers/CIR/companies/ene_technology/models/cir_receiver/13367.html

  Worked very well.

  Hope you helps out.

  Arron Gilbraith

• Receiver ene cir driver conflict

  Original title: ene cir receiver

  I have,

  I have hp Pavilion dv6 notebook pc 2138ca and I've upgraded to windows 7 ultimate 64 bit sp1. After an upgrade, I have a message to the center of the action as install your infrared receiver, a driver for your infrared receiver is available online.

  When I try to download and install from the site intel, it says cannot complete the driver installation wizard.  errors were encountered while installind the driver software for your devices, check the status column for details

  name: broadcom (bcm 43xx) net (22/03/2010 5.60.350.6)

  status: installation failed

  I installed the ene cir hp driver is ene verion 2.7.4.0 07/07/2009

  device type: human interface devices

  Manufacturer: ene

  Location: on (r) intel hm55 express chipset lpc interface controller b 3, 09

  The conflicting devices list:

  range of input/output 0380-038F used by:

  motherboard resources

  Hardware ID are as follows:

  ACPI\ENE0100

  * ENE0100

  Please tell me what can I do?

  Thanks in advance

  Hi Ali,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps in the article and check if it helps. You can also run the tool and troubleshooting hardware devices and check if it helps.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Como activo el ENE CIR device

  Como activo el ENE CIR device

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite Pro P100-347: SMSC CIR HID Driver

  I upgraded to Vista and updated all the drivers of the new dvd provided by Toshiba.
  I get the following message appears on the screen: ' SMSC Toshiba remote control Media Launch Application requires the HID of SMSC CIR driver. Now terminate '
  Can someone advise/help me this message and which driver I have load.
  Thank you

  REDA

  Hello

  It seems that you need the driver for USB-infrared on your remote control.
  Correctly installed all THE drivers? If not then check again and beware of these infrared drivers.
  Google is your friend, type in google and you will find some interesting things: "pilot SMSC CIR HID."

  Greetings

• DV9417ca infrared receiver driver for Windows 7

  I was wondering if there is a driver that works with Windows 7.

  I tried sp44983.exe, sp44994.exe, and sp45214.exe, none of them does not seem to work.

  Thank you

  Thank you guys.  After a series of quarrels, I found that Win 7 supports the default receiver.  The problem turned out to be a low battery on the remote control.  The reason that he has escaped me, it's that I actually tested it under infrared on a camcorder, and I was convinced that the remote didn't work.  But apparently, the signal was not strong enough for the receiver.  A new battery and it worked like a charm.

  Guys Merry Christmas!

• Problem with eHome Infrared Receiver Driver

  I have an IR receiver USB that I got from Dell which came with my old computer (XPS 210, I had to have my computer replaced if... the motherboard was fried on this subject). When I plug in the usual Windows searches for a driver and install. The driver for this is "eHome Infrared Receiver (USBCIR)" as it is listed in the device under USB devices Manager. After installation there is a green light on the receiver and everything works great, works by remote control (supplied with the receiver) very well as well.

  However, whenever I restart my computer, Windows detects the device again only as an unknown device. The receiver doesn't have a light on this subject, so it does not work. So that this work once again, I have to unplug and plug it in again.

  I tried to uninstall the device in Device Manager and install the driver again, but this does not solve the problem. I also tried different locations USB... does not help. I do not use hubs USB, just the slots on the tower. All my other USB devices work fine.

  I already searched the internet to find that apparently no one knows this problem. The receiver worked fine with my old computer, nothing was wrong. My old comptuer ran Windows Vista Ultimate 32-bit (x 86) but this one runs the same only 64-bit, could be the problem.

  OS: Windows Vista Ultimate (x 64-Bit)

  Any help is appreciated.

  Hi guys,.

  Did you guys check with Dell to see if they provide a 64-bit driver for the remote update? or with Phillips?  The firmware may need to be updated too if possible.

  Let us know if you need more assistance, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dv4-1430us: lack driver / / / question to support Assistant

  Hello, I just clean installed W7, I found a missing driver and I found the hardware ID

  ACPI\ENE0100

  * ENE0100

  Another question, I installed the new HP support assistant and he is supposed to find missing and outdated drivers? I know that some are outdated, but I don't know how. Neither windows update or HP support will find everything.

  DV4 1430US

  Hello

  Install:

  ENE CIR Receiver Driver

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45214.exe

• HP dv6-2150us-driver missing

  I use windows pro 8.1 on this old laptop. Recently, I checked the Device Manager and found 2 lack of drivers, that I tried use booster driver to install the missing drivers, but I did not. Here are the pictures:

  

  

  Please see try HP 3D Driveguard software (HP ProtectSmart hard drive Protection) and ENE CIR Receiver Driver. For the ENE CIR Receiver driver, you might have to run the file. Conclusion of any windows error. Go to Device Manager, then click on the device ACPI\VEN_ENE & DEV_0100. Click on the driver tab, click on set to update driver. Select the 'Browse my computer for software' and navigate to the installation folder that was created when you ran the file.  Who will be in C:\SWSetup\sp44983. Make sure that the include subfolders is selected and you should be good to go.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion DV - 5 1055eo: driver acpi ene0100

  I have an unknown device in Device Manager

  Hardware ID

  ACPI ENE0100

  Cannot see to be able to automatically update and HP support and so on can not find the missing driver.

  Could you please post me a link to the correct driver?

  Thank you

  Hello:

  You need the driver for this device...

  ENE CIR Receiver Driver

  File name: sp41591.exe

• HDX - 18 a CTO-1200: validity sensors need driver for HDX-18 64-bit Windows 7 USB\VID_138A &amp; PID_0001 &amp; REV_0372

  I looked everywhere for this driver.  The validity of the sensor connection is:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=ob-65053-1

  that leads to nowhere part on this site.

  This is to set the 'unknown device', marked by W7 Device Manager.  The hardware ID is:

  REV_0372 & USB\VID_138A & PID_0001

  USB\VID_138A & PID_0001

  I don't want to pay a seller "Find-every-driver-in-the-universe" an absurd $$ for their application, when it used to be free from HP.

  Thanks to anyone who can give me a lead.  I really appreciate it!

  Joe

  (PS)  I have another "unknown device" with only the following HW ID:

  ACPI\ENE0100

  * ENE0100

  Hi, Joe:

  See if they work...

  This package contains the driver for the validity fingerprint sensor in portable models supported and operating systems.

  File name: sp45050.exe

  This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

  File name: sp45045.exe

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• driver HP pavillion dv6 2138 portable ca problem

  Hello

  I have a hp laptop pavilion dv6 2138ca, I've upgraded to windows 7 Enterprise, the problem is that I can't have a driver for the unknown device.  its location is: Intel HM55 Express Chipset LPC Interface Controller - B 3, 09

  I tried all the drivers provided by hp, but its not resolved. can someone help me on this please. Thanks in advance

  I now hardware ID:

  ACPI\ENE0100

  * ENE0100

  Hello

  First of all, make sure that you have installed the Chipset driver from the link below.

  Driver Chipset.

  If you need to install the above, restart the laptop.

  When windows has reloaded, try installing the ENE CIR Receiver driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44983.exe

  Kind regards

  DP - K