Dv4-1430us: lack driver / / / question to support Assistant

Similar Questions

• Dv4-1430us: lack of Base system device drivers

  I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.

  If the download page of is the mystery pilots BSD here? Windows Update can't find them.

  DV4 1430US

  Hello:

  You need this driver for the card reader (Base system Dev):

  This package contains the driver for the JMB38X Host Controller Card Reader to
  models of portable supported and operating systems. JMB38X card
  Reader supports the following types of media: SD, MS, MMC and xD.

  FTP://FTP.HP.com/pub/SoftPaq/sp45001-45500/sp45180 .exe

• Pavilion dv7 cannot recognize the CD/DVD drive, no help support "assistant".

  Subject says it all.  Since I got this machine, it had problems when the CD/DVD drive becomes invisible and are not accessible by any means.  A reboot has solved in the past, but now, it doesn't seem to work more.  I would like to reinstall the drivers, but guess what, I don't know what kind of player, it is (funny how that works), and Support 'Assistant' is apparently ihcapable to understand the model of this Pavilion dv7 ("product name: loading...") ("now until the heat death of the universe), which does not help either.  Anyone has a better idea than just blindly install the drivers?

  Hello

  Drivers for CD/DVD drives comes with Windows (IE with the operating system - it is not the drivers you need to download).  The driver is located in C:\Windows\system32\DRIVERS\cdrom.sys.

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive does not, in the Start Menu, open Control Panel and click Device Manager.  Click to open the IDE ATA/ATAPI controllers.  Right-click on the first channel and select uninstall.  Do not delete if requested drivers.  When uninstalled repeat the process for each channel.  Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives.  Make a right click the drive (if it shows!) and choose uninstall.  Do not delete if requested drivers.

  Restart the computer and let Windows reinstall devices.  Check the disc again.

  If it still does not work, re-run the fixit automated Microsoft at the link below.

  Windows 7

  Vista

  Then, in the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Best wishes

  DP - K

• Control of hard disk HP Support Assistant Diagnostics

  I have 2 brand new HP Probook 4540 s (8 GB of RAM), Windows 7 Professional 64-bit, SP1, F.41 BIOS, all patched to the latest Microsoft Windows 7 patches from Windows Update.

  I have HP Support Assistant 7.0.39.15 and re-installed HP Software Framework 4.6.13.1.

  After that, I noticed that a new feature - HP Hard Disc Check, seemed to support assistant Jason:

  Support assistant > my computer > Diagnostics

  (there were only 2: check the network HP and HP Battery Check).

  A few days later, he (HP hard drive Check) just disappeared in itself of HP Support Assistant.  Help, please!

  The following link will give you detailed information on the removal of hard drive to HP Support Assistant diagnostic:

  HP computers - hard drive removed check for HP Support Assistant (HPSA)

• Support assistant thinks I'm a guest, not an admin

  Hello

  I had a mooch here and that you have spotted an answer for that - well if there is an answer, please feel free to point me in the right direction!

  Under Windows 7 Ultimate on my DV7-2045ea.

  Kept getting messages Windows form a necessary question for support Assistant, so I downloaded and installed the latest version.

  On the first run, it tells me that I'm running as a guest account and must be an administrator.

  My account is the only game on the laptop and (depending on user setting) is an administrator account.

  Suggestions to help solve? An image of the error is attached.

  See you soon!

  

  Hello

  Thanks for the tips.

  First of all, I did a clean to Win7U installation. The laptop comes with Vista and a load of other gubbins that I find always a pain to deal with, so I started completely from scratch (I realize that this also removed any substance of HP integrated support too!).

  I went through the steps you listed.

  HPSA works well on the Admin acocunt.

  I am registered as an administrator and I'm in every possible user group on the laptop (already was - I didn't need to add me at all)- and that is the rub.

  I also lived with Windows update problems so studied the error code that I have arrived.

  It turns out be a member of each group of users is a bad thing. (I would like to know who thought is was a good idea to my user account in order to join them all by default!)

  So, I've now removed myself from all groups except administrators and individuals (mirroring the Admin account) and everything works fine again - HPSA load properly and Windows Update done his work properly again.

  Bravo again!

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• Omen J2W10AV #ABA: driver Nvidia laptop HP Omen - HP Support Assistant or Nvidia Geforce experience?

  Is there a difference between the graphic drivers downloaded through Nvidia GeForce experience or HP Support Assistant? Their version numbers do not match. I currently use GeForce experience to keep my graphics driver updated, but I also have a problem with how strong the fan may be when you play. I didn't know how hard it gets. If the driver supplied by HP is better suited for this laptop?

  Appreciate any help.

  @Kimikaze ,

  Hello and thanks for the display on the HP support forums.  When going with drivers for all laptops always stick with links and tools from manufacturers.  The reason is that pilots have been designed for this application.  They can use a similar number as a GT750 however chip the chip built for laptop him more often were modified slightly to adapt to demand.

  Link at the bottom, so only use the drivers from HP and tools for your HP laptop.  Direct drivers from the chipset manufacturer may not be the same and ask questions for you.

  Thanks again for posting and have a great day.

• HP Pavilion Notebook PC g6: HP Support Assistant Windows 10 questions

  Op system was previously bfr Windows 7 update to Windows 10 in Dec2015. Since then, have never been able to open HP Support Assistant. Am constantly pop-up "HPSF.exe has stopped working. The app has encountered a serious problem and needs to close. »

  I tried to uninstall HP Support Assistant, and I also tried to install latest HP Support Assistant without uninstalling the existing HPSA and the RRs, the following error message "the component you are trying to use is on a resource not available network. Click OK to try again or enter a different path to the folder containing installation pkg "HP Support Assistant.msi" in the box below. I found two files in my C: drive containing this file, but RRs andother error 'the path "C:\ProgramData\{18165758-115C-4DC0-9EC2-FF89F725767F}\HP Support Assistant.msi" was not found. ((Or I get another error that says that the file is not a valid installation for the product package)) Make sure you have access to this location and try again, or try to find the installation package "HP Support Assistant.msi" in a folder that can install the HP Support Assistant product. If I click on 'Cancel' and RRs another error HPSA "error 1714. Cannot remove the old version of HPSA. Contact the technical support.

  Need help, am at a loss on how to fix me:.

  My problem is finally solved! Thanks to another thread.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/HP-support-assistant-doesn-t-work-in-Windows-10/TD-p/5238243

  morgane_1771 suggestion to try revo uninstaller and then reinstall HP Support Assistant worked!

• HP support assistant program show question mark sign

  I have Pavilion dv6 in my program computer hp support assistant show sign of question mark please help me how do slove this problem.

  Where you see the question mark? HIS most recent HP icon is a circle of drunk with? in the middle.

• How to install hp support assistant after changing the hard drive on my HP Pavilion TouchSmart

  Hi all

  I have recently updated my hard drive and install windows OS 8.1. Okay, everything works fine. But, to get the latest drivers from HP, I want to install: hp support assistant "application. I am trying to download and install, start the installation but not showing any progress.

  I downloaded the folliwng to my product page ' HPSupportSolutionsFramework - 11.51.0027.»

  Any help will be really appreciated.

  Thank you

  MVR

  Hi mvr

  What is your exact model name, product number?

  Try to download, register & then install from this page: http://www8.hp.com/in/en/campaigns/hpsupportassistant/hpsupport.html#.VI62_0Trb4c

  Did you clean install Windows 8.1 or recovery media? Who was the operating system preinstalled on your laptop?

  Concerning

  Visruth

• HP Support Assistant: Intel driver Bluetooth

  The instructions say to remove the old driver before installing the new through the HP Support Assistant. But there is no instructions for the removal of the old driver. How do I do that?

  If all what you need to do is remove the old driver of bluetooth, you can do it in "Device Manager".

  In Windows 7:

  Go to 'Start'--> 'Control Panel'--> 'system and security. "

  Under "System" you should see "Device Manager."

  Click on that and it should bring up a list of all the devices installed on your computer.

  There may be a list of Bluetooth adapters, or it could be listed under network adapters. Is said passing, right-click on your adatper and select "delete." This will remove the currently installed driver. From there, you can proceed with the installation of the new driver.

  In Windows 8:

  Move your cursor to the lower left corner of your screen and right click. Select "Device Manager". Proceed as above.

  Let me know if there is something else you need!

• HP Support Assistant reported three driver updates available, but cannot be installed.

  HP Desktop p6-2036 c updated on 31/10/12: HPSA had the wrong product number must p6-2037cb.

  64-bit Windows 7 sp 1

  HP Support Assistant warned that there were three updates to driver for this computer.  One for IntelGraphics, a Realtek network controller and one for Realtek High Definition Audio Driver.  He set a restore point and downloaded the drivers.  But in each case after the installation, a red X appears in the status column next to the column Description of each driver.

  I found the following two Administrative events log:

  1)

  Log name: Hewlett-Packard

  Source: HPSFmsgr.exe

  Date: 30/10/2012 17:17:49

  Event ID: 2000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: PC - 1

  Description:

  HP error ID:-2147467261 at HPSA_Messenger.MessengerMainWindow.btnEventMsg_Click (Object sender, RoutedEventArgs e)

  Message: The object Reference not set to an instance of an object.

  StackTrace: At HPSA_Messenger.MessengerMainWindow.btnEventMsg_Click (Object sender, RoutedEventArgs e)

  Source: HPSFMsgr

  Name: HPSFmsgr.exe

  Version: 01.00.00.00

  Path: C:\Program Files (x 86) \Hewlett-Packard\HP Support Framework\Resources\HPSFMessenger\HPSFmsgr.exe

  Format:-en-US

  RAM: 4002

  RAM usage: 30

  TargetSite: Void btnEventMsg_Click (System.Object, ACE)

  The event XML:

  http://schemas.Microsoft.com/win/2004/08/events/event">

  2000

  2

  0

  0 x 80000000000000

  3

  Hewlett-Packard

  PC-1

  Error HP ID:-2147467261 to HPSA_Messenger.MessengerMainWindow.btnEventMsg_Click (Object sender, RoutedEventArgs e)

  Message: The object Reference not set to an instance of an object.

  StackTrace: At HPSA_Messenger.MessengerMainWindow.btnEventMsg_Click (Object sender, RoutedEventArgs e)

  Source: HPSFMsgr

  Name: HPSFmsgr.exe

  Version: 01.00.00.00

  Path: C:\Program Files (x 86) \Hewlett-Packard\HP Support Framework\Resources\HPSFMessenger\HPSFmsgr.exe

  Format:-en-US

  RAM: 4002

  RAM usage: 30

  TargetSite: Void btnEventMsg_Click (System.Object, ACE)

  2D32313437343637323631202020617420485053415F4D657373656E6765722E4D657373656E6765724D61696E57696E646F772E62746E4576656E744D73675F436C69636B284F626A6563742073656E6465722C20526F757465644576656E7441726773206529

  Others state of this concern, which I am on a laptop almost nine. I think that the problem is caused by a huge surge of Windows HP 8 drivers on the site of service the customer causing a glitch.

  You can check your page pilot to see if there are drivers, you need to upgrade. Choose your exact model HERE

• HP Support assistant questions

  I have a new dv6 HP Envy and have a question about HP support assistant... Today she flashed a message about updates, so I clicked to install... not using this tool before I'm curious to know what it's install or update and how long takes the habit... Looks like its takes a while... It seems to be 'quick launch '? Keeps flashing the Bios screen then complates update then recurrence... does not show me a dispute that its update... I don't want to "stop" and also when this is the case (as I type this) my watch 100 CPU, it is this normal releatively? Its been doing this update for about 10-15 min.

  Thank you.

  JC

  I went through and unchecked every update... and then rechecked each of them and install them separately... The CPU usage was minimal, and installation was fast... seems they must be installed separately and not suddenly... I hope this helps someone else.

  JC

• Cannot physically remove the hard drive from the Pavilion dv4-1430us

  The disk hard origianal in this Pavilion dv4-1430us makes mechanical noises, so I will try to replace it with a new one.  I checked the owner's manual supplied with the dv4-1430us, and it gives these instructions (here condensed): 1) remove the power cord and disconnect the battery, 2) remove the hd plastic cover, 3) remove three screws of hard drive now the hd casing in place and 4) pull hard hd tab to the left then go out.

  The problems are: A) there is no hard drive to draw labels, and B) after you remove the three screws, can't do the hd if I push on it to move to the right or remove it from the left.  I don't want to use tools like screwdriver large flat blade or bars of little Crow because it seems like that would probably break something.  Does anyone know how to remove the hard drive of this particular model without breaking something?

  HaggisCat,

  Thanks for a very detailed and quick response.  It turns out the indications that I read in the manual, your statements and mine were all in line to exert a force on the hard drive in the direction indicated by the red arrow on your image.  (A picture is worth a thousand words and your supplied photo clarity that my summary of instructional text has not.)  I decided to take a picture of the entire hard drive in my dv4-1430us (see below) to show that there is no close tab Mylar pull, as there is on the photo you condition.   (The same gray metal tab that appears in your photo, but no mylar tab).

  

  Apparently my dv4-1430us had some differences at its Assembly of HD compared to yours.  As you can see, the structural elements that surround the HD are very similar to those of your photo, but there is no narrow mylar like in your photo tag.  There is a dark mylar or similar film plastic on top of my HD, and there is a triangle of silver color at the bottom right of this film that points in the same direction as your red arrow.  I tried lifting up the end of this film, mylar and pulling that direction (to the right in this picture), but a part of it (in the upper right corner of this photo) began to tear.  As the film seems to only be glued on the top edge of the caddy HD (also called frame or cage in some articles), I doubted that the show was strong enough to eliminate the stress of a closed winching.  A comrade who has put a video on YouTube showing this procedure also indicated that he had torn this layer of film when he first attempted to remove the HD.  Because I assume that the dark film has a purpose (static protection?)  I gave up shooting at the right edge of the film.

  However the consistency of the instructions in the manual, the instructions on this YouTube video and instructions in your answer on the direction in which the Assembly needed to move HD gave me the courage to put a force pushing the HD in the direction of your red arrow.  To do this, I placed the tip of a flat blade screwdriver large (blade about 5/16 "wide) at the points indicated at the ends of the two yellow arrows in my picture.  In these positions, the blade of screwdriver pushed against the HD box and not the hard drive itself.  Each of these two places, I gave him some very closed but controlled scrimmages, and HD finally moved in the direction of your red arrow as it is supposed to.  I then lifted all of the HD and replaced the HD without incident.

  The action drag the new HD in place was much easier that it was removing the original HD for the first time.  It was perhaps because of some hard rubber padding that has been placed on each side of the original HD assembly that makes for a very tight fit.

  I hope that this description is useful for others who do not have used mylar tab in their computers laptops dv4 and those whose HD assemblies are very tight in.  Thanks again for your quick response that gave me enough comfort to move forward.

• HP ENVY all-in-one 24-n075na: HP Support Assistant

  Hello - I just bought a 24-n075na. HP Support Assistant repeatedly wants to update the following prodcuts
  
  "HP display OSD".
  "Intel Wireless Display.
  
  & then wants to restart.

  Hi@Lafrowda

  Thank you for visiting the HP Forums . One-stop shop for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Assistant Support HP several times the same update driver. Is this fair?

  I will definitely help you.

  You can try the steps from the link below and check if that helps.

  http://HP.care/2dyipUE

  If this does not help, then uninstall wizard support from programs and features in Control Panel.

  Download the latest HP Support Assistant from the link below and check if it works very well.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

  Let me know if this helped

  Resolv_S

  Happy to help you. I work for HP
  
  Please click "Accept as Solution" if you feel my post solved your problem, it will help others find the solution.
  Click on ' Bravo Thumbs Up ' to say 'Thank you' to help!