Energy

Similar Questions

• Safari with significant energy on El Capitan

  I just did a thorough cleaning and a reinstallation of El Capital, yet Safari still uses an important energy. Here are the details:

  With a full battery after reinstalling, got about 13 hours of life expectancy while Safari has also been opened with a tab. Not even 30 minutes later, this substantially reduced to 7 and then 9, without me open more applications or tabs or install anything. I also disabled all plugins and have some extensions on Safari, but in the battery menu, it says that Safari uses significant energy. There was no change of brightness of the screen etc - in fact I have actually reduced it yet. Initially, I put iCloud to synchronize certain things, including Safari, but since then, I have disabled the synchronization without change. In addition, it is a battery completely NEW, I just reinstalled from Apple, so I would keep it going as long as I can. I have attached a picture of the activity monitor because it shows nothing unusually high in there. Please help me understand what in Safari is the cause of significant consumption.

  

  

  Energy consumption depends on the activity open in Safari, a single Web site consumes more energy than the other. You should avoid using plugins if you want to extend your battery life. Battery remaining calculated time is just an indication based on current electricity demand.

• How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

  TT2

• Why can't access, save and print a PDF file from the site of EDF energy? Other work.

  EDF is my energy supplier and I use "Paperless billing" with PDF files for access, save and print my invoices in Acrobat Reader ms. I cannot do it in Firefox, but can do with all the other Web sites. I use I.E. 11 to access invoices EDF. Y at - it a Plugin/work around that I don't know it please? Thanks for your time.

  Hello jscher and thank you again for your continued support.
  I found the cause of my problem to the installation of the new Adobe Reader DC.
  The new Reader immediately now all PDF files new downloads to libraries > downloads. Previously, (under Adobe Reader XI and previous versions), this process had to be physically carried out. I rarely visit the source of downloads, so missed.
  CD player is now a very complex program and I need to explore further. Thank you for your advice and I apologize for what amounts to a waste of your time.

• energy consumption of iMac

  What is the power consumption of my 27 iMac late 2009 model, while in mode 'sleep'?

  Energy consumption and thermal information for iMac - Apple Support

• Energy saver settings missing from the Profile Manager

  I'm under Server.app 5.1 on a MacPro El Capitan (10.11.4) running. I am trying to create a fake profile in the Profile Manager to distribute to my class to illustrate patterns of school boards and want to create one for the energy-saving settings. Unfortunately, this option is missing! Where would it be? That's all I see for the operating system parameters:

  

  Elementary my dear Watson!

  • Ensure that you have a group of devices for the appropriate devices, whether it is portable Mac or iOS devices.

  

  • Register at least a device in this group

  

  • And continue to change the settings for this group
  • You will find savings on OS X to change

  

  • The same would be the procedure for iOS payload found in the part of the iOS.

  Hope that helps

  Leo

• energy consumption of iMacs

  Why put you a power 310w supply when at full load can take up to 360W? and who knows how many with lots of memory and i7 upgrades.

  They need at least 400W.

  It's really bad and it reduces the overall performance.

  Of course, the loss is thermal too but who cares for that when pay us that much for a so-called high-end machine...

  I do not understand you Dear Apple...

  Also why not to provide information about energy consumption when is right to the wall outlet? Do you know that it is not zero?

  And he plays 0.7W 2W to an iMac but 14.2 and other models is almost the same...

  Besides on temperature problems...

  and I have 2 iMacs comes only from your amazing operating system.

  I'd rather have an answer of an Apple certified technician.

  Thank you.

  This is a user to user forum. If you want to send Apple your concerns...

  http://www.Apple.com/feedback/

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• my computer keeps going to energy saving mode and TIME off

  each time my computer shuts down I have to turn power on wall to restart it and itgives me 10 minutes and will return to the mode and towers out of energy saving

  Why do you think a problem as it is related to Firefox?

• P50-A-144 satellite: the option 'never' is ignored by the energy save plan?

  Windows Home Version 1607 (Build 14393.187) 10.

  Hello

  all the options of setting energy save plan are set to 'never '.
  "Turn off screen" and "Modus after saving", "Battery" und "AC Adapter"
  But if I read a Document in Word or a Web page in Internet Explorer
  After some time of inactivity with the mouse, for example, the screen will be closed
  then the laptop energy saving modus.

  It seems that this started probably occur after the recent Windows Update Version 1511 to 1607.
  I've seen available for this model Toshiba drivers, but these are the same since the year 2015
  which I have already installed after Windows 8.1 migration to Windows Version 1511 10.

  Could you please help me?.
  Thank you.

  Additional information: it seems that if a user program is running (for example MS Word or Internet browser) and the computer remains on the desktop screen, the screen will be turned off and the laptop DO NOT go to energy saving modus, as expected, because the settings are set to 'never '.
  This means that the parameters of energy save plan are ignored if a user program is running, and there is no user activity, for example: the user don't move the mouse during playback of a document in the MS Word program.

• Satellite A60 and energy saving issues

  Hello

  I am facing a problem that drives me crazy. After I formatted my laptop and install Windows XP, I'm never able to install Toshiba Power Saver or any kind of Toshiba Utilities. Setup turns on, but after that, it displays an error message (sometimes just sound no message) and it stops.

  To be more precise:

  I use a Satellite A60-302, with extra addition of 256 MB of RAM. I formatted the C: partition and installed Windows XP Professional (I tried 3 different versions: right XP, XP with integrated SP1, XP with SP2 integrated; just to be sure if the problem was caused by service packs). Then I inserted the CD provided, put in place the ATI card, etc. its pilots respecting order but when it comes to saving energy, the nightmare starts.

  I removed the RAM I added and tried the whole installation by the original Setup process, but no change... My hard drives are well checked for any kind of virus, and the installation process was done with the ethernet cable connected to offshore to prevent any possible intrusion.

  Funny, I remember setting up Win XP Pro on this machine before 3 months no problem at all. The only significant change since that day is the update of the BIOS from 1.60 to 1.80.

  Looks like a "common modules" error but it is not "common modules", on the CD or on the internet.

  Finally, I must say that I can't use my recovery CD because it's Windows XP Home Edition in Turkish, but I use Windows XP Professional English provided by my employer.

  Any help? I'll be delightened if someone could help me.

  Post edited by: sunfury

  Hi sunfury,.

  I imagine you're nettled. But there must be a solution to your problem.

  You are right. There is no common Modules for this machine. Usually the common Modules, all Toshiba tools depend on. It is the main module.

  In your case, it is very important to use a specific order of installation. Normally, you must use the order of Installation set by Toshiba. You can find it on
  http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/install_xp_na_en.zip.

  But there is also another solution. I usually install on this path:
  -OS
  -chipset + display driver
  -audio driver
  -fix for... (all)
  -one other drivers (modem, LAN etc..)

  When you want to install the tools of Toshiba try in this order:
  -Power Sawer
  -Init GST
  -TOSHIBA Hotkey Utility
  -TOSHIBA Hotkey Utility for display
  -Other utilities
  -TOSHIBA Console

  If you want to install SP2, maybe it will be better to do it later. It is also possible that some of the tools after installation of SP2 will not function properly.
  http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

  If you still have problems made me know.

  Good luck!

• Energy saving of Toshiba on SP M30

  I have the same problem with Toshiba watch on my SP M30 laptop running WinXP SP2 and SP1.
  This utility generally LCD Brightness according to the level of the battery.
  If you connect your laptop to external power the display gets bright IF you are logged on as an administrator.
  This is not the case if the user has no administrator rights, the user gets the access denied message if you try to start this application.

  If I understand correctly Power Saver should adjust the brightness of the LCD screen automatically, or it should be at least possible to choose a predefined profile even if connected as a user.

  Energy saving settings may deny access to the application to users, but I don't have a check mark in this box.

  I tried to uninstall and reinstall the app without success.
  Even with no installed saver the screen goes black, and then even an admin can not fix it.
  Any suggestions?

  / Normunds

  Hello

  your first question is not clear as what experience do you have with the energy saver and SP1 or SP2? Could you write it down more detailly to facilitate the support of the community.

  In my opinion, you had installed as administrator energy saver and maybe you restrict the user rights!

  For the problem solve you should uninstall the energy saver and do a fresh install with the latest version of the page Web of Toshiba.

  Also, you should read the "Driver Update Information for Windows XP with Service Pack 2" which you can also download on http://eu.computers.toshiba-europe.com

  Go to support and download and choose your machine!

  Sammy

• 17-x013ds HP: HP laptop - 17-x013ds (ENERGY STAR)

  I recently bought VTIN SWAN Sport Helmet (VBT006) and have been unable to pair the device with my laptop.  Help or suggestions please?

  Hello

  You need a USB adapter as according to the technical specification your laptop doesn't have Bluetooth and wifi:

  https://www.Amazon.com/Medialink-Bluetooth-adapter-energy-technology/DP/B004LNXO28

  Product number

• Tecra R840 - Win8 - energy hibernation mode

  Hello

  I did the upgrade offered to W8, I am very satisfied with the W8 system, but the problem is that the laptop consumes battery also in hibernation mode.

  I wouldn't understand that energy consumption will be in mode 'sleep', but on the hibernation mode?

  I discovered that when the computer is in sleep or Hibernate, and I opened the lid, the computer automatically starts EVEN if the 'power computer when open cover' option is unchecked.

  When I select to shut down the computer - it does not react to open the lid, I have to press the power button.

  The problem may come from the windows system, that BONE tolds the computer wake up once the lid closed.

  The problem is, the computer starts to load whenever I wake up after hibernation (I had my 15 minutes of the Home Office, and it consumes about 1 to 2% of battery.

  It is quite annoying that my battery capacity full load is about 83% of the original (I bought my PC in June2012).

  I got Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.

  Does anyone has some clues?

  Thank you!

  Fact is that the battery capacity will decrease even if the laptop is turned OFF completely. Capacity of the battery will lose some percent of capacity. To reduce this review - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm
  A useful document for you can also be http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm

  > I Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.
  As far as I know that this option is not available on Toshiba laptops. When it is connected to AC notebook power supply starts to load the battery automatically.
  There is no possibility to change anything.

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• Laptop HP 15-r030wm: I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about how Tablet but idk how t

  I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about fashion Tablet but idk how to remove the keyboard. I have a Tablet one mode I tried but it work I would like to touch or use a pen?

  HP 15-r030wm Notebook PC (ENERGY STAR)

  Your laptop lacks a touch screen. Simply turn the Tablet mode is not capable if the material is not there.