engine moving leads

Similar Questions

• The sticky engine

  I have a very funny bug (?). In the extract which is attached when the condition for both cases structures become TRUE, I am turning off an engine power of 22KW, bit, he wrote to a function of writing DAQMX and goes to the next case. 3 of the 10 times that the engine cuts, leading to a messed up the machine sequence. I don't know that I'm passing to the next case as changes in Message string as expected. In fact this can occur only if the BAU changes before the cluster of output is written to. But I'm sure that it can happen that both are updated in the same case?

  What can be wrong in such a situation the DAQMX write failed to refresh at times? And being a random faultr, I am unable to conceive any trap the error.  Going nuts on the issue. Any tips? Or is there is a fundamental flaw in the approach? (The TimedLoop turns to 10ms without warning 'Finished' later).

  Thank you

  
  

• absolute position won ' [work t

  I have a card PCI-7332, leading the two cubes of GE Fanuc Stepper.  I'm using LabVIEW 8.5.  I use a joystick to move the two axes manually and it works fine.  When I change the mode of operation to the ABSOLUTE POSITION and try to type in a position for the engine to move, engine moving.  I tried to write a test case using the same code and it does not move the engines.  But, I can refer to move with an offset from an absolute position (movement reference, reset the zero position, move position offset) and it works every time.

  This is the test case that does not work on its own.  Thanks for any help on this.

  
  

• My Search Bar is goone? nothing to tap on search? What should do? Thank you

  Hello, I use long tome Firfox and very happy.
  However, since a week I DO NOT HAVE the appers to SEARCH BAR in the page...
  just no search bar and not google bar I normally have above...
  for sure all the pages have a... search bar but not when I open firefox... just a big google bar in the middle of the page...
  not leave comfrteble and it is impossible to work like this.
  your quick response will be very apprichated.
  Thank you
  Rami

  Hi ramimizrahi

  If you have lost only the search bar see Chris_ilias response above the "search" bar - easily choose your favorite search engine (moving or removing the search bar session)

  If you have lost the Navigation bar go view > toolbars > CONTROL of Navigation toolbar [v].

  Thank you

• How can I install the new updates___

  I have Vista 64-bit with Service Pack 2 is already installed, but am unable to install the new updates re: windows or office. One of the errors is '80070641'. I followed the instructions from Microsoft re: unable to install and read some of the forums found in the search engines which lead me to believe that my window Setup is corrupted or missing something. I went through this with HP as it was impossible to install updates also. I have a DVD of the operating system, but do not know how to use if appropriate. Give me options. If I need to recharge, can I just the installer? Should I save all my files first? Charleei

  Maybe this article will help you. Use the option "fix it for me":
  http://support.Microsoft.com/kb/971058

  t-4-2

• PERC 6 / I foreign config disk / how do I erase a disc

  Hello

  I replaced a RAID-5 disk with a hot spare that already has a foreign Config on that. I want to delete the config to the hand, I can scratch the disc so it will be detected as empty? (DD if = / dev/null of = / dev/sda)

  Best regards

  Eddy

  hottfix

  is this drive or the drives part of a raid configuration or drive tottaly does not work in the raid 5 or raid 1?

  Neither.  He is not currently a member of an array, but foreigners does not mean that it is totally "does not work".  The controller detected a configuration on the drive that does not match the other (s) in the table, so he scored like aliens until the admin can determine the best course of action for this.  It's absolutely a dangerous thing to (leave the admin to know the right thing to do with it), but this prevents the controller having to make decisions about the data, which makes it the responsibility of the admin to learn the skills needed to manage this live/die.

  You have two options with foreign configurations:

  IMPORT - must never be used when multiple disks are marked strangers simultaneously, including moving leads to a new controller/system, etc. and must be used when an array is offline.

  CLAIRE - should be used whenever the table is online and only one drive is marked foreign (or several disks in case it's a RAID 10/50/60, but the picture is still online). It is usually the case when a disk fails (or is a failure) or simply disconnects due to a timeout, etc. and is often the case when replacing a failed drive in an array.  Only after the cancellation of the foreign configuration the drive is possible a hot spare for the table in order to rebuild the disk in the array.

• Search for RoboHelp 9: heavy weight with multiple keywords?

  We work with the new search engine (moved from 7 to 9) and some problems with the way our users are used for research.  One thing came to the question of whether a single keyword added several times to a topic would a higher weight in the ranking of search of Robohelp 9.  Does anyone know if it will not consider multiple instances of the same word in the keywords in the properties of the section or if we can use for the bridge of the battery?

  For all those who stumbles on this, no - the search engine only has the word once and does not take into account all other cases.  Search result will get not more weight for the same keyword multiple times.

• the command before engine finished moving

  People,

  Need a little help.  I am trying to program an X - Y scanning for a microscope stage.  I want the scene to X at a certain position, stops, and then switch to Y at a certain position.  I have a function "wait (ms)" to ensure that the movement of X completely before the movement intervenes.   But it only works if I put in a very long time, like 10s for the 'wait (ms).  If I use a movement shortly then him there will occur before completing the X movement, in other words, both engines are moving at the same time, so this will not work.

  What I want is a command that moves the Y immediately, and only after the X.  Is it something like "wait until the end of movement"...?

  Thank you.

  It all depends on if your motor controller supports this feature.  What motor controller are you using?  How can you contact her?

• In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  In our Web page we have pages with lists of the pdf reports that we want to make available. I tried a search engine, but it only directs you to the page with the list. How can we lead the researcher to a specific report?

  Exactly, it would depend on how you have set the referencing of your site, please check the suggestions made in this tutorial:

  https://helpx.Adobe.com/Muse/how-to/sitemap-XML-file-explained.html

  In addition, you can check these:

  http://musewidgets.com/collections/all/SEO

  Thank you

  Sanjit

• Why Yahoo! is leading my choice of search engine?

  I keep resetting the preferences system for DuckDuckGo. All of a sudden, out of nowhere, even with double check my Prefs system, Yahoo! Is coming as my default search engine. Why?

  Frank

  Go step by step and test.

  1 safari > Preferences > Extensions

  Disable all extensions or turn them off, then restart Safari to test.

  Turn over some and test.

  2 safari > Preferences > Search > search engine:

  Select your preferred search engine.

  3 safari > Preferences > General > homepage:

  Set your home page.

  If this does not help:

  4. free use AdwareMedic / Malwarebytes Anti-Malware for Mac remove adware

  http://www.adwaremedic.com/index.php

  Install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit AdwareMedic.

  or

  Remove the adware manually by following the 'HowTo' from Apple.

  http://support.Apple.com/en-us/HT203987

• Is led and leads engine is part of Firefox

  It is software that I didn't know had been installed on my computer (or when), and I fear that it is malware.

  If it's a legitimate software so what use is it, and why I didn't ask if I wanted to install it?

  It is part of Zone Alarm, which you seem to have installed. It will install some components of the Zone Alarm for Firefox and IE toolbar even if you choose not to install the toolbar during the installation of Zone Alarm.

  • See-> http://forums.zonelabs.com/showthread.php?t=78490 & highlight = led
  • See-> http://forums.zonelabs.com/showthread.php?t=78376 & highlight = led
  • Zone Alarm forum site search for "led"-> http://forums.zonelabs.com/search.php?searchid=3067816

  Please ask any other question on this subject in the Zone Alarm forum-> http://forums.zonelabs.com/index.php

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• iOS 10 Mail: moving Messages, inconsistent behavior when you tapoterez folder icon

  iPhone 6, iOS 10

  I see inconsistent behavior when I try to move a message in Mail from in the message.

  In previous versions of iOS, during playback of an e-mail message, I could tap the icon of the folder at the bottom of the messages, and which would lead to the top of the hierarchy of the folders for the email of the message account. From there on, it was just a matter of tapping on the file I want to move the message to, and he settled there the message and look back to the Inbox display (or the folder view I moved this message of).

  In iOS 10, when I hit this folder icon, two things happen: it happens the same thing I described above, or sometimes, rather than see the hierarchy of folders, I see three buttons slide up from the bottom of the screen. The top button allows me to move the message directly to a folder in my account called 'Action' I created (I don't know why he chose this particular file to the default value for this button - maybe because it is first in alphabetical order of all my folders created by the user), the second button says "Another mailbox" and when it takes me to the hierarchy of the mailbox as described above, and the third button is a Cancel button.

  I can't understand what dictates which of those two things happening. I tried again and again on a bunch of different messages. Some do happen, some do the other thing happens, and sometimes I'll have a different behavior in the message even if I try again later.

  I prefer the old way. But I could get used to the new way, if I could at least choose what default folder appears in the first box.

  Anyone else seeing this?

  Someone knows how to change the default folder in the first box of this new process?

  Thank you!

  I seem to have solved the problem on my own. I went to settings > Mail, and in the "Threading" section, I have disabled "Complete Threads."

• all the research that lead to a result of site 'https' in "this connection is not approved.

  I was getting messages that update failed, I think that this has been caused by Lastpass update. I tried a refresh and my problem started. Tried to uninstall lastpass and FireFox then download Firefox (37.0.2), still have the problem. I can set Protopage as my home page, but all the bookmarks that lead to an https site get the untrusted connection. I tried several different search engines, same result. I'm running a 2011 mini mac environment. Please help I use FireFox for many years and many computers and I like it.

  Thank you!

  You can check who is the issuer of the certificates.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page to expand this section: "I understand the risks".
  • Click on 'Add the Exception' and let Firefox to retrieve the certificate ('Get')
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If this is not possible, then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• I accidentally moved my favorites on the menu. How can I undo this action and place bookmarks in the toolbar?

  Moved from my bookmarks toolbar by right-clicking on the icon and go to the menu. I would like to cancel this action and return the bookmarks on my toolbar.

  Try to use the personalization feature to drag it to the desired location.

  (Although you can right-click > move to the toolbar, you can use customize anyway because you probably don't want the double-button at the right end of the bar.)

  This article should lead you to it: Customize Firefox commands, buttons, and toolbars.

  Does it work?

• With the current caveat regarding internet explorer, your search engine 'google' is safe? If this is not the case, what would the search engine more safe?

  Same as above. I am concerned by the help of internet explore right now. I would like your answer.

  Firefox is a browser, not a search engine. Also, Internet Explorer is a browser, not a search engine. Google is a search engine (even if they make a browser called Chrome). Firefox is more secure than Internet Explorer, and you should consider moving to this full time. But Google is just a search engine used by Firefox to help you better use the internet and has nothing to do with the security of Firefox in general.