Enigma Windows 8.1 USB

Similar Questions

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• What is a Windows 8 certified USB flash drive?

  I just bought my 3rd USB flash drive in the hope of being able to copy my recovery image. My computer would not use the first two I tried all ports USB 4 - port 2.0 and 3.0. This time, I bought a HP flash drive who said that she supports Windows 8. I understand that I should not use a Windows 8 certified USB flash drive. Before I open this disc, I want to know if it's a. If so, I will return it not open - unlike the first two I tried.

  The States of package under requirements that Windows 8 is one of the necessary systems. For me, this does not mean that it is certified for Windows 8. Am I wrong?
  
  Computer: HP 500 - a60. 8.1 Windows (x 64)

  Hello

  Your question has not been answered by Erico on one of your other posts?

  If a piece of equipment is certified MS then it should be presented to MS for certification.  Some USB flash drives are marked on the package compatible with Windows 8, but this does not mean that the particular flash drive is "certified."

  There is to many, many USB flash drives that work with Windows 8. Some have argued that, if the USB flash drive as a 'removable' device, so it should work with the HP Recovery Media Creator.  However, I recently discovered that one of flash USB 2 (team F108 64 G) drives that I is not set up as a 'removable device' when you open my ThisPc (myPC) and it works perfectly for me.

• Z500 8.1 Windows 64-bit USB ports not working not

  Hi everyone, now I have bought a lenovo Z500. After update to 8.1 Windows 64 bit, USB flashdrives could not run properly eventually Explorer Windows did not. When I try to restart, it blocks on the screen "Restart" and I have to press and hold the power button to power unit off which is very dangerous for the laptop. Other usb devices work well as a drive external hard, mouse and keyboard. USB flash drive only have such a problem. When I insert my USB key, I hear the sound which indicates that a device has been inserted. It is not the usb flash drive, because I tried with different USB keys and the same thing happens. All USB keys works well on my desktop (Windows 7).

  Thank you..!!

  After you uninstall a software firewall, USB port, back to normal.

  Thank you.

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• How can I backup my windows vista on USB?

  How can I backup my windows vista on USB?

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  If you try to use a USB Flash drive, which is not supported on Vista.

• a hp laptop m7 of the upgrade to windows 7 to windows 8 deletes usb 3.0 drivers?

  Upgrade of a computer hp laptop m7 of windows 7 to windows 8 deletes usb 3.0 drivers?

  Hello

  Please check this:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/lost-USB-3-0-recognition-ability-after-Windows-8-upgrade/TD-p/1993581

  Kind regards.

• I saved a downloaded version 10 Windows on a USB key. What I should download Windows 10 by 29 July in any case to get it for free or I can wait until Windows no longer supports 7?

  * Original title: Windows 10

  I saved a downloaded version 10 Windows on a USB on my laptop Windows 7 SP1 to change my laptop at 10 Windows at a later date. What I need to download Windows10 by 29 July in any case to get it for free, or can I wait that Windows can't stand 7 and then use USB to update my laptop?

  Yes, there actually upgrade your current installation before the 29th, which means the 28.

  Download means nothing.

• How do we install 10 free update of windows on a USB?

  * Original title: install on USB

  How do we install 10 free update of windows on a USB

  You cannot install and use it, you can create a bootable copy to install on your local hard drive. Learn how to:

  How to download official Windows 10 ISO files

• How to recover the administrator password in windows 7 via USB

  I have a HP netbook mini and need to how do to recover the administrator password in windows 7 via USB that we forgot and had to load itunes from another Iphone.

  Hello

  You can use a utility to reset as in the free sample on the link below - using another PC, this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• Sony dcr-hc35e Windows 7 by usb connection

  Is it possible to connect a sony dcr-hc35e to a computer running windows 7 via USB?

  I could do it on my old XP computer but when I plug it into my new Windows 7 computer, it does not recognize the camera.

  Please help, I have several hours of footage of my little girl to download.

  You will need to check with Sony to see if they have Windows 7 drivers for your camera because Windows 7 does not automatically detect it.

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver&SR=NAV:service_support:Electronics:drivers_software:ESUP & Ref = http % 3A % 2F % www.sony.com%2Findex.php 2F

  Or you can transfer your question in the Sony Forums.
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I don't find it on the Windows 7 Compatibility Center, but it can still be compatible.

  Thank you

  Marilyn

• Can you have windows load from USB?

  Originakl title: USB to load Windows?

  Can you have windows load from USB because I received a laptop without the dvd disc and I was wondering if you can load the USB Windows operating system?

  See http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool.

  You can install, but does not work, Windows 7 from a USB key.  A DVD USB drive also lets you install Windows 7.