Entry fields calculations.

Similar Questions

• Changing the position of the cursor in a text entry field and remove digital zeros

  Flash8 - AS2

  It's good to be back after all these years and thank you for the people of faithfull as kglad, Ned Murphy, Rothrock and all others who give much of themselves to succeed this forum!

  My problem:

  I have a text entry field that is named in the box of properties like 'numberOfKids '.

  When the program is run, and a DELETE or BACKSPACE is pressed input textfield turns off

  and all the calculations that use the "numberOfKids" shows NaN.

  I got trapped in NaN and indefinite so that a digital 0 appears instead of a white one.

  There are two problems:

  First problem:

  The cursor to the left of zero, so the first number entered by the user is 10 x larger than what they want.  0 becomes 10.

  Question: How can I get the cursor to the right of 0?

  Second problem:

  When I manually move the cursor to the right of 0 and a number of entry, let's say 4, it appears like 04.

  Question 2: How to remove the zero digital in input textfield?

  Thanks for the help.

  Here is the code I use:

  calculateChildWeight = function () {}
  If (isNaN (numberOfKids)) {}
  numberOfKids = 0;
  }
  If ((numberOfKids) == undefined) {}
  numberOfKids = 0;
  }
  If (numberOfKids > = 0 & & numberOfKids < = 137) {}
  numberOfKids = numberOfKids;
  } else {}
  numberOfKids = 0;
  }
  If (isNaN (adjustedChildWeight)) {}
  adjustedChildWeight = 0;
  }
  If ((adjustedChildWeight) = undefined) {}
  adjustedChildWeight = 0;
  }
  adjustedChildWeight = Number (numberOfKids *(-100));
  numberOfKids.setSelection (numberOfKids.length, numberOfKids.length);
  If (numberOfKids.length = 2 & & numberOfKids < 10) {}
  remove the first character or no leading zeros
  numberOfKids = numberOfKids;
  // }
  };

  More important answer first: you get two helpfuls and one correct answer per thread. I think that once you give a specific answer a useful, you can't give the same answer. But I don't know.

  First of all, make sure that none of these text fields have a property of vars set.

  Also, you don't need to do it in two steps: revisedValue =-100 * parseInt (numberOfKids.text)

  As you read the value of your textfields of entry by using the text property, you also assign the value of the more dynamic by using the text property. That's what you do, right?

• Entry fields don't show up on my Android phone.

  Entry fields don't show up on my lg-ms695. I tried using different keywords, same thing.
  Any help?

  Thank you

  Felice

  Uninstall your firefox and restart your mobile and install fresh

  • https://play.Google.com/store/apps/details?ID=org.Mozilla.Firefox

• Customized for Acrobat field calculation script

  Hi, I have a field calculation script. I want to calculate exp (x), I want to link a X 'A' value. May I know what is the formula for this calculation?

  From another angle, I found at online, the operation is < 2.71 * X >, means 2.71 X power. But duno why <>* may not work to this end (power) to the custom calculation script.

  Do I know what other script can be created for exp (x).

  Please notify. Thank you.

  Of

  McCarthy

  Thank you all! I finally have the answer by myself already.

  Use this formula:

  Event.Value = Math.exp (this.getField("A").value)

  Yes!

• View 2 records text entry fields

  Hello

  New on ADF and want to know how to do a particular task:

  I have 2 lines with 2 different IDs and want to display two records one after the other, I can achieve this by using a table but I want to put the data in the text entry fields?

  FOR EXAMPLE:

  ID name City ZIP code

  1 Fred Bloggs Leeds LS1 2 minutes

  2 Gary Smith Liverpool L2 in 4NP

  is this possible?

  Thank you

  Hello

  You can make use of af:iterator. First, create a tree binding based on the data control and use something like this.

  It would show two lines of data. You can adjust the rows property to display the number of lines. If you want all the lines, remove the rows property.

  Arun-

• Pass a variable to a text entry field in a URL (was: I feel like it should be simple but)

  I think it should be simple, but I'm having a hard time finding how to pass a variable to a text entry field in a URL. I have a text input field ("enter your postal code') and a button that says 'Go '. When the user enters their zip and hit 'Go', I need the postcode, they came to pass in a URL to a new Web site so that they can see the offers in their region. This is a Flash 300 x 250 banner. Can someone help me?

  I can download my FLA somewhere and link to it if needed!

  Click on the frame that contains your go button and your textfield and paste Panel actions:

  go.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  navigateToURL (new URLRequest ("http://namebrandinsurance.com/auto/newResults.php?zip=" + zip.text + "& submit = submit"));

  }

• Captcha entry field width

  I was wondering if someone was able to manipulate the captcha entry field to do the same size as the image. He always seems to do 4 pixels wide. Any suggestion would be great. Thanks in advance!

  CSS it justr you do a width: 230px! important; on this subject, for example.

• Field calculated MDB a max date using rank

  Hello
  
  I need to get a maximum date within projects, and the date max must be a computed column. In the database there is the query I would use, how can I implement this in BMM, need help please, let me know if there is another way?
  
  Select a.commitment_date from
  (SELECT project, stage_id, commitment_date,
  DENSE_RANK() over (PARTITION BY project ORDER BY commitment_date desc) as rank
  of prod_detail) a
  Where rank = 1 a.project_id group;
  
  Thanks for your time and your help.

  Hi ssk.

  Your query in the DB online help, you can do 1 thing directly use this query in the physical layer and go to the-> new physical table and choose table type-> select and write SQL inside and paste this query it and joins appropriate to this table so he realized the extraction you want. So draw from this table to also be layer MDB.

  (GOLD)
  Take a new calculated column in the layer of MDB write it as max (commitment_date) and check the query SQL generated by BI server when you use this column in your application, by default, need to add group by clause adding columns to it.
  If you want to change the group by according to your requirement, and then go to the advance in the response criteria, find you the section group you specify a.project_id and check the results.

  Award points and close your previous message also @ssk field calculated MDB in the fact Table?

  See you soon,.
  KK

• Display the field calculated only when there is data

  Hello

  Is there a way to display my value only when the data entry field is used. For example, if I have several fields aligned vertically, I don't want to display a bunch of zeros if their data fields are not used.

  Thank you!!!

  You must write the script in the event of Field2 Calculate.

  The value of the FormCalclanguage.

  if(numPeople.RawValue ne null) then

  numPeople * 12

  endif

  My previous answer shows 2 ways to write the same script. A FormCalc and other JavaScript...

  Thank you

  Srini

• Average click boxes, and text entry fields are noted

  I create several CBT intended to show users how to navigate a new software. When I record, I choose the demonstration and training modes. For the part in training mode, I have several click boxes, and text entry fields. At the present time, when the user clicks on or between text, it has to click in the right place or enter the correct answer to move forward, otherwise a failure caption appears that says something to the effect of 'should have clicked here, please try again.' They try again and go to the next slide. When the training section is marked, everybody gets 100%.

  I was wondering if it is possible to create a user click in the wrong place or enter the wrong answer and still be able to advance to the next slide. So, not everyone would have a 100% automatic.

  Thank you!

  Mary

  P.S. I should also mention that I am using Captivate 4.

  Hello Mary,.

  As I wrote in my first response, simulation training is not intended to be marked. You should really start with a simulation of assessment to avoid having too many change thereafter.

  Have created a lot of assessments used in examinations (do not use an LMS, but this is not necessary) and my students would have been very happy if they could all have scored 100%.

  Enough joking. How you have configured the settings for the click boxes, text entry boxes, buttons? I give them only 1 attempt, never show failure, success, or legends of suspicion. As both actions for success or failure, I put in 'go to the next slide. The evaluation progresses so what was the action of the user, correct or incorrect. And the score will be awarded only if the user has performed the correct action. It works fine, really. If some actions need to be repeated several times, sometimes I will put the note of some of them to 0.

  Really think you can change the training simulation to work as an assessment, in the future it would be best to start with the last mode, possibly in combination with a demonstration or a training simulation.

  Does that help? My assessments are in Dutch, otherwise I could send you an example.

  Lilybiri

  PS: Be careful with the email reports, it does not always all right.

• Extraction of numbers, no strings of text entry fields?

  Hello

  I have two input boxes that I can type numbers in.  I would like a third entry check box to show the total of the first two.

  I set up a listener to button on the stage to perform a function that adds together when a key is pressed.

  It comes, he puts just the strings together - it ddoesn can't add them

  So, how can I tell Flash that box1.text and box2.text are numbers?

  Box3.text = box1.text + box2.text is not doing.

  Thanks for your time.

  Shaun

  Hi celebrities music

  You will need to get the string to a number.  Something like:

  var firstNumber:Number = Number (box3.text);

  var secondNumber:Number = Number (box2.text);

  answer: var number = firstNumber + secondNumber;

  Of course, you want to make sure that the text in the text field is actually a number and someone was not able to type in a Word.  The best way to do it is NOT to do the textfield a text entry field.  Instead make a dynamic text field and give it a MouseEvent.CLICK event listener.  When someone clicks on the dynamic text input field, bring up a keyboard that requires them to enter the number in this way.

  I have an application exactly like this one where students had to enter a number in a text field to understand the econ issues.  The workflow has something like:

  1. Click the dynamic text field
  2. Bring up the Enter key digital
  3. When the user clicks on a number on the keypad, text matching using a switch statement
  4. Add numbers to text in a string field, that way someone who, between '1', '3' '8' will get 138 and not 12.
  5. With each press of button, update the dynamic text field to show what the user enters
  6. With the user presses the Enter key, then mount this text field in number and store it in a variable of type number

  Hope that helps.  Let me know if you need help with the code for one of these steps.

• Text entry fields

  Hello.
  I have a clip that contains an e-mail form with text entry fields. This MC is then added to another clip which is then added to an another MC. When I test, text entry fields are displayed. The cursor changes to allow the input text, but you can not see the text and can't even see the white text boxes. Something that happens when the MC e-mail form is added to another clip, when you test the form e-mail MC on the main timeline, I have no problem.
  
  Help please as it is doing my head days.
  
  Thank you
  

  Yes they are, and after removing their everything works.
  You are the only person who was able to give a reason for my problem. We at flashkit or flashadvisor did not!
  I'll come here if I have another question.

  Bravo and thank you.

  M

• How to show that a text entry field is selected.

  Hello
  How can I show that a text entry field is selected when _focusrect = false; and I use flash lite.
  When the text input field is selected, I want to change is the border color or show a shape... something like that or even the color of the text.

  If anyone is interested, the answer is:

  When the field is developing the text will be empty
  kword.onSetFocus = function(oPrevFocus:Object):Void
  {
  KWord.Text = "";
  }
  When the update go away text will be keyword
  kword.onKillFocus = function(oNewFocus:Object):Void
  {
  KWord.Text = '- key word -';
  }
  :-)

• Calculations of text entry fields

  Hello
  I'm a genius game. Students must enter the equations of power and check that the equation is just that must add up to zero. There are two input fields, the student meet with values of strength expressed in letters like HA, WILL and MY and a field hidden, where the values are expressed as numbers. They have also entered operators as part of the equation. I need to make sure when they click on a button to check if their equation is correct, the content of the text field is calculated to see if the equation adds to zero. I know that you can express the content as a number Say number (this.my_hidden_text.text), but how do I get the operators into the equation, which are +, -, *, /, (,), and ^ to mean something and do what they are supposed to?
  
  Any help would be welcome.
  Thank you for your time,
  Beatie3

  Okay look hard enough and generally, you will find someone already realized what you need and I found this little beauty here: Flashgizmo. The code is on the site as well as a working example. It is very easy to recreate, and it analyzes the equations beautifully. Michael Kantor is my other guru beside kglad.

  Of course, now I have to work in the context of my gui, but I would have to do some work.

  Thanks again,
  Beatie

• PDF form field calculation need help

  I need to do some simple calculations on a form pdf and need help.

  I have a form field for number of guests.

  Fixed a field for a cost for several tickets (there are 3 levels of ticket prices) (I might not need this field).

  A subtotal of the guests in attendance and ticket prices.

  Total subtotals.

  I can't understand how to place a fixed cost in a form field or calculation of entry so that the number of tickets is multiplied by a fixed number and gives me a subtotal.

  Thank you.

  Use the Notation Simple option. Just enter the number for packages

  himself. For domain names, you can enter the actual names, as long as they

  do not contain no spaces or other special characters.