entry point addition and name changes

Similar Questions

• Email and name changed

  I got an email and a name in the profile, I opened first to use Kuler. I then wanted to change the name of my wife so that she could have the credit for the color schemes she did. I advanced and passed the email while I was there. Now, connect us with the new e-mail and none of the color schemes she does are listed under his name. Seek us the previous name and find the colors still exist, but we cannot open the original user.
  
  I thought that the name change would simply change the name and email does not delete the original user. These colors can be moved into the new user?

  We have discussed this issue with 2 accounts and it is related to authentication. Your original email account is no longer a connection accepted on Adobe.com. Either set up a new account with the original e-mail or log into the new account and him switch back the email to your original e-mail in the account of your editing area. You should get access again with your old email. Let me know if this does not work.
  Saami

• Why should I authenticate all my moves and name changes

  For my every move (including to the trash), and changed its name to the files or folders, I'm prompted to authenticate. It is not necessary. Is there something to do or change in the settings?

  Can be permissions on your disk or in your House foilder.

  To check your disk, right-click on your hard drive and choose 'Get Info'. Turn the triangle on the sharing and permissions. That's how must be configured...

  

  If they are not defined in this way, then click on the padlock icon, authenticate and make them so.

  If it looks good, then repair permissions and the ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• Guarantee of address and name, change of my Qosmio X 770 10

  Hello

  I would like to change the address and the name of my Qosmio X 770 10 but since I have the invoice, the purchase date and necessary serial number, I do not have the requested email and cant opbtai it cause the former owner of this Qosmio is now inaccessible (and not legally obligated to give me his email address but gave me the original of the invoice for the notebook change owner to toshiba)

  Please what is the way to display that in your database?

  Best regards, Jean-Louis (EUROPE - FRANCE)

  Hello

  Contact the nearest Toshiba service provider and ask for help. They can communicate directly with Toshiba and help you.
  You can also try to call the hotline of Toshiba and ask some trick.

• Feature request ACR - support for the predefined folder and name change

  Please add the ability to organize the first files camera presets. He quickly gets to be too many presets in one place even with a naming structure well-thought-out. Renaming within ACR would also be a great improvement.

  Please add your suggestion to the link below.

  Feature request/Bug Report Form

  Kind regards

  Mohit

• WARNING! : no entry point found

  I'm trying to implement another entry point to put an overview icon. I'm following exactly the steps in the developer's guide and instructions in the article (I think!).

  1. I created a 2nd project

  2. this project is defined as a "Point of entry to the CLDC replacement request.

  3. the "System Module" and 'Autorun at startup' flags are both checked.

  4. the project is set to be another point of entry for the name of my main project.

  5. my main project has a string as parameter the value for main() when you click the "gui".

  When I compile this project, I get the following (on the draft of an alternative entry point) warning:

  WARNING! : no entry point found
  WARNING! : no definition not found for static exported routine: .main (String [])

  In addition, the main() routine is never touched to auto-start. However, when I click the icon, the main() routine is hit with the setting "gui" implemented in the main project.

  No exception is thrown. I use the JDE 4.3.0.1r, but I've also tried it on others with identical results.

  Change the attributes of the entry point to be 'CLDC Application', just to smile and compiled. No change, still has the error.

  Changed to "Other entry Point" again and compiled. Problem goes away.

• Loop through the sequences selected using set of entry points into LabVIEW OI

  Hi all

  I have an operator Interface where the operator has the option to select specific measures and loop over the sequence selected according to the needs.

  

  Everything works as expected, but the customer wants to remove the default loop configuration pop-up box.

  

  Must be defined by programming the parameters of the loop (and not by the user). I figured out how to build arguments interactive but don't know how to spend it.

  

  Any ideas / suggestions would be greatly appreciated.

  Thanks in advance.

  Kind regards

  SS

  UnspecifiedError wrote:

  I am aware of this method and it works well, but the requirement is to run with the model process for example 'Test DUT' entry point

  Use SequenceViewMgr.ExecutionEntryPoints to get the corresponding entry point object, and then use EntryPoint.LoopOnSelectedSteps ().

  Hope this helps,

  -Doug

• Procedure entry point __lc_collate_cp could not be located in MSVCRT.dll and services.exe

  After restarting my computer when you are prompted, I received the following error message
  SERVICES. EXE - NOT FOUND ENTRY POINT

  "" The procedure entry point not found _lc_collate_cp_func in the dynamic library MSVCRT. "." DLL.

  I can't go in front of her and the computer does not start
  Do you have any idea what this might be or how to fix it?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?

  Try the steps outlined in the article below and check if this help.
  Error message: Procedure Entry Point not found in Msvcrt.dll file
  http://support.Microsoft.com/kb/324762

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Error number statup topic = the procedure entry point xml name AppleSyncNotifier.exe text reader const could not be located in the dynamic link libxl2.dll

  Original title: sign of problems

  at the start of my system, I get the following, called = AppleSyncNotifier.exe he then continued to say in the dialog = the procedure entry point xml text reader const name could not be located in the dynamic link libxl2.dll, it prevents me from doing whatever it is on the opening page, anyone help? John

  Hello

  AppleSyncNotifier.exe is part of ITunes. To resolve the issue, try the following methods.

  Method 1:

  I suggest that you download and reinstall ITunes since this link provided below to fix the problem.

  http://www.Apple.com/downloads/

  Method 2:

  You can perform the clean boot in order to eliminate the problem.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  For further assistance, you can get in touch with support for ITunes.

  https://discussions.Apple.com/community/iTunes?CategoryID=149

• Can monitor foglight setpoint in a directory? The directory name is a date and it changes everyday

  We must control the newspapers written in verse a directory. This directory name changes every day.

  Your help is highly appreciated

  Concerning

  Laetitia

  Hello George,.

  We rely on the LogFilter agent to monitor files that reside in the bearing of the directories.  If you deploy this agent and then change the properties, so that you will see an entry for check Log - 1 way and especially in your case a selection check the Log - 1 subdirectories.  If you do this, Yes, then the search will be for the last file-day although there are in the subdirectories.

  Otherwise said, in your case go back a directory and search for the particular file name and the LogFilter will search for the sub - directories and find the most recent, even if file name your directories to change names every day.

• BES10: Entry-Point-Name in the file descriptor META-INF/MANIFEST. MF is not valid

  Hello

  We have a Headless, built using 10.3 SDK Blackberry app. It has two parts. User interface and service without a head. We are able to package, sign (using the certificate of the company) and test it on BB 10 devices. Up to now, we use chrome extension 10 BB playbook/App manager to install the application on the device, but today when I tried to publish the App via our system's internal BES10 I get following error.

  • The "Entry-Point-Name" attribute with the value 'Background to the ExampleApplication Service' in the file descriptor META-INF/MANIFEST. MF is not valid.

  It seems that BES10 Server loved point of entry for background service but don't know why? It works fine when download us it via the chrome extension 10 BB playbook/App manager. Attaching sanitize bar - descriptor.xml for reference.

  Yes, it seems that there are limitations on the maximum length of the name of the application when published by BES (25 characters). Strangely affecting 'Point-name entry' to less then 25 characters solves the problem.

• How in the form of refresh/reload after having changed entry point?

  Hello

  My version of the apex is: Application Express 4.2.5.00.08

  My problem is: I can't as a reload/Refresh (ID = "f_details") after the point of page (NAME = "P14_SEARCH") value?

  My step is:

  1. change sql source to join:P14_SEARCH element of page in the code...

  select 
  "ID",
  "ID" ID_DISPLAY,
  "PROJECT_ID",
  "CREDIT",
  "DEBIT",
  "SECTION_ID",
  "ACC_ID"
  from "#OWNER#"."T_PROJECTS_DETAILS"
  where "CREDIT" = nvl(:P14_SEARCH,"CREDIT")
  

  

  2 - I have created dynamic action on the item page P14_SEARCH...

  Event = change, Action = fire on loading the Page, run the JavaScript Code = No, the selection Type = region, affected items = Tabular_proj_details

  My JS code is:

  $('#f_details').trigger('apexrefresh');
  

  3-change Enable partial Page Refresh on 'YES '.

  Now I can not filter data in the form of depend on P14_SEARCH value, because under the form of not refresh/reload the new data..! 

  That's my problem.

  Sorry for the mistake of language.
  

  Help me please,

  So f_details is the static ID for the report?  You can replace your real action with action to refresh and select the correct region.

  Also, did you include P14_SEARCH in the field "Items to submit Page" located right underneath the Source SQL?

  Oh and one thing, without doubt the most important, turn on "Partial Page Refresh" under the report attributes. I think that it is set to no by default on the Forms tab (but I didn't test it).

  Thank you

  -Jorge

• Error and pointing the domain name on business catalyst site.

  Hi guys I searched for a solution to this problem, but I can't really find a good answer. I'm relatively new to the website management just a heads.

  in any case, I have re-done recently the site for my business using Adobe Muse and we bought one of Adobe on BusinessCatalyst hosting plans. We already had a website hosted on Wix with the Verio domain name. We closed the Wix site has received and has changed the name of the server in Verio to point to the new site of catalyst for business, but every time I try and add the domain to the site I get an error message. It is said "error: domain name already exists." Please remove all records associated with that domain name before adding it again. "I thought he should have clear benn because we removed all Wix services and show name servers.

  Any help would be greatly appreciated! Thank you!

  That error means that the domain name is already in the system of catalysts for the company. Is it possible that you tried implementing a different Business Catalyst site with the domain name?

  I'm moving this thread on the forum of Business Catalyst for more detailed for you help.

• Error message: "the entry Point of procedure aspSearchInterfuce not found in the library of links dynamic wlanapi.dll" after SP 3 and IE 8 displays.

  Original title: Windows XP Home error message

  I reformatted the hard drive and restorded factory settings. I've upgraded to Service Pack 3 and IE 8. I now receive the errors listed below and the computer does not turn off. I have to hold in the power button to make it stop.

  Errors:

  The procedure entry Point aspSearchInterfuce could not

  Be found in the library of links dynamic wlanapi.dll

  The apsInitialze procedure entry Point could not be

  located in the library of links dynamic wlanapi.dll

  can someone please tell me what are these errors and how to fix?

  Hi Daytona931,

  Hope you were able to resolve the issue and thank you for sharing the information.