Satellite L30 - no sound when I add the additional speakers or headphones

Similar Questions

• My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  It was AC off recently?

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Satellite L30 - 11 d is not recognizing the full RAM

  Hello

  I have a Toshiba Satellite L30 - 11 d, as shown in the subject. I had the laptop for a year before, I decided to move the ram to 2 GB. In 2008, I bought a RAM 1 GB DDR2 5300 AENEON chip and another microphone technology DDR2 5300 s 1 GB RAM chip.

  These two circuits are compatible with my laptop. These two circuits work in the two slots of RAM and CPU - Z can confirm that there is 2 GB of memory in my laptop. However, Vista was unable to register for 2 GB, instead it sees only 896 MB of RAM. After a few months of frustration, I decided to downgrade to Windows XP Professional to see if she could remedy the situation and allow my life become a little more smooth. However, the same question is still involved.

  Literally 10 minutes ago, I confirmed that these two circuits operate in the two slots of RAM and CPU - Z can confirm that there is 2 GB of Ram in my laptop. BIOS, graphics and all other drivers I can enter on the Toshiba site has been installed and it's really just leaving me completely stumped. If someone has any ideas as to what could be the problem, it would be highly appreciated.

  Thank you for your time,

  Ash.

  It's very strange
  Also the shape of most recent BIOS, from Toshiba Web site is installed did you say?

  Have you tried to use two modules of the same production? I think it is the reason for this. Notepad starts with the two modules, ok, but I think that must be the reason for this. In your case I would test it with two modules of the same production.

  In addition, the video RAM is shared with the RAM. Then don t forget you can use 2 GB only for main memory.

  Sorry, but at the moment I can say s.

• When you add the network printer

  When you add the printer network TCP/IP port option is not in the drop-down list

  The TCP/IP port selection will not be on "Add a network printer" it will be on "add a local printer.  You want to feed the printer directly.  In the printers and Faxes folder, click on 'Add printer' > next.  Select "local printer attached to this computer.  Do not check "automatically detect and install my Plug and Play printer."  Click Next.  Select "Create a new port" and choose "Standatd TCP/IP Port" in the menu drop-down.  Click Next, click Next again (in the "Add Standard TCP/IP Printer Port" Wizard), enter the printer's TCP/IP address, click Next, and then finish.  You return to the add a Printer Wizard.  Select the driver, and then complete the wizard. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• When you add the same audio clip of chronology not added?

  When I add a clip to the timeline of the first audio is also added as usual. When I add the same clip again, that it does not come with the linked audio file. When I hover over the blue icons in the project window, it is said "audio video used 2 times 'and' related used 1 time" I want audio to be also with the clip on the second clip. Why does this happen?

  FAQ: Why no audio or video will not at the track where I let down?

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• When OMF add the data file in the tablespace

  Hi friends,

  We use oracle 11.2 with CMS (oracle managed file) for the database on the linux platform. the parameter - DB_CREATE_FILE_DEST had been set. at the present time, we received a message from global warming this tablespace criterion is 85% full.

  According to the document of the oracle, OMF auto will add a data file in the tablespace tast. more than a week, I do not see any data file has been added by OMF.

  I want to know when OMF adds the data file in the tablespace? 85% or 95% or some (parameter) setting this action?

  Thank you

  newdba

  OMF does not automatically add a new data file.  You must explicitly add a new data file with the ALTER TABLESPACE ADD DATAFILE command tbsname.

  What is OMF is to provide a Unique name and a default size (100 MB) for the data file.  That is why the ALTER TABLESPACE... Command ADD DATAFILE that you run didn't need to specify the file size or file name.

  Hemant K Collette

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• Port USB of the Satellite L30 stop Windows when using

  I recently bought a Satellite L30 (psl33E) for my wife and everything seemed fine. That was until she needed additional usb ports for his stuff and used the port on the left side of the machine (as opposed to the one still in use, in the back). As soon as she tried to use this port in particular, the close dow and has done since then.

  Could someone tell me please how to fix this, because it is only a few weeks old, and I don't want to take it back to the store where it was purchased.

  In the hope of a miracle.

  TIA.

  JimmyMack.

  Hello

  It really looks like a serious hardware problem. I guess that the USB port cannot deliver enough power when other ports are in use.

  If I were you I bring the machine or contact the nearest available service partner in your country and allow them to correct this problem.
  Here´s a link to find the closest of the ASP available in your country: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  See you soon

• Satellite 2410: No sound when playing a CD, MP3

  These are the probs I meet since the installation of a webcam and SKYPE.

  Computer:
  Toshiba Satellite 2410
  Chipeset
  I845mp Intel Brookdale
  Pentium 4-m 2 GHz mobile

  There is no sound on speakers on board when playing a CD, MP3 etc. Its generated only is a warning tone if a mistake is made.

  Windows cannot execute DPVSetup.exe, use Add/Remove Programs Control Panel to install.

  DirectPlay Voice has encountered an error.

  Since then I can listening is more than an audio CD and the system does that sounds very basic IE even not the standard windows start tune.

  I checked the Audio and audio tab in the control panel that now tells me that there are no speakers available on my laptop? Is there a driver I can download?

  I tried to reload the drivers from the CD tools but still problems

  Hello

  According to Microsoft Knowledge base article, the error message appears because when you change the Audio hardware acceleration affecting None this removes the device hardware acceleration of the list of possible devices. However, DSound continues to try to map to the device.

  Windows cannot execute DPVSetup.exe, use Add/Remove Programs Control Panel to install.

  Please read this article:
  http://support.Microsoft.com/kb/282882/en-us/

• Satellite L30: audio sound does not work - WinXP SP2

  Hello

  I just bought a new laptop (Satellite L30 PSL33E-02S01LBT). He had installed Windows Vista, but it was horribly slow.

  I installed Windows XP SP2 on it's updates. I installed all the drivers from toshiba site I could find for my model.
  Everything works fine except the sound. I tried to install the drivers found on the toshiba Web site, but it fails with this error:
  'No pilot only is supported in the suite of drivers' (AKA FRENCH: 'no driver no is supported in this suite of drivers').

  In my list of equipment I have this with a "?":
  (?) Audio device on High Definition Bus Audio

  I tried to install the Realtek drivers with 5.10.0.5273 version.
  Found the driver here: http://www.mbnet.fi/ajuriapaja/info.asp?AID=10015&TID=10431&OS=10
  This driver has been installed successfully, but the sound still doesn't work.

  So, I removed this driver and found my "Audio on Bus High Definition Audio device"...

  What could I do? Is this computer model toshiba laptop has problems with XP and the sound?

  Thanks for the help...

  Mico

  [Edited by: admin on March 8, 2007 20:21]

  Thanks for the solution Abe! :)

• Satellite C855 - no sound when plugged headphones

  Hi all

  I hope someone can help me.

  I had my C855 Satellite - part 2F3 no: PSCBWE-0H600NEN since April and have used my headpones in it several times and it worked fine.

  I used this morning and he was working then suddenly stopped, whenever I try and play something say I can hear music sometimes, it seems not complete but always singing to music can never be heard or sounds like he's under the sea and all deformed.

  This also happens if I watch something on Youtube if there is music on the vid I am I've heard that, but not the language in the video. can someone please help me resolve this issue.

  My speakers when headphones are connected work well, I'm heading what I shouldn't...

  Thanks in advance for help you

  Hello

  I m not very well why this happens only to the connected headphones but from my point of view, this looks like some sort of sound profile was selected. something similar to karaoke etc.

  The sound chip seems to be Realtek. Therefore the DD Realtek Audio Manager should be preinstalled on your laptop.
  You should find it in Control Panel-> Realtek HD audio manager.

  I recommend you plug in headphones and check the sound profiles of the Realtek HD audio Manager.
  Maybe something has been chosen which affects the audio output through headphones.

• Pavilion 27xw & Envy 15 laptop: how to keep sound when connected to the laptop

  Have a laptop 15.6-inch Envy running on Windows 10 and rose just a monitor 27 xw Pavilion, they are connected by a HDMI cable included with monitor
  
  If there is sound broadcast when I connect the HDMI cable it continues to broadcast through the speakers on the laptop, but if it stops then it don't re - start not to broadcast while connected.  If I disconnect the monitor then the sounds spread through the laptop.

  How to work around this problem?

  Jimmy, welcome to the forum.

  You must connect the monitor to the laptop and go to control panel / sound.  You must make sure that the speakers to the monitor are set by default.  If you do not use the monitor all the time, you may need to do this every time you connect it.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A660-133 - Vibrations when I use the keyboard or a touchpad

  Hello
  I have a Satellite A660-133, when I use the keyboard or the touchpad I can hear a lot of vibration from the stop of the laptop. I think that this is not normal, but actually the same model showed in the shop does the same thing. What do you think about this?

  Is there anyone who has this model and who is able to tell me what is its experience in this respect?

  Thank you!

  Hi davmat,

  I m not Satellite A660 owner, but a friend told a. He never spoke to me such a problem expect that s a great notebook with powerful hardware and he likes the design. I agree with him that s a great notebook from Toshiba!

  Anyway, if you think that it of not normal, you need to contact a service provider authorized in your country. Guys can check this problem and maybe you need a new keyboard, but this can be exchanged under warranty.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)