Enum cohersion Dot on the instruction box
Eveining.
I've been modifying the vi attached today to add the ability to manage several different Enum U16.
Previously, it there was only a single typedefed enum U16 in controls [] controls entry and the typedef Enum constant was so in the case of U16 Enum.
Because there are now 2 different typedefed Enum U16 in a new control that is passed in the [input controls, I had to change the vi as Variant data function was causing an error when the variant does not correspond with any one of the types. To do this, I added the new deal structure and wired the exit TypedeInfo of the fuction Type Variant via a Unbundel by name to the case switch terminal. Inside of each case, I put a constant of the Typedef Enum, which must be transmitted to the data vi Variant. Unfortunately as one of the Enum constants are not of the same type, the tunnel exit of the new structure of matter is cohursts so that the data on the screen of the Enum Digtal and not the name of the element.
This therfore means that the output of the variant of the data function now returns the digital display number and not the name of the element. Unfortunately this messing things downstream.
He he not cohurst and the collar of the element names instead of the digital display. I guess it would be possible to do with a funtion Selector, but then it does not changes possible futher.
All ideas
Concerning
M
If you use "format string" or "type cast" with an enum, it converts it into a string that you can wire in the selector box structure. Because your type definitions are different, you will always get the coercion.
Your VI, you need to move the variant to the data inside the structure of the case and then put inside the case of the Enum U16. Something like this should work:
Oh, there's also an OpenG function called "Get Strings of Enum" that returns the enum value currently selected and all the strings of the enum.
Tags: NI Software
Similar Questions
-
Distinct count in the instruction box
-------------------------------------------------------------------------------------------------
SELECT A.P_ID,
B.P_NAME,
C.P_DESC,
SUM (CASE
WHEN A.DATE BETWEEN TRUNC (ADD_MONTHS (LAST_DAY (SYSDATE),-4) + 1) AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)),-1)
AND A.M_ID IS NOT NULL
THEN 1
0 OTHERWISE
END) AS COUNT,
SUM (CASE
WHEN A.DATE BETWEEN TRUNC (ADD_MONTHS (LAST_DAY (SYSDATE),-4) + 1) AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)),-1)
AND A.M_ID IS NOT NULL
THEN COUNT (DISTINCT A.M_ID)
0 OTHERWISE
END) AS UNIQUE_COUNT, / * is not possible * /.
SUM (CASE
WHEN A.DATE BETWEEN TRUNC(SYSDATE,'YEAR') AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)), - 1).
THEN A.AMT_1
0 OTHERWISE
END) AS TOTAL_AMT_1,
SUM (CASE
WHEN A.DATE BETWEEN TRUNC(SYSDATE,'YEAR') AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)), - 1).
THEN A.AMT_2
0 OTHERWISE
END) AS TOTAL_AMT_2
FROM TABLE_A A,.
TABLE_B B,.
C TABLE_C
WHERE A.P_ID = B.P_ID
AND B.PT_ID = C.PT_ID
A.P_ID GROUP,
B.P_NAME,
C.P_DESC
----------------------------------------------------------------------------------------------------------
Hello
It is a simplified version of my request.
I'm doing 4 things here,
1. the County A.M_ID
2 County has separate .M_ID, is where I have a problem.
3 and 4. It is just the sum of 2 diff columns.
Note that the dates for the County and the amt are different and I can't hard-code the.
Can someone help me step of distinct count?
This query runs also a bit slow.
So all suggestions, comments are welcome.
Note: TABLE_A REB 700 million, TABLE_B 4 million and TABLE_c is located only 500 RECS
Thank you!Advantage of the fact that aggregate functions more ignore nulls, you could do something like:
SELECT a.p_id, b.p_name, c.p_desc, COUNT(CASE WHEN a.date BETWEEN TRUNC(ADD_MONTHS(LAST_DAY(sysdate),-4) + 1) AND ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) AND a.m_id IS NOT NULL THEN m_id END) AS countall, COUNT(DISTINCT CASE WHEN a.date BETWEEN TRUNC(ADD_MONTHS(LAST_DAY(sysdate),-4) + 1) AND ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) AND a.m_id IS NOT NULL THEN a.m_id END) AS unique_count, /* entirely possible */ SUM(CASE WHEN a.date BETWEEN TRUNC(sysdate,'YEAR') AND ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) THEN a.amt_1 ELSE 0 END) AS total_amt_1, SUM(CASE WHEN A.DATE BETWEEN TRUNC(sysdate,'YEAR') AND ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) THEN A.AMT_2 ELSE 0 END) AS TOTAL_AMT_2 FROM table_a a, table_b b, table_c c WHERE a.p_id = b.p_id and b.pt_id = c.pt_id GROUP BY a.p_id, b.p_name, c.p_desc
The two statements inside the COUNTY box return a.m_id or NULL. A simplified test case is:
SQL> WITH t as ( 2 SELECT 1 m_id, 9 dt FROM dual UNION ALL 3 SELECT 1 m_id, 6 dt FROM dual UNION ALL 4 SELECT 2 m_id, 9 dt FROM dual UNION ALL 5 SELECT 2 m_id, 6 dt FROM dual UNION ALL 6 SELECT 1 m_id, 5 dt FROM dual UNION ALL 7 SELECT 2 m_id, 5 dt FROM dual UNION ALL 8 SELECT null m_id, 9 dt FROM dual) 9 SELECT count(CASE WHEN dt BETWEEN 6 and 9 THEN m_id end) cid, 10 count(distinct CASE WHEN dt BETWEEN 6 and 9 THEN m_id end) cdid 11 FROM t; CID CDID ---------- ---------- 4 2
I'm not entirely sure that you really need the IS NOT NULL predicate a.m_id in the instructions BOX, but I left it for more security.
John -
Problem with variable referencing of presentation (KEY Date) in the instruction box
Hello
I'm trying to reference variables of presentation created on a Date column in the instruction box to one of the columns in the query, as shown below:
-case when '-citation details. "" "Created" between ' @{of} {1999-1-1}' and ' @{until} {2999-1-1} "then"-quote Metrics. " "" end of number of citations.
I m getting a view displays error message with the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 1861, message: ORA-01861: literal does not match the format string to the call of the OIC OCIStmtExecute
SQL issued: SELECT "-quote Types '." Name of level 2 Saw_0', case when '-citation details. "" Created "between" 01/04/2009 ' and ' 15 / 04/2009 ' then '-quote Metrics ' "." number of citations"end saw_1"(unit) - CATALOGUE of quotes"WHERE"-citation details "". "" Date of creation"BETWEEN timestamp ' 2009-04-01 00:00:00 ' timestamp AND ' 2009-04-15 00:00:00 ' ORDER BY saw_0
When I created the prompt on the date field, I put the following in the command prompt:
Cast ("-time".) Day)
When I apply a filter on the query using these variables, it works fine.
If anyone has faced this kind of question earlier and have a resolution, please help me.
Thank you
KitengeHello.
Select the double - A NON-VALIDE MONTHS TO_DATE('1999-1-1','mm/dd/yyyy')
Try this:
OLD: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {1999-1-1} ", mm/dd/yyyy)
NEW: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {01/01/1999} ", mm/dd/yyyy)and
OLD: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {2999-1-1} ", mm/dd/yyyy)
NEW: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {1, 1, 2999} ", mm/dd/yyyy)and if not ok after that, after an error in query SQL of NQQuery.log.
Kind regards
Goran Ocko
http://108obiee.blogspot.com/
-
need help in the instruction box
Dear experts,
IM using oracle 11g
CREATE TABLE PAYLOG
(
ID VARCHAR2 (20).
DESCRIPTION VARCHAR2 (20)
);
INSERT INTO PAYLOG VALUES ("1, ' NOT CAPTURED");
INSERT INTO PAYLOG VALUES(2,'CAPTURED');
INSERT INTO PAYLOG VALUES(3,'APPROVED');
Here is the example output query example, I needed to know.
SELECT THE CHECK BOX
WHEN DESCRIPTION = 'CAPTURED' and 'APPROVED' - THEN when the captured data are currently it should display approved
Where description = 'CAPTURED or APPROVED' then 'approved' - when the data "CAPTURED or APPROVED" is present then display approved
When the description not in ("CAPTURED", "NO CAPTURE", "APPROVE") then 'rejected' - not in all these 3 data and then display rejected
) alias_name
END
OF PAYLOG;
Now, I want to apply the same logic to query below
with the temp as
(
Select
(CASE
DESCRIPTION = "NOT CAPTURED" THEN "rejected by the question.
DESCRIPTION = "CAPTURED or APPROVED" then "APPROVED."
WHEN NOT IN DESCRIPTION ("CAPTURED", "CAPTURED", "APPROVE") THEN 'OTHERS '.
)
snapshot_detail,
Count (*) NTC, sum (payment_amnt) total
of PAYLOG
)
Select snapshot_detail, sum (NTC) TOTAL_COUNT, sum (total) TOTAL_VALUE, round ((sum (NTC) / sum (NTC) over()) * 100.2) PERCENTAGE
temp
Group total, snapshot_detail, cnt
Union of all the
Select 'Total', sum (cnt), sum (total) TOTAL_VALUE, round ((sum (NTC) / sum (cnt)) * 100.2)
temp
Please help experts.
What of this
with temp as ( select snapshot_detail, sum(cnt) cnt , sum(total) total from ( select CASE WHEN DESCRIPTION = 'NOT CAPTURED' THEN 'Rejected by Issue' when DESCRIPTION = 'CAPTURED' or DESCRIPTION='APPROVED' THEN 'APPROVED' ----------------------------i want only one condition to be satisfied here WHEN DESCRIPTION NOT IN ('NOT CAPTURED','CAPTURED','APPROVED')THEN 'OTHERS' end snapshot_detail, count(*) cnt, sum(payment_amnt) total from paylog group by description ) group by snapshot_detail ) select snapshot_detail, sum(cnt) TOTAL_COUNT,sum(total) TOTAL_VALUE ,round((sum(cnt) / sum(cnt) over()) *100,2) PERCENTAGE from temp group by snapshot_detail ,total,cnt union all select 'Total', sum(cnt), sum(total) TOTAL_VALUE,round((sum(cnt) / sum(cnt)) *100,2) from temp;
-
How to use the instruction box in where clause
Hi all
I need to use cases where clause guide me please how I can do it.
AND WHEN BOX: KAPCO = "KAPCO" THEN cla. CLASS_NAME LIKE '% KAPCO % '.
WHEN: KAPCO = "NON_KAPCO" THEN SUPERIOR (cla. CLASS_NAME) NOT LIKE '% KAPCO % '.
WHEN: KAPCO = 'ALL' GOLD: KAPCO IS NULL SO SUPERIOR (cla. CLASS_NAME) LIKE '% '.
END
Concerning
Published by: user10941925 on March 4, 2012 22:31Hello
CASE expressions return a single value, for example a VARCHAR2. They do refer to code fragments.
You usually don't need (or want) an expression BOX in a WHERE clause, or any other condition. I think that you were trying to do the equivalent of:
AND ( (:KAPCO = 'KAPCO' AND cla.CLASS_NAME LIKE '%KAPCO%') -- Don't you want UPPER on this line? OR (:KAPCO = 'NON_KAPCO' AND UPPER(cla.CLASS_NAME) NOT LIKE '%KAPCO%') OR (NVL (:KAPCO, 'ALL') = 'ALL' AND cla.CLASS_NAME IS NOT NULL) )
If you would care to post some sample data (CREATE TABLE and INSERT statements) and the results desired from this data, I was able to test this.
-
How to select something in a statement in pl/sql block box in a variable plsql?
It returns the error ORA-00903 invalid tablename.I have to use sql to perform this validation
Why? In your first post you talked about"a pl/sql block '?
In any case - performs the following work for you:
SQL> declare d1 date := sysdate; d2 date := sysdate; d3 date := sysdate; d4 date := sysdate; myvavar varchar2 (1); begin select case when extract (year from d1) != 0000 and d1 < d2 then 'X' when (extract (year from d3) != 0000) and (d3 > d2) then 'X' when (extract (year from d4) != 0000) and (d2 < d3) then 'X' else 'y' end into myvavar from dual; dbms_output.put_line (myvavar); end; / y PL/SQL procedure successfully completed.
?
-
Hi - I have a form that contains a table and inside the table is a column with boxes in it for the contractor to choose whether it's a "subcontractor to the subcontractor," a column description, then a column Original amount of $ and Final amount column paid $. At the bottom of the page, it adds up to the $ initial amount and the Final amount. I need to put a javascript in there so that if a contractor clicks on the checkbox for the subcontractor to subcontractor, the amount that they put in the column Original amount of $ and the Final amount column paid $ not added in the totals for these two columns. Does anyone know how to write a script for this?
Thank you
Connie
Hi Connie,
Here is the form to the you: https://acrobat.com/#d= * XozdxKbYnmCkRiE4iGWBQ.
It have the JavaScript code following in the calculate of the total fields event:
// set up a variable var vTotal = 0; // resolve the row objects in the table xfa.resolveNode("Row1[0].WorkPerformed") var nSub = OriginalAmountTotal.resolveNodes("Row1[*].SubtoSubCheckbox"); var nAmount = OriginalAmountTotal.resolveNodes("Row1[*].num_FinalAmountPaid"); // set up a loop to go through the repeating rows for (var i=0; i
Hope that helps,
Niall
-
Missing keyword in the instruction box
Hello
I get a keyword missing in my case statement that I wondered if I could pick up your brain.
case when IDENTITY_CODE = 9777 then case when bas1_gl_adj_id='STD UNREALIZED GAIN /LOSS RECLASS-REVERSAL' or bas1_gl_adj_id like 'Offset%' then 2 when bas1_gl_adj_id='STD UNREALIZED GAIN/LOSS RECLASS-ADD BACK' then 3 else 1 end as REC_NO else case when bas1_gl_adj_id='IP UNREALIZED GAIN RECLASS-REVERSAL' or bas1_gl_adj_id like 'Offset%' then 2 when bas1_gl_adj_id='IP UNREALIZED GAIN RECLASS-ADD BACK' then 3 else 1 end as REC_NO,
See below the strike through you have not need it as you miss END below
-case when IDENTITY_CODE = 9777
then
-case when bas1_gl_adj_id = "GAIN /LOSS not MATERIALISE STD RECLASS-INVERSION" or bas1_gl_adj_id as 'Offset %' then 2
When bas1_gl_adj_id = 'RECLASS-ADD of STD GAIN/LOSS on CASH BACK' then 3 end otherwise 1 - as REC_NO
on the other
-case when bas1_gl_adj_id = "IP GAIN not MATERIALISE RECLASS-INVERSION" or bas1_gl_adj_id as 'Offset %' then 2
When bas1_gl_adj_id = 'IP GAIN not MATERIALIZED RECLASS - ADD BACK' then 3 or 1 end
END-> you miss it
as REC_NO
-
DEFAULT CONSTRAINT with the INSTRUCTION BOX - Oracle 11.2.0.3
Is it possible to create a default constraint on a table based on conditional logic.
For example:
CREATE TABLE TEST_T (NUMBER OF DEPT_NO,
GRANT_FL CHAR (1)
);
GRANT_FL DEPT_NO
10 Y
10 Y
0 N
I want the DEPT_NO to be filled with a default value of 10 only when GRANT_FL = 'Y' otherwise the value to 0.
I can do that with an after Insert trigger, but would be better if this can be done via the case statement that sets a default value.
Thank you very much!
Kevin
Hi, Kevin,
Sorry, I don't think that there is a way to do it with the DEFAULT options.
Kevin_K wrote:
... I can do this with an after Insert trigger...
I think that a trigger is your best bet, but a BEFORE INSERT trigger would be much simpler and more effective? An INSTEAD OF trigger is another possibility.
-
update with the instruction box
Hello
I need to do something like this:
update my_table set (prelucrat, err) = (select case when r.id is not null then ('D', null) else ('N', 'Nu exista persoana cu marca '||r.marca) ) where marca = r.marca and ctiserver = r.ctiserver
But I got an error 'missing right parenthesis.
'r' is a cursor variable, so this update is nested in one 'for r in (...) ". loop. "
What I am doing wrong? Is it possible to update both the two columns, then select in this use case?
Thank you.
for r in loop (select...)
Update my_table
Set prelucrat = nvl2(r.id,'D','N')
, err = nvl2 (r.id, null, 'Nu exista person cu marca' | r.marca)
where marca = r.marca
and ctiserver = r.ctiserver;
end loop;
----
Ramin Hashimzade
-
Calculation of measurement using the division and the instruction box
Hello Experts
I have a measure that calculates the percent of sales by State - "sale by States" / "Total sales" * 100 and the requirement is when the numerator of the measure is < 11 then it should be set to 0. I tried to write a next case statement case when sales by State < 11 THEN 0 ELSE sales by State / "Total sales" * 100. I get an error of syntax ideas how I can make it work.
Thank you
RCRC,
It is always useful in the forum when you post your code and the associated error. Of what you provided; It seems that your case statement is missing from the end clause and it should look like this:
SELECT CASE WHEN sales_per_state < 11 THEN 0 ELSE sales_per_state / "Total Sales" * 100 END FROM your_table
Jeff
-
using the function min() inside the instruction box
I have a problem with the following select statement
Select
patient_id
, sum (case when ch.cancer_site_id in ('3', ' 39 ', ' 12') and min (ch.diagnosis_age) < 40 0' then '1' other ' end) in breast cancer
Of...
Patient_id group
I get an error "not a single group group function.
The main table, that I work with is so implemented.
PatientID | diagnosis_age | cancer_site_id
12345678 | 35. 4
12345678 | 40. 4
12345678 | 42. 12
12345678 | 34. 31
87654321 | 50. 12
cancer_site_ids 4 and 31 must get grouped together and called breast cancer. cancer_site_id 12 (and others) is cancer of the colon.
Finally I need the output to look like this
PatientID | min (breast_diagnosis_age) < 40 | min (breast_diagnosis_age) > 40 | min (colon_diagnosis_age) > 40
-------------------------------------------------------------------------------
12345678 | 1. 0 | 1
87654321 | 0 | 0 | 1
My final request is much more complicated than that, but it's the last part that I can't understand.Hello
Welcome to the forum!
You can use the analytic MIN function to get the earlier diagnosis_age.
Analytical functions are calculated after aggregation functions. If you use the aggregate functions to rotate the data, this means that you need to calculate the minimum age in a subquery and do all aggregates in the main query.
I mean, it is something like this:WITH got_min_diagnosis_age AS ( SELECT patiendid , MIN (diagnosis_age) OVER ( PARTITION BY CASE WHEN cancer_site IN (4, 31) THEN 'breast' WHEN cancer_site IN (3, 12, 39) THEN 'colon' END ) AS diagnosis_age , CASE WHEN cancer_site IN (4, 31) THEN 'breast' WHEN cancer_site IN (3, 12, 39) THEN 'colon' END AS type FROM table_x ) SELECT patientid , COUNT ( CASE WHEN type = 'breast' AND min_diagnosis_age <= 40 THEN 1 END ) AS breast_up_to_40_cnt , COUNT ( CASE WHEN type = 'breast' AND min_diagnosis_age > 40 THEN 1 END ) AS breast_over_40_cnt , COUNT ( CASE WHEN type = 'colon' AND min_diagnosis_age > 40 THEN 1 END ) AS colon_over_40_cnt FROM got_min_diagnosis_age GROUP BY patientid ORDER BY patientid ;
You can also calculate type in a subquery, then use it to calculate the min_diagnosis_age for the type in a second subquery. If the expression to get type is much more complicated in reality that it is in this small sample, which can be better.
Published by: Frank Kulash, November 3, 2010 15:00
You have a cancer_site table, that is, a table that has one line for each valid value of cancer_site (3, 4, 12,...)?
If so, you need to add a column to this table to indicate what kind of cancer, each site is associated. You could join this table in the subquery, rather than using CASE expressions. The fact that 4 of the site is associated with breast cancer is the type of information that belongs to a table, not hardcoded in a query.
If you do not have a cancer_siote table, thus creating one can be a good idea. -
A subquery within the instruction BOX
I try to use a subquery in a Case statement with a condition 'where' that binds at the request of the mother. Like this:
It works for me in SQL Server, but in ORACLE the subquery does not return line, I guess that it is binding to the parent query part. All thoughts in another way, I could get the result I want?Select T.idperson , CASE WHEN T.type = 'C' THEN (SELECT name from Customers where C.idcustomer = T.idperson) ELSE (SELECT name from Providers where idprovider = T.idperson) END Name from myTable T
Thank you
JuanDiegoHi, Juandiego,
If it's not returns all rows, you must have all the lines in the table.
If you have lines in the table, you either get
(a) an error or
(b) some lines (even if the columns are set to NULL).There is another way to get the desired results.
I probably wouldn't use scalar subqueries. I'd do it outer join all the tables, like this:Select T.idperson , CASE WHEN T.type = 'C' THEN c.name ELSE p.name END AS Name from myTable t LEFT OUTER JOIN Customers c ON c.idcustomer = T.idperson LEFT OUTER JOIN Providers p ON p.idprovider = T.idperson ;
-
Using instructions in the queries box, where and how?
I'm writing a query that returns the address fields based on a field type in the address table. There is a hierarchy to the return order, CO 'first, then am', then had '. I had been using left outer joins potentially draw three sets of fields in the database (there is ALWAYS a type D, but not necessarily an M or a CO M) then using if instructions in the program to write the correct address. However, my supervisor wants me to use case statements is to replicate a set of address within the query fields. I am at a total loss. I used the instructions box before, but not on something like that.
Here is the code that I HAD been using:
.
.
.
AD. ADDRESS1,
AD. ADDRESS2,
AD. CITY,
AD. STATE,
AD. ZIP,
AD. NUMBERS1,
MAD. MAILING_ADDRESS1 AS ADDRESS1,
MAD. ADDRESS2 HAVE MAILING_ADDRESS2,
MAD. ACE OF THE CITY MAILING_CITY,
MAD. MAILING_STATE OF THE STATE,
MAD. ZIP AS MAILING_ZIP,
MAD. NUMBERS1 AS MAILING_PHONE1,
CAD. ADDRESS1 HAVE ADDRESS1,
CAD. ADDRESS2 AS ADDRESS2,
CAD. TOWN TO TOWN,
CAD. STATE OF THE STATE,
CAD. ZIP AS ZIP,
CAD. NUMBERS1 AS NUMBERS1,
.
.
.
JOIN EXTERNAL ADDRESS AD LEFT ((M.CONTRACT_NBR = AD. ADDNO)
AND (AD. ADDTYPE = A ')
AND (AD. WHOTYPE = THE OF ')
AND (V_RUNDATE BETWEEN AD. YMDEFF AND AD. YMDEND)
AND (AD. SUB = ' '))
LEFT OUTER JOIN ADDRESS MAD ON ((M.CONTRACT_NBR = MAD. ADDNO)
AND (MAD.) ADDTYPE = AM')
AND (MAD.) WHOTYPE = THE OF ')
AND (V_RUNDATE BETWEEN MAD. YMDEFF AND MAD. YMDEND)
AND (MAD.) SUB = ' '))
JOIN EXTERNAL ADDRESS CAD LEFT ((M.CONTRACT_NBR = CAD. ADDNO)
AND (IE. ADDTYPE = AM CO')
AND (IE. WHOTYPE = THE OF ')
AND (V_RUNDATE CAD. YMDEFF AND CAD. YMDEND)
AND (IE. SUB = ' '))
.
.
.
I'm confused about time how Word instruction box and where to use them, either in the list of selection, or where clause.
NVL seems more appropriate then the case here, you check for NULL values.
I'm assuming you prefer CAD > MAD > AD (if not, then you should be able to edit appropriately).
NVL(CAD.ADDRESS1, NVL(MAD.ADDRESS1, AD.ADDRESS1)) ADDRESS1, NVL(CAD.ADDRESS2, NVL(MAD.ADDRESS2, AD.ADDRESS2)) ADDRESS2, NVL(CAD.CITY, NVL(MAD.CITY, AD.CITY)) CITY, NVL(CAD.STATE, NVL(MAD.STATE, AD.STATE)) STATE, NVL(CAD.ZIP, NVL(MAD.ZIP, AD.ZIP)) ZIP, NVL(CAD.PHONE1, NVL(MAD.PHONE1, AD.PHONE1)) PHONE1
And then you would hold the outer joins. What this will do is:
Use the CAD address if it exists.
If it is not (and therefore is NULL), he would use the address MAD.
If it is also null, it will use the AD address. -
I did something to the internet explorer, so I need to download Firefox, but I can't get the dialog box or instructions on http://www.mozilla.org/en-US/firefox/new/
Help, please!You can find the latest version of Firefox in all languages and for all systems operating here:
- Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Maybe you are looking for
-
How can I check how much storage I have. My Mac said I 7 138 images and videos and said 271 then your Mac storage is fully 472 points to download. How to make I have free storage?
-
Pavilion g6 2320tx: battery problem.
Hi all My battery is getting up to 100%, but its not giving no backup for me. As soon as I remove the charger is it descending liquidated. Should I replace my battery? If so, then where can I get battery authorized hp? Thanks in advance.
-
Hello I received the following error message "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. » This happens when I try to
-
Gadgets not working not not on Win 7 Ultimate x 64
I have 2 PC, 1 is 2 years and 1 that is brand new. Both have Windows 7 Ultimate x 64 on them completely up-to-date, and Desktop Gadgets do not work on either. I went to control panel > programs > Windows features on or off turn on and the Windows G
-
NAT before VPN - ASA L2L 8.3?
Hello I have the following scenario: -. A net - network 172.20.82.0/24 (under my control) B ' net - network audience (beyond my control) I have a lot of servers on the Net (172.20.82.0/24) network I would PAT behind a public IP address before it is s