need help in the instruction box

Similar Questions

• Need help with an instruction box with the data in the collection

  It is located in the section source on my interactive form, my collection process works, but there is "-" where there should be a "$0.00 ' in the summary section.
  
  There is a problem with my syntax of the case statement,
  
  
  Select pending, records c002 c001, c003 case $ if no then ' $0.00 ' if not no c003 end other "$0.00 ' from apex_collections where collection_name ="Summary1»»"

  Hi Doug,.

  The best way to handle this is with the NVL function, for example,

  SELECT c001 Awaiting, c002 Records, NVL(c003,0) Dollars ...
  

  and let the application manage the formatting of the field (which I suppose it's done for non-null values).

  However, if you want to use the CASE statement, here is how it works:

  SELECT CASE WHEN c003 IS NULL THEN 0 ELSE c003 END Dollars ...
  

  -Jennifer

• Distinct count in the instruction box

  -------------------------------------------------------------------------------------------------
  SELECT A.P_ID,
  B.P_NAME,
  C.P_DESC,
  
  SUM (CASE
  WHEN A.DATE BETWEEN TRUNC (ADD_MONTHS (LAST_DAY (SYSDATE),-4) + 1) AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)),-1)
  AND A.M_ID IS NOT NULL
  THEN 1
  0 OTHERWISE
  END) AS COUNT,
  SUM (CASE
  WHEN A.DATE BETWEEN TRUNC (ADD_MONTHS (LAST_DAY (SYSDATE),-4) + 1) AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)),-1)
  AND A.M_ID IS NOT NULL
  THEN COUNT (DISTINCT A.M_ID)
  0 OTHERWISE
  END) AS UNIQUE_COUNT, / * is not possible * /.
  SUM (CASE
  WHEN A.DATE BETWEEN TRUNC(SYSDATE,'YEAR') AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)), - 1).
  THEN A.AMT_1
  0 OTHERWISE
  END) AS TOTAL_AMT_1,
  SUM (CASE
  WHEN A.DATE BETWEEN TRUNC(SYSDATE,'YEAR') AND ADD_MONTHS (LAST_DAY (TO_DATE (SYSDATE)), - 1).
  THEN A.AMT_2
  0 OTHERWISE
  END) AS TOTAL_AMT_2
  
  FROM TABLE_A A,.
  TABLE_B B,.
  C TABLE_C
  
  
  WHERE A.P_ID = B.P_ID
  AND B.PT_ID = C.PT_ID
  A.P_ID GROUP,
  B.P_NAME,
  C.P_DESC
  
  ----------------------------------------------------------------------------------------------------------
  
  Hello
  
  It is a simplified version of my request.
  I'm doing 4 things here,
  1. the County A.M_ID
  2 County has separate .M_ID, is where I have a problem.
  3 and 4. It is just the sum of 2 diff columns.
  
  Note that the dates for the County and the amt are different and I can't hard-code the.
  Can someone help me step of distinct count?
  This query runs also a bit slow.
  So all suggestions, comments are welcome.
  Note: TABLE_A REB 700 million, TABLE_B 4 million and TABLE_c is located only 500 RECS
  Thank you!

  Advantage of the fact that aggregate functions more ignore nulls, you could do something like:

  SELECT a.p_id, b.p_name, c.p_desc,
         COUNT(CASE WHEN a.date BETWEEN TRUNC(ADD_MONTHS(LAST_DAY(sysdate),-4) + 1) AND
                                        ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) AND
                         a.m_id IS NOT NULL THEN m_id END) AS countall,
         COUNT(DISTINCT CASE WHEN a.date BETWEEN TRUNC(ADD_MONTHS(LAST_DAY(sysdate),-4) + 1) AND
                                      ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) AND
                       a.m_id IS NOT NULL THEN a.m_id END) AS unique_count, /* entirely possible */
         SUM(CASE WHEN a.date BETWEEN TRUNC(sysdate,'YEAR') AND
                                      ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) THEN a.amt_1
                  ELSE 0 END) AS total_amt_1,
         SUM(CASE WHEN A.DATE BETWEEN TRUNC(sysdate,'YEAR') AND
                                      ADD_MONTHS(LAST_DAY(TO_DATE(sysdate)),-1) THEN A.AMT_2
                  ELSE 0 END) AS TOTAL_AMT_2
  FROM table_a a, table_b b, table_c c
  WHERE a.p_id = b.p_id and
        b.pt_id = c.pt_id
  GROUP BY a.p_id, b.p_name, c.p_desc
  

  The two statements inside the COUNTY box return a.m_id or NULL. A simplified test case is:

  SQL> WITH t as (
    2     SELECT 1 m_id, 9 dt FROM dual UNION ALL
    3     SELECT 1 m_id, 6 dt FROM dual UNION ALL
    4     SELECT 2 m_id, 9 dt FROM dual UNION ALL
    5     SELECT 2 m_id, 6 dt FROM dual UNION ALL
    6     SELECT 1 m_id, 5 dt FROM dual UNION ALL
    7     SELECT 2 m_id, 5 dt FROM dual UNION ALL
    8     SELECT null m_id, 9 dt FROM dual)
    9  SELECT count(CASE WHEN dt BETWEEN 6 and 9 THEN m_id end) cid,
   10         count(distinct CASE WHEN dt BETWEEN 6 and 9 THEN m_id end) cdid
   11  FROM t;
  
         CID       CDID
  ---------- ----------
           4          2
  

  I'm not entirely sure that you really need the IS NOT NULL predicate a.m_id in the instructions BOX, but I left it for more security.
  John

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with the verification of the student

  My daughter bought Adobe Acrobat Pro XI on new Amazon and then we followed the directions on Adobe to verify she is a student at the high school.  It's been 3 days and we still have not received the activation code to use our product?  Adobe support is horrible (I was on the phone for hours without that person never responding) and there is nowhere to present a plane ticket.

  Unfortunately it is in the forums that can do a lot for help you, since most of us are users of products like your daughter, and no employee here don't have much ability to deal with what anyone on your behalf beyond possibly check status.

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  Another good resource for information is the student and teacher edition information forum:

  http://forums.Adobe.com/community/download_install_setup/student_and_teacher_edition_infor mation_? view = discussions

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Problem with variable referencing of presentation (KEY Date) in the instruction box

  Hello
  
  I'm trying to reference variables of presentation created on a Date column in the instruction box to one of the columns in the query, as shown below:
  
  -case when '-citation details. "" "Created" between ' @{of} {1999-1-1}' and ' @{until} {2999-1-1} "then"-quote Metrics. " "" end of number of citations.
  
  I m getting a view displays error message with the following error message:
  
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 17001] Oracle error code: 1861, message: ORA-01861: literal does not match the format string to the call of the OIC OCIStmtExecute
  
  SQL issued: SELECT "-quote Types '." Name of level 2 Saw_0', case when '-citation details. "" Created "between" 01/04/2009 ' and ' 15 / 04/2009 ' then '-quote Metrics ' "." number of citations"end saw_1"(unit) - CATALOGUE of quotes"WHERE"-citation details "". "" Date of creation"BETWEEN timestamp ' 2009-04-01 00:00:00 ' timestamp AND ' 2009-04-15 00:00:00 ' ORDER BY saw_0
  
  
  When I created the prompt on the date field, I put the following in the command prompt:
  Cast ("-time".) Day)
  
  When I apply a filter on the query using these variables, it works fine.
  
  If anyone has faced this kind of question earlier and have a resolution, please help me.
  
  Thank you
  Kitenge

  Hello.

  Select the double - A NON-VALIDE MONTHS TO_DATE('1999-1-1','mm/dd/yyyy')

  Try this:

  OLD: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {1999-1-1} ", mm/dd/yyyy)
  NEW: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {01/01/1999} ", mm/dd/yyyy)

  and

  OLD: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {2999-1-1} ", mm/dd/yyyy)
  NEW: EVALUATE ('TO_DATE (%1, %2)', ' @{of} {1, 1, 2999} ", mm/dd/yyyy)

  and if not ok after that, after an error in query SQL of NQQuery.log.

  Kind regards

  Goran Ocko

  http://108obiee.blogspot.com/

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Satellite Pro A300-15V, I need help in the Organization of my startup list

  Hello everyone!

  I need help in the Organization of my startup list:

  (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
  TOSHIBA Power Saver
  Toshiba Flash Cards
  RAID event monitor

  So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

  Thanks a lot for your time!

  Kind regards
  Osman.

  My laptop:

  Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

  > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
  You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

  > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
  I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

  > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
  I think that this is necessary. It could improve your audio

  > Toshiba Power Saver
  This is important. It s an additional saving of Toshiba option for Win 7

  > Toshiba Flash Cards
  This tool controls the FN keys.

  > RAID Event Monitor
  Hmm so you don t have two hard disks, then you can try to disable it too.

• I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock.  Photos will read the iPhoto library and create a new library of pictures of him.

  Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system.  If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I need help for the upgrade of my current system.

  I need help for the upgrade of my current system.

  I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

  I want to make the larger environment using the following:

  (1) apply Virtualization

  (2) apply to the failover process (clustering)

  "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

  Storage 4) that supports Raid (1 and 5)

  UTM excellent 6) that supports (SSL VPN, VPN Global)

  suitable backup solution 7)

  (8) good antivirus for clients

  my questions:

  (1) can you provide me with a good design for this environment

  (2) should I choose what operating system:

  Microsoft datacenter or company

  I know datacenter provide us the unlimited VM but needs per processor license

  so if I have two Grouped servers I want to buy 4 licenses

  and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

  (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

  (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

  (5) what about win2k8 license for VM:

  lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

  (6) can I use backExec license for SBS with windows 2008 standard

  (7) who better to virtualization AMD or INTEL

  (8) hyper V or VMware?

  (9) what of Microsoft data protection Manager... is this good?

  (10) what virtual machine manager? What are the benefites keys

  Thanks in advance

  Hello AnasAI,

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/