Envy 17: Controller driver of storage for disk SATA 4 to

Similar Questions

• What SATA controller driver is necessary for Win XP on Satellite L300 BRAND

  Hello

  I need to get rid of vista on my new laptop preinstalled and was going to put Win XP. Of course, Win XP doesn't have SATA support. I've read on how to do (i.e. nlite drivers during the installation of Win XP disk in some way), but I could not find the drivers for it on the web page of Toshiba. Could someone please help and point me to the correct driver for this machine?

  Thank you very much in advance,

  What you need is the Intel Storage Manager.
  The European Toshiba page provides this crib of storage, but you can also download it from the page of Intel. Simply search for Intel Matrix Storage Manager.

  The package contains files different and different SATA drivers for different chipsets.

  Check it out I m that the Storage Manager is the key ;)

  Good bye

• Satellite P300D-h-13 - need Mass Storage Controller driver for Vista 64 bit

  Hello!
  My cake for laptop with 32-bit Vista preinstalled. But since it has 4 GB of RAM and 64-bit pprocessor I bought Vista 64.
  I installed and configured everything except Mass Storage Controller. I don't know if it's for the SATA controller or something else?

  Kind regards
  Sasa

  Hello

  I guess the mass storage controller is the same as Intel Matrix Storage Manager and it contains the SATA drivers.

  You can find it on the Intel page!

  Simply search on the Intel page and you should find the necessary driver!

  Good bye

• X 250 additional storage drive? Hello! Is it possible to have an another disk storage for X 250?

  X 250 additional storage drive?

  Hello! Is it possible to have an another disk storage for X 250?

  Hello

  "I just got a X 250 myself and am currently play with using an SSD of m2 (2242 size, it's a little smaller than an mSATA SSD) and a"regular 7 mm of height"2.5" SSD in as well.

  Kind regards

  Aryeh Goretsky

• HP Envy h8 desktop computer - 1440t: storage drive and graphics card upgrade

  I bought my desire Desktop 3 years at hp store. Now, I would spend my disk storage and the graphics card because I wanto to speed up my computer and also I bought and new screen (screen 32 inch HP ENVY with Beats Audio Media) which has displayport but my graphics card is not.

  My office has:

  -First HDD: 1 TB, 7200 RPM, SATA
  -Secondary hard drive: 1 TB, 7200 RPM, SATA
  -Graphics card: GeForce GT 640 (3 GB)

  -Power supply: 460w

  And I want to upgrade those parts for:

  -Hard primary: 960 GB HyperX SAVAGE SSD SATA 3 2.5 (7mm height)

  -Graphics card: one of them

  * NVIDIA GeForce GTX 660 2GB GDDR5 PCI Express 3.0 Graphics

  Card TF N660 2GD5/OC (first choice)

  * GeForce GTX 680 (2 GB)
  -Power: 600w

  But I don't know if it is possible to do the update.
  Can someone help me with this?
  
  Product name: HP Envy h8 desktop computer - 1440t
  
  Product number: C1U78AV #ABA
  
  OS: 8.1 Pro 64 bit Windows

  JoBla, welcome to the forum.

  It is becoming increasingly difficult to ensure that the latest components will work in an old computer.  Your computer is almost 3 years old.  My suggestion is to choose the SSD and the video card you want to buy and contact the Technical Support of the manufacturer to determine if it will work with your computer.  They are the experts on their products.  This will save you the possibility to pay for the return of one of them.  That's what I did and it works fine.

  I can recommend a PSU 600W (PSU), however.  I love Corsair products.  Here is a very good power supply.  Read the reviews to see what users have to say about it.  There is a modular version of it, too.  The modular power supply is good for medium-sized cases.  It allows you to use only the cables that are absolutely necessary.  Which makes for airflow and better cable management.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Lack of controller driver PCI Communications Simple - Windows 8 x 64 - HP ENVY 15 t-j000 Quad Edition

  I downloaded and installed all the drivers for my product - HP ENVY 15 t-j000 Quad Edition (E4T17AV) - and it still shows a lack of PCI Simple Communications Controller Driver. Can someone point me in the right direction please?

  Is the hardware ID

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
  PCI\VEN_8086 & DEV_8C3A & CC_078000
  PCI\VEN_8086 & DEV_8C3A & CC_0780

  Nope.

  That is probably why it is not installing.

  The driver is designed for RAID configurations.

  I know it does not install not in IDE mode, but I wasn't sure of the AHCI mode.

  If you want the latest AHCI driver for your configuration, you can get it directly from Intel on the link below.

  The first file listed.

  Download and unzip it into a folder.  Do the manual update method by going to Device Manager, and then click to expand the IDE ATA/ATAPI controllers category.  Click the listed SATA AHCI controller.  Click on the driver tab, click on put up-to-date driver, reselect the thing browse and navigate to the folder that you extracted the drivers to.

  Make sure that the include subfolders is selected and should install the updated driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Satellite Pro P300: Need driver "Mass storage controller" of Vista 64-bit

  Hi, please help.

  I just upgraded my laptop from Windows Vista 32 bit Vista 64-bit.

  I managed to find all the drivers apart: the driver "Mass storage controller" (yellow exclamation in Device Manager).

  I don't know where to look for this driver.

  Any help would be appreciated. Al

  Hello

  I guess you didn't search in the forum for similar issues? Is this good?
  I think that I m straight because I searched the forum and found that Toshiba FAQ doc.

  + No driver Windows XP for PCI Memory Controller +.
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  Here you can find this text passage:
  After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * "Mass storage controller" * in Device Manager.

  _Solution: _
  This unit is probably the module of Robson former Turbo Memory.
  This material will be supported only by Windows Vista.
  There is therefore no Windows XP driver.

  Now, everything should be clear ;)

• Satellite A100-294 - need mass storage controller driver

  Dear all.

  Where I can download: controller driver for mass storage for notebook Tosiba Satellite model A100-294:
  Reference number: PSAA8E-02T014GR

  Please help me.
  Sunny
  \

  You need this driver for Windows XP or Windows Vista?
  Why should you get this driver? You have no yellow exclamation point in Device Manager?

• need driver or app for ' beats audio control center "for HP Envy 14 1110nr

  Hi all

  I have a HP Envy 14 model 1110nr. A while back I reformatted my computer and I tried to restore it to its 'presets' and something went wrong during the format. So I tried to use my recovery disks that I had done and for some reason whenever I got to the last disk as 86% done I would get an error and the installation from the recovery discs would not work.

  For awhile, I thought maybe that could drive was bad, but after much research, I saw that a few people with my laptop even "HP Envy 14" had exactly the same problem in trying to use their recovery disks. If a guy said that he solved the problem by downloading Windows 7 64 bit and fresh install of iso of windows 7. So I did and it was working fine, and now I have my laptop works very well. One thing however that I do not have the Beats Audio Control center app came with my laptop. I tried to look on the official site of HP drivers however I can't find anything that has to do with «Beats Audio»

  Did someone here knows where I can download either the driver for the "centre of control audio beats" or application if a driver is not required?

  I would like to get the app to control audio specific beats for my laptop-> "HP Envy 14 1110nr".

  If anyone can point me in the right direction, I would great appreciate it...

  Thank you all for your time and your help.

  Here are the specifications of your HP ENVY 14-1110nr laptop computer. Here are 14-1110nr HP the HP Software Driver Downloads page . The original IDT Audio driver is available for download on this page. A newer version is available HERE. The new version contains the control user interface updates audio Beats and audio enhancement.

  Please click the White Star of KUDOS to show your appreciation

• driver of bus controller universal series (USB) for my Pavilion 15-n240ee win 7(64bit)

  Hello

  Please I need the driver (USB) universal serial bus controller for my Pavilion 15-n240ee win 7(64bit)

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C & REV_04
  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C
  PCI\VEN_8086 & DEV_9C31 & CC_0C0330
  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  thanx

  Please use the provided HP Intel USB 3.0 host controller driver from the page of drivers of Quad Edition CTO Notebook PC HP ENVY 15 t-j100. Most of the Windows 7 drivers on this page should work on your computer. DOES NOT allow to download and use any BIOS or firmware from this page.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Vista does not recognize the mass storage controller driver

  How can I get microsoft to recognize their own software and files show as my controller driver of mass in diagnostic checks and updates storage?

  * original title - BUG not installed mass storage controller driver *.

  I don't really understand your question. The mass storage controller driver is available from the website of your computer mftr. (if you have a machine of brand OEM like HP, Dell, etc.) and is included in the card mother/chipset drivers OR you would get the driver from site of the card mother mftr. If you have a generic construction machine. You don't want to update these drivers from Microsoft Windows Update in all cases. If you installed Windows 7 and that you have not installed these drivers, this is your next step.

  General information on the drivers:

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• E520 - driver Intel SATA AHCI Controller driver for Windows 7 (64-bit)

  Hi guys, can I apply for assistance with Intel SATA controller AHCI Driver for Windows 7 (64-bit), please? I went to the drivers download page and I chose my laptop (ThinkPad Edge E520 1143 - 37G), then the pilot of storage, but when I click on Intel SATA AHCI Controller driver for Windows 7 (64 bit) nothing happens. 32-bit is available for download tho. Thx a lot for suspicion

  Hi trueblue666,

  I sent lenovo feedback to his subject, the driver must appear on the next page once that they fix it:- http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-74273

  I hope this helps.

• Mass storage controller driver installation problem

  Hi my computer is Sony Vaio VGN-NR38M/S and I installed a new copy of windows 7 Home premium 32-bit (no update for vista) but it me in the Device Manager shows Mass Storage Controller driver error even I tried to install windows update but nothing if someone could tell me where I can get the drivers for it and install it

  thanx

  Hello

  Contact the manufacturer of the computer, and try to get the downloaded drivers.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=24&NAVDISP=PC

  Also check the link mentioned below as a reference.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information helps.

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for HP Pavilion Elite e9140f

  Hi, I added a second hardrive that is 3 TB and my desktop is running windows 7 with SP 1.  I have been informed by Acronis technical support I need to get an NVIDIA nForce Serial ATA Controller update (I have version

  NVIDIA nForce Serial ATA Controller version 11.1.0.29 installed).  Can someone tell me what version I need update too and where to download?  Thank you!  Mark

  The last driver from Chipset from nVidia for your computer is located on the nForce Chipset Driver Version 15.56 download page. This driver install NVIDIA nForce Serial ATA Controller driver v11.1.0.43. This driver, however, isn't likely to solve your problem.

  You will need to check that the hard drive is seen in BIOS until the computer will recognize the drive. You will need to run the Windows 'Disk management' console to partition the hard drive in at least two partitions, MBR or GPT partition before you can use the drive.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation