Looking for a NVIDIA nForce Serial ATA Controller Driver Update for HP Pavilion Elite e9140f

Hi, I added a second hardrive that is 3 TB and my desktop is running windows 7 with SP 1.  I have been informed by Acronis technical support I need to get an NVIDIA nForce Serial ATA Controller update (I have version

NVIDIA nForce Serial ATA Controller version 11.1.0.29 installed).  Can someone tell me what version I need update too and where to download?  Thank you!  Mark

The last driver from Chipset from nVidia for your computer is located on the nForce Chipset Driver Version 15.56 download page. This driver install NVIDIA nForce Serial ATA Controller driver v11.1.0.43. This driver, however, isn't likely to solve your problem.

You will need to check that the hard drive is seen in BIOS until the computer will recognize the drive. You will need to run the Windows 'Disk management' console to partition the hard drive in at least two partitions, MBR or GPT partition before you can use the drive.

If you have any other questions, feel free to ask.

Please click the White Star of KUDOS to show your appreciation

Tags: HP Desktops

Similar Questions

  • Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

    Hello

    The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

    Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

    Windows Vista/Win7 32-bit driver v15.49

    Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

    Driver Ethernet (v73.14 +) WHQL

    (V73.16) network management tools "Sedona".

    SATAIDE (v11.1.0.33) WHQL driver

    SATARAID Driver (v11.1.0.33) WHQL

    Application RAIDTOOL (v11.1.0.30)

    SMBUS (v4.74) WHQL driver

    SMU (v1.71) WHQL driver

    GPU (v190.38) WHQL driver

    PhysX (v9.09.0428)

    Away Mode Driver (v6.0.6000.114) WHQL

    Installer (v7.57)

  • NVIDIA nForce Serial ATA Controller can not be updated

    For some reason any when I try to update my NVIDIA nForce Serial ATA Controller to the latest version, windows would say it was up-to-date. I had updated this because one of my programs say it is outdated and the latest version is 11.1.0.43 (9 April 2010) and my current version is 11.1.0.33 (August 4, 2009).

    Driver date: 04/08/2009
    Driver version: 11.1.0.33

    Is there a way to update this? I tried searching on Google, but I've never seen all the downloads from the NVIDIA site. Help, please. Thank you.

    Driver version: 11.1.0.43

    (Select the supported operating system: 32-bit or 64-Bit version for Windows Vista, Windows 7, Windows 8)

    http://www.driverscape.com/download/NVIDIA-nForce-serial-ATA-controller

    J W Stuart: http://www.pagestart.com

  • NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

    NVIDIA nForce Serial ATA Controller has a problem driver ID: ROOT\UNKNOWN\0000 error code: 10

    Hi JimmyGoings,
     
    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
     
    In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
     
    You can follow the steps in the article given below to resolve the problem.
     
    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104
     
    Check to make sure that the controller is enabled in the BIOS, if there is physical damage to a motherboard, it is usually fatal.
    In addition, go to the nvidia /drivers and automatically search the chipset drivers and install it.
     
    Warning of the BIOS:
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • NVIDIA nforce serial ATA controller

    Hello

    I am trying to download this driver and having problems. I have a dv6408 of Pavilion with 64-bit Windows 7 system

    Can someone help me?

    Thank you

    karp57

    Hello:

    The 64 bit Vista driver should work for you.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51679-1&CC=US&DLC=en&LC=en&os=2100&Product=3457732&sw_lang=

    Paul

  • Charger for HP Pavilion Elite e9140f 9V power

    Hello

    I have a HP Pavilion Elite e9140f desktop computer. The power supply fan makes little noise. I would like to replace his power.

    What are the replacements recommended for this?

    Thank you!

    MKG

    The fan down, not more. It will pull the Cabinet and out the back.

  • ThinkPad Serial ATA Hard Drive Bay fit III 43N3412 for T61

    Anyone know if this adapter works for T61?

    So far I couldn't find this "40Y8725 ThinkPad Serial ATA Hard Drive Bay Adapter" on the site that says work for T61.  But I thought Ultrabay options are supposed to be interchangeable? I hope that this is the case.

    I prefer to buy the newer model if it is compatible for the T61.

    It's one of the T61. Ultrabay slim housing uses a PATA connectio to the motherboard of the laptop, so the adapter you buy contains a SATA to PATA chip to allow you to use a SATA hard drive.

    While the new thinkpads, T400, T500, R400, R500, X 200, W500 all use a SATA connection on the motherboard of the laptop, so the device ultrabay for previous machines are not physically compatible. This move is due to the need to allow full support SATAII.

  • I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?

    I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?  Somewhere in the 320 to 500 GB range and I want a quick unit because it will be used for rendering videos.    Thank you for your response.

    Hello

    How fast is fast is the real question.

    Have you looked at hybrid drives OCZ? Expensive but probably the fastest option.

    Seagate also made a hybrid hard drive.  Good price... You will need a 3.5 "to 2.5" support if the player does not support.  If you install the drive in an empty optical Bay then you will need a 5.25 "to 2.5" support.

    Your other choice is 7 200 or 10 000 rpm traditional hard drives.

    Another option would be to add a PCI sata and two external hard dirves configured in RAID 0.

  • Power for desktop Pavilion Elite HPE 550f.

    I want to know if the power supply for the Pavilion Elite HPE 550f active or passive PFC. the specs online say: 460 watts, PFC power adapter. I was not able to find whether it is active or passive.

    Thank you!

    Hello

    He is ACTIVE.  Delta made power supply HP 460 watt (Bordeaux). DPS 460 DB3 - A

    This article will give you an explanation of the difference between assets and liabilities.

  • HP Pavilion a6142n, 32-bit PC: need to update for Nvidia nForce 10/100 Ethernet Driver Version 67.8.9.0.

    I upgraded Windows Vista 32 bit Windows 7 32 bit and the report Upgrade Advisor says I have the Nvidia nForce 10/100 Mbps Ethernet.  The recomomended action is before installing Windows 7, go to the manufacturer's Web site to download the latest dirver for this device.  After I installed Windows 7, install the registered driver.

    I had no luck locating it on the Nvidia site, so any help in the search, it would be greatly appreciated.

    Thank you

    Hello:

    You need this driver...

    http://www.nvidia.com/download/driverResults.aspx/14874/en-us

  • HP Pavilion a6540in: I can't find an update for NVIDIA nForce 10/100 Ethernet Driver Version

    • I'm upgrading from Windows Vista to Windows 7 and Upgrade Advisor says that NVIDIA nForce 10/100 Ethernet requires the latest version of the driver. The current driver is 67.8.9.0
    • I can't find the detected on the NVIDIA site! It is the only action mentions Advisor.

    Hello:

    This is the 32-bit driver...

    http://www.nvidia.com/download/driverResults.aspx/30521/en-us

  • Pavilion 15-e050sa: (USB) on the laptop missing Universal Serial Bus controller driver.

    I just reinstalled windows and I'm looking for the missing driver for my Pavilion 15, the hardware for the missing driver ID is:

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C & REV_04
    PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C
    PCI\VEN_8086 & DEV_1E31 & CC_0C0330
    PCI\VEN_8086 & DEV_1E31 & CC_0C03

    and it's for (USB) Universal Serial Bus controller, I tried to install the Intel USB 3.0 Host controller driver, but will not install and don't know if it's the correct driver. Would be grateful if someone could lead me to the correct driver.

    Thank you.

    Hello:

    Download, unzip and run the file setup.exe from the link below...

    https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  • (usb) universal serial bus controller driver

    I'm looking for a compatible Win 7 x 64 driver for my USB controller

    for my pavilion hp audio beats laptop dv6
    Here is the usb id

    PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C & REV_04
    PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C
    PCI\VEN_1033 & DEV_0194 & CC_0C0330
    PCI\VEN_1033 & DEV_0194 & CC_0C03

    and I have an unknown device, I don't know how to install the driver for it

    the ID is:

    ACPI\HPQ0004
    * HPQ0004

    Hello:

    Here are links to the drivers you need.

    USB

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5093394 & sw_lang =

    0004:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  • Pavilion 15-ab066n M5M85EA #ABU: (USB) universal serial bus controller driver

    Hello

    I just installed windows 7 on my laptop Pavilion 15-ab066n, it came with windows 8. I have difficulties to find universal serial (USB) bus driver and there are also two unknown devices, I was on the site of HP driver and there is not a link for the driver for the chipset. Please someone know where I can find this driver or what the chipset is if I can get it directly from intel? or what are the two unknown devices, they are not player card or bluetooth as I installed the drivers for the HP site.

    Any help gratefully received.

    You are the very welcome.

    Try these...

    This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

    File name: sp71393.exe

    The second driver is directly from the assistance of your notebook page and this is certainly one you need for the device 6007.

    Try to install manually as follows...

    Go to Device Manager and click on the unknown device of 6007 requiring the driver.

    Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp71811.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

    Then restart.

  • The Ethernet Controller driver update

    Good evening

    I would like to know if there is an update for the Ethernet controllers, I installed in my system, but I don't know where to look for them. I checked this link http://downloads.vmware.com/d/details/esx40/ZHcqYmRkd3BidGR3#drivers_tools

    but I can't find the model Intel or whatever related to nVidia. Does anyone know if there is a compatible model Intel one?

    Here are the outputs of some commands that might help me help you:

    [[email protected] ~] # vmware - v

    VMware ESX 4.0.0 build-171294

    [[email protected] ~] # lspci | Net grep

    00:0 a. 0 Bridge: nVidia Corporation nVidia NForce Network Controller (rev a3)

    80:0 a. 0 Bridge: nVidia Corporation nVidia NForce Network Controller (rev a3)

    [[email protected] ~] # lspci | net grep
    86:01.0 Ethernet controller: Intel Corporation 82546EB controller Gigabit Ethernet (copper) (rev 03)
    86:01.1 Ethernet controller: Intel Corporation 82546EB controller Gigabit Ethernet (copper) (rev 03)
    [[email protected] ~] # esxcfg - NICS - l
    Name PCI Driver link speed Duplex MAC address MTU Description
    00:0 a vmnic0. 00 forcedeth Up 1000Mbps Full 00:14:4f:d2:4 d: 60 1500 nVidia Corporation nVidia NForce Network Controller
    vmnic1 80:0 a. 00 forcedeth Up 1000Mbps Full 00:14:4f:d2:4 d: 61 1500 nVidia Corporation nVidia NForce Network Controller
    vmnic2 e1000 up to 1000Mbps Full 00:14:4f:d2:4 d 86:01.00: 62 1500 Intel Corporation PRO/1000 MT Dual Port Server Adapter
    e1000 86:01.01 vmnic3 low 0Mbps half 00:14:4f:d2:4 d: 63 1500 Intel Corporation PRO/1000 MT Dual Port Server Adapter

    Any help would be greatly appreciated.

    Kind regards...

    Welcome to communities

    Driver updates are usually found in ESX (i) patches. Drivers are made available for the material that is released after the ESX(I) release or a particular patch level but should normally be included in the next update. Is there a reason that you need to update the drivers outside the normal correction.

Maybe you are looking for

  • Dark theme of photos app

    I can't yet use the Photos App on my Mac because the theme/skin is way too bright.  Pictures is the image editor only "big" on the market that is limited to a white skin - which, on a 27 "display is blinding.  This is a big reason why I switched to t

  • Satellite C55 - A - 1 M 7, a backlit keyboard?

    Hellolaptop model satellite: Satellite C55 - A - 1 M 7 features a backlit keyboard?

  • IP address problem

    Hello again, Hello again, Well, I could put everything up with linksys tech people but unfortunately I am not able to connect to the outside of my home monitoring system. I subscribed to TZO.COM and used their support troubleshooting to solve my prob

  • Why my computer does not freeze if online or offline?

    I can play solitaire and it will freeze in the middle of the game. I'll be in my email address and it will freeze. I can be offline and going through my photos and it will freeze up.i can be watching a tube in u online and it will freeze. Using anyth

  • BlackBerry 10 Mailto:

    The last couple of days whenever I select a link on a web page e-mail a message asks if I want to connect to PayPal. How can I stop this and set it so it starts the hub?