Envy 17-j034ca: Envy 17

Similar Questions

• laptop Envy 17 17-j034ca: can not detect the usb flash drives

  Hi, I recently installed windows 7 64 bit on my computer laptop envy 17 17-j034ca. Then, I managed to install all the drivers but it still doesn't detect usb flash drives and I tried to install from the web site of HP and my config but it still does not work

  Please help me

  

  It's ok my sound suddenly computer detects the flash drives normally

• driver beats Envy 17 laptop laptop 17-j034ca

  Hello

  I want 17 laptop laptop 17-j034ca with windows 7 Professional 64 bit and I need to get my driver of beats working. I tried to install this high-definition original IDT driver but during the installation, I got this error

  

  Please help I need to get my work audio beats

  Thank you

  Hello LoZito,

  Thanks for posting on the HP Forums!

  Install you the audio driver is for a HP Pavilion desktop computer. It will certainly not work with your computer. However, you may have better luck installing this driver: driver Audio IDT high definition (HD)

  He is out of this product a little more than a month. Please try it and let me know what happens!

  Have a wonderful day!

  Mario

• Windows 7 64 bit drivers for Envy 17 j034ca

  Hi, I recently did a downgrade from win8 to win7 in my Envy17 and I followed the steps in the HP forums thread, but I still have a few problems with some drivers.

  The drivers I know are missing are camera, fingerprint reader, touchpad and usb. But there are probably more...

  I would like to know how can I get a list drivers are missing to give you more information on this subject.

  Thanks a lot for all the help anyone can give me.

  joseMiguel

  Install it from top to bottom

  Firstly uninstall the wrong drivers!

  Install the new F24 BIOS and UEFI must

  Intel Chipset Device Software

  Intel Management Engine Interface (MEI)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117941-1&cc=us&DLC=en&LC=en&OS=4132&product=5400039&sw_lang=

  USB 3.0 Driver: Intel must

  Intel HD Graphics

  Intel Rapid Storage Technology

  Framework of the HP software Must

  HP 3D DriveGuard 6

  ftp://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63020.exe must

  Connection of Smart Intel® technology

  Driver Audio IDT high definition (HD) works with Windows 7

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117354-1&cc=us&DLC=en&LC=en&OS=4132&product=5400039&sw_lang=

  Realtek LAN driver (Local Area Network)

  Bluetooth Ralink software

  RALink 802.11 b/g/n WLAN

  Realtek card reader driver

  HP Quick Launch software

  Synaptics TouchPad

  Validity fingerprint sensor driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117426-1&cc=us&DLC=en&LC=en&OS=4132&product=5400039&sw_lang=

  Application of CyberLink is for Windows 7, 8 and 8.1 and Windows 8 different driver works with 7 (camera)

  HP Support Assistant

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&DLC=en&LC=en...

  Uninstall Nvidia

  Install the new Nvidia

• pictures 1.0.1 quit unexpectedly after printing on HP Envy 5640

  Hello

  I just bought a HP Envy 5640 printer.

  It works very well, but every time I have to print a photo in Photo 1.0.1 NICU OS X 10.10.5, Photos will be leaving after that print is sent to the printer.

  The photo prints fine, but needs pictures to be restarted every time.

  Does anyone have the same problem?

  Any solution?

  Thank you.

  I've not seen posted here - but since you are more than a year behind in updates, bug fixes and new features, you can see a verry old bug that has been fixed many years ago for people who follow to this day - unless he ia a clue right for you m = not updated I suggest you backup and update of OS X Sierra = and Photos 2.0 - this never can solve your problem

  LN

• I have a MacBook Pro, who hates contact my HP Envy 7640 printer all-in-one. Printing can take as long as 10 minutes! If it prints at all! Does anyone have similar problems?

  If I use my iPad to print a photo there is no problem, but if I use the Macbook for the same function, it will be either print it after a long period of time or he'll quit and say "Printing cancelled!" It seems that these problems started after the update. I am running El Capitan 10.11.6. In addition, when you use Hallmark Card Studio for Mac, as soon as I use two back, it will print the first side no problem and then he hangs up and ends by spit the paper without printing the second side! When I got to the printer, everything worked fine, but now...

  Maybe:

  e-with-OS-El-Capitan/td-p/5417344 http://h30434.www3.HP.com/T5/Printer-Software-and-drivers/HP-Envy-7640-compatibl

• How to print multiple copies on a HP Envy 5540

  I'm running OS X 10.7.5. on an iMac. I recently bought a HP Envy 5540, connected wireless printer. It fails to print more than one copy at a time. I see nothing in the software or instructions to change it. Help please!

  It is not clear, put you number of copies in the boxes of Copies and pages?

  Can try this...

  Startup HD, (operation key shift key down to start), run the disk utility in Applications > utilities, then highlight your reader, click on repair permissions.

  All devices which appeared already in your list of printers and faxes list should be added again after resetting the printing system.

  Reset the printing in Mac OS X 10.5.x system +++

  1. To use the reset function of printing under Mac OS System X 10.5.x, follow these steps:
  2. Choose System Preferences from the Apple menu.
  3. On the view menu, choose Printers and faxes .
  4. Control-click on the printer list on the left side of the window, then choose "Reset printing system" from the context menu. If you don't see the list of printers, Ctrl-click on the text "click on + to add a printer or fax" and select "reset printing system...". »
     
     As an alternative, if you have one or more printers from the list, you can click the "-" (deletion of printer).

  http://support.Apple.com/kb/ht1341

  Reset.

• ENVY 15: HP Support Solutions Framework Service - high CPU usage

  ENVY 15, 10 Windows version 1607

  CPU cycles was about 50% this morning and discovered that the HP Support Solutions Framework service was 40 + % permanently.   No problems so far with high utility usage.  Problem started not with the update of the birthday that was filled with 4 days and there are several reboots.

  At a chat session with HP support, but they couldn't help.

  I stopped running - task seems to restart every time I run the HP support assistant and continues with + 40% of CPU usage.

  Any suggestions please?   Y at - it an update utility that I have to download?

  Uninstall HP Support Assistant HP Support Framework in Control Panel > programs and features

  Then, reinstall the latest version of this link

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

• HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

  Hey everybody,

  My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

  What can I do to fix this?

  Thank you

  Bill

  Hey Bill,.

  Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

  HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

  http://support.HP.com/lt-en/document/c05144863

• HP Envy 4500: HP Envy 4500 reset admin password

  I just bought a new HP Envy 4500 and impossible to access many functions through the online web interface IP address. It keeps to a secure https version and then pops up to ask for a name and a password.

  I tried using admin / admin and a lot of variation with no luck.

  Any suggestions or help on this?

  Thank you.

  Rainbow7000 nailed you. I'm in place and operate properly. Thank you for your quick response to my question.

  See you soon,.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5640: Missing emails 'subject '.

  When I send an email from a Google account to the printer using the address @hpeprint.com, the body of the text of the email is printed, but the "subject" is not printed.

  Can you please help.

  Hello

  It is exepcted, the ePrint print mail attahed content or supported only the files, not the subject of the e-mail:

  Type a subject in the subject line. An empty e-mail subject line can cause the HP ePrint Server cancel the print job.
  
  E-mail subject lines do not print.

  http://support.HP.com/us-en/product/HP-envy-5600-e-all-in-one-printer-series/6583033/model/6583034/document/c03721293/

  Kind regards

  Shlomi

• 4524 ENVY: Envy 4524 habit of scanning

  Hello

  I recently changed my ISP and they gave me a new router. I set the router upward and printers on wifi and everything works fine, except for scanning.

  The scanner works very well using a generic scanner software but is not a very user-friendly software. So I want to use the HP scanning software.

  When I open the HP Easy Scan it opens fine and the scanner is listed and presets are photo, graphics etc, but when I press 'analysis' it comes back with an error message 'Scanner reported an error' HP ENVY 4520 is currently unavailable. Please check if it is turned on and... »

  Any ideas please?

  Thank you very much

  Hello
  From the Applications folder or its subfolder HP, delete all existing scanning from HP and HP Easy Scan by moving it to the trash, and then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Finally, if the problem persists, try restarting your router by unplugging its power for a while, it allows up to 3 minutes to start.

  Once the internet connection returns, restart the Mac and the printer and look for difference ay.

  Kind regards
  Shlomi

• ENVY 27-p100no: is it possible to activate Intel VT on my HP ENVY 27-p100no?

  It is possible to activate Intel VT on my HP ENVY 27-p100no?

  Watching the Intels Web page reported that the Intel Core i7-6700 t has support for Intel VT

  Hello:

  See if there's a parameter enable VT in the BIOS of your PC as shown in the general table below...

  

• HP ENVY tilted 27-k201nd: hdmi in

  Hello

  I have a problem displaying a screen HDMI in on my desk. I have connected my laptop (also HP) to my desktop computer with a screen to HDMI cable. My office does not recognize another screen. My laptop goes white, it recognizes the display on the cable.

  Just installed a new driver for Windows 10: Driver-video card - Nvidia 10.18.13.5330 Rev.A, but did nothing after the reboot. The button: HDMI in the left side does not work either.

  Anyone know what to do?

  Thans in advance!

  Concerning

  Janneke

  Hi @jANSKIBIET,

  I read your great post. The bios is not updated. There is an update of the bios for windows 8.1. I presume that is what got delivered with the PC, and later you upgraded to windows 10.

  Please visit these links: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/w10tp-not-detecting-my-hdmi-cable-to-tv/6868d97c-d008-4184-9437-60df25daa97f

  Link 2: http://windowsreport.com/hdmi-output-problems-windows-10/

  Do not click the ads because it is a 3rd party site.

  If this does not solve the problem and worked with windows 8.1, please back up your files and restore the windows 8.1 operating system.

  Link: http://support.HP.com/us-en/document/c03489643 

  So please update the bios, drivers chipset, video and audio from this link: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-Recline-27-All-in-One-Desktop-PC-series/6876041/model/7233230

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Trust me I did everything I could to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.