envy dv7: cyberlink youcam

Similar Questions

• Nine ENY HP dv7 Cyberlink youcam not working not

  Hello, I have a new laptop dv7 in HP Envy, model # DV7-7240, windows 8, just bought 3 weeks ago at Staples.

  When I tried to Skype for the first time, he didn't say no camera detected?

  When I go to the devices to look for the built-in webcam, I can't find it?

  Thanks for any help with this, very frustrating, suggestions or let me know if you need info more accurate on my laptop special.

  Thank you

  He finally worked after downloading some updates for my laptop

• How can I activate my HP TrueVision webcam (HP Envy dv7;) Windows 8)

  Really, I'm losing my patience here. My laptop is brand new. I remember the first time I started it, I clicked on CyberLink YouCam and the machine worked. I even took a picture with her.
  
  Since then, I try to activate the webcam and it doesn't work. I wanted to video chat on Skype but the webcam was not enabled, there is no choice of webcam.
  
  I've read that if you go on Facebook and click 'Change your profile picture' and then 'take a picture' it activates the webcam, but not in my case.
  
  When I run CyberLink YouCam, it says that he has not found webcam and if I activate it if I a.
  
  So here's my question: how to turn on the webcam? Please, give me the instructions on how it works. What I have to press the key combination or whatever.
  
  I'm the HP dv7-7202eg with Windows 8. Bought and used in Austria, if that information makes a difference :-)

  If the webcam was working before, it may be "stuck".  If this is the case, then a reset can throw everything is free and you'll be "back in business" in a few minutes.  If the reset does not fix it, there are a few more options.  Stop when it works.

  Downstairs is a Help Guide that goes over the tests and the options you have available on the software to help you solve the problem.

  This is a whole new system. If all else fails, please do call HP and ask for help!  Just because the webcam worked before doesn't mean it works now.  These webcams little are fragile and they can break - the wires are tiny and they can be crushed, twisted or broken at any time.  If the tenacious webcam does not work, call HP and ask for help.  Something may have been missed or nit can be broken!

  Contact HP

  Try this simple Reset:

  Laptops - forced Reset to solve Hardware and Software issues-battery not removable

  OR

  Laptops - use Hard Reset to solve Hardware and Software issues - removable battery

   

  =====================================================================================

  Is your driver installed?
  

  Cyberlink YouCam sp59986

  NOTE name and location -likely the *.exe file to save to "downloads".

  • Install the software / driver installation package: If you have control of "Admin", you can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  =====================================================================================
  If delivery to zero and the driver Installation bring no joy:

  • Please close all applications and restart the notebook
  • Press the switch and as Notepad starts, tap on the ESC key to enter in the Start Menu
  • Select F10 to open the Menu of the BIOS
  • Press F5 to load the Defauls (could be F9 - see the bottom of the page for the correct key)
  • Using the ARROW keys to navigate, select YES and press on ENTRY.
  • Leave the system completely load (start-up) and connect
  • Splash screen > Desktop > Windows key + X > Device Manager
  • Check the device for the HP TrueVision Webcam Device Manager

  ====================================================================================

  Update the BIOS

  You can check to make sure that your BIOS is updated to the latest version.  If needed and you decide to do, you can opt for the update of the BIOS.

  ENVY of HP dv7-7202eg Notebook PC drivers & downloads

  Update the BIOS:

  • Disconnect all the USB drives
  • Always run power cable
  • Do not touch the system while the update is in progress
  • Optional: leave wireless touch YOU, but turn off the router (make sure that there is no interruption)

  ====================================================================================

  The "Webcam all things ' for Windows 8:

  Laptop HP TouchSmart and PC AiO - Webcam troubleshooting (Windows 8)

  Good luck!

• CyberLink YouCam 5 settings blocked my laptop

  Just bought a new laptop from HP ENVY m6. CyberLink YouCam 5 pre-installed cam. I can open the software and it seems to work fine, but when I try to access the settings of the computer freezes and crashes. I end up having to hold down the power button to force a shutdown.

  Any ideas?

  Freddie

  Hello FreddiePhuzz,

  Welcome to the HP Forums!

  I understand that the YouCam software freezes on your laptop.

  It would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

  It can help to update the software. You can download the latest patches here: YouCam software - update

  It would also be useful if you could open event (type eventvwr in the search to start) Viewer, select the Windows logs in the left column and selected Applications. In this list, find the critical errors that say the crash of the Application or Application Hang and reference your YouCam software. Send the contents of the general tab in your response.

  I look forward to your reply!

• CyberLink YouCam delete from my HP laptop?

  I just got a HP ENVY 6 and above other usless software I found YouCam.

  I know that it ads some special effects that I need, but my concern is:

  "Can I remove this software and will this affect my webcam on Skype functionality or elsewhere?

  Thanks in advance

  

  In fact, if I remember correctly, the driver of the webcam comes with the Cyberlink YouCam software. You can try to uninstall and test it with Skype. If uninstalling it affects other software, then you can reinstall using the HP Recovery Manager--> I need immediate assistance--> Reinstall Driver & Application.

  

  

• CyberLink youcam is blury and blurred

  Why is my cyberlink youcam went blury and blurry all of a sudden? Skype is also like that.

  How can I solve this problem?

  Hello rashel96. I understand that the webcam seems to be blurry all of a sudden. This can occur when the calibration is off or when the hardware of the webcam has become defective. As it is vague on several programs, this indicates that the webcam is the source of error. To help you, I need the following information:

  1. computer model number. If you need help to find this information, you can reference the following Web site: http://support.hp.com/us-en/document/bph07555

  2 operating system. If you need help to find this information, you can reference the following Web site: http://windows.microsoft.com/en-CA/windows/which-operating-system

  3 have you tried a second webcam in order to assess whether it is a webcam, or several having the issue?

  In the meantime, I like you to follow the troubleshooting in this HP documents topic solved webcam, below. Please choose the appropriate document based on your operating system:

  Windows Vista: http://support.hp.com/us-en/document/c01235743

  Windows 7: http://support.hp.com/us-en/document/c02452221

  Windows 8: http://support.hp.com/us-en/document/c03430151

  Please reply to this message when you are done troubleshooting using the above document. If the problem persists, please provide the results of troubleshooting information and them that I asked questions about earlier in this post.

  I look forward to your reply.

  Mario

• CyberLink YouCam

  When I opened Youcam CyberLink all I see is a white square, where the image should be. the camera usually runs for half an hour, then stops working. I don't see notifications on the camera is not connected etc...
  The only thing I see is the white square. I write this, I see this message on the place that Im writing. Please help as soon as POSSIBLE because I really need this camera on a daily basis.
  
  Thank you

  Hi @BITCTangerina,

  Welcome to the HP Forums, I'd love to help you with your CyberLink YouCam. If I understand your description that the YouCam is not working, but there is no notification or an indication as to why it won't work as expected. Please use the following document to solve the problem and I would like to know the results of your efforts: Computers HP - Webcam troubleshooting (Windows 10: 8).

  Thanks, I look forward to hearing back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you.

• HP Pavilion: CyberLink YouCam 5 Question

  CyberLink YouCam no longer works on my computer.  When I try to start the Cyberlink youcam program 5, I get the following error message "the concurrent user sessions are not supported." However, no session running at all.  Any suggestions?

  Hello

  I suggest to uninstall the current version of YouCam 5 since its entry in programs and features, then reboot the laptop and install YouCam 6 from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71830.exe

  Kind regards

  DP - K

• Envy dv7: SimplePass Windows 10 Finger Scanner does not

  I installed Windows 10 months. I recently installed a "critical" update  After the installation of the system, my icon 'start' at the bottom left of my screen don't work anymore. My SimplePass is no longer turned on or worked.

  I did a system restore on the eve of the critical update.   I still can't use SimplePass.

  Is this a known bug?  Any suggestions?

  Thank you.

  HP ENVY dv7 Notebook PC model system

  System Type x 64-based PC

  System SKU B6B75AV

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.29, 10/03/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  PCR7 Configuration binding is not Possible

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume2

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  Physical memory (RAM) installed 12.0 GB

  11.9 GB total physical memory

  9,08 GB available physical memory

  13.7 GB total virtual memory

  10.7 GB available virtual memory

  I typed "SimplePass" in research on the information system, and this is what was posted:

  Path C:\ProgramData\Oracle\Java\javapath; C:\Program Files (x 86) \HP SimplePass\x64; C:\Program Files (x 86) \HP SimplePass\; C:\Program Files (x 86) \NVIDIA Corporation\PhysX\Common; C:\Program Files (x 86) \Intel\iCLS Client\; C:\Program Files\Intel\iCLS Client\. C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Files\Intel\Intel (R) engine management Components\DAL; C:\Program Files\Intel\Intel (R) engine management Components\IPT; C:\Program Files (x 86) \Intel\Intel(R) Components\DAL to engine management; C:\Program Files (x 86) \Intel\Intel(R) Components\IPT to engine management; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x86; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x64; C:\Users\Sally\AppData\Local\Smartbar\Application\;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\

  Hello @SymKat,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the fingerprint reader and wanted to help!

  Try uninstalling the driver and let your search system to a compatible driver.  You can use this link to help you, if needed: how: install and update drivers in Windows 10

  If you're still having problems, then try to review the following document and let me know how it goes: HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• HP Pavilion Notebook 15-199sa: the Cyberlink YouCam software update is ' hang "

  Hello

  Today, HP has automatically downloaded and installed Cyberlink MediaSuite10-desktop on my laptop and everything went without a hitch.

  It then downloaded immediastey software Cyberlink YouCam OK, but the 'installation' seems to have hung during the last 40 minutes or so.

  In Task Manager, a process of 'Windows Modules Installer function' alternates between enough intense activity of the CPU and the disk activity.

  I'll give him a little longer, but is it possible to interrupt this installation apparently failed without causing problems? If so, how can I go to try reinstalling software Cyberlink YouCam - or the software HP tries again to itys own agreement?

  I had only the laptop a few weeks and that you don't know much anything.

  John latter

  The second installation went well.

  This time, I watched what was going on:

  When the download is complete, the actual attempt the installation was indicated by two gear wheels spinning - something I missed the first time I thought that the icon has failed (a cross instead of the green checkmark) meant that the program had hung.

  Basically, I panicked for nothing - Oops!

• CyberLink youcam 5

  Hello

  Problem 1

  I have windows 8.1 with media center hp laptop and I have problems with downloaded youcam5.i Online cyberlink youcam effects and when I install them it says the pip model is invalid.can u please help me.

  Problem 2

  I want to connect on windows 8.1 but it shows only not the network, o adhock networks so I could connect to it.is it in any case I could connect to networks adhock on windows 8.1.please help me

  Hi @Amro12 ,
  
  I'd be happy to help you if necessary. How can I find my model number or product number?
  
  In the meantime, here is a link to the HP Support Assistant if you need. Simply download and run the application and it will help with the software and drivers. Here is a link to troubleshoot Webcam in Windows 8.1.

  I would like to uninstall the software for the Webcam and download from the documenton how to reinstall the original webcam program that came with your computer. Figure 2: Drivers and Applications to reinstall.

  I hope this helps.

  Thank you.

• CyberLink YouCam not working not not on Pavilion dv7t Quad

  Type of laptop: HP Pavilion dv7t - b 6, 00 CTO Quad Edition Entertainment Notebook PC

  I don't understand how to work the webcam on my laptop. The lens of the webcam has "HP TruVision HD" written underneath, but good me if I'm wrong, I think that it requires the-"CyberLink Youcam" software third for access.

  Months ago, it has stopped working. Frustration, I deleted each point of access to the software, except for the uninstall "programs and features".

  I'm wrong, or what I need to buy new software from CyberLink to use my WEBCAM IN seriously BUILT?

  I have spoken with a HP support technician, he said, "it might be the problem with the connector between the webcam and the motherboard. If so, the motherboard will be replaced. »

  It seems that I have to wait as I have time I'm not so dependent on my laptop to send in repairs. Thank you very much for the help!

• The HP Envy dv7 - 7323cl has a double hard drive Bay

  The HP Envy dv7 - 7323cl has a double hard drive Bay?

  Hello

  Yes, it can accommodate a second HDD.

  Kind regards.

• Hinge for the HP ENVY dv7 problem

  I bought a HP ENVY dv7 two years December 6, 2012.  I don't really know when this hinge problem started, but when I saw the first time I've been a bit supprised then ignored it, thinking it was no big deal. But then he began to cause more problems than time and whenever I opened my laptop, problems such that the angle of the face has been slowly poping up and the window too.

  I now could push corn on the backs of the part to place when never opened the laptop and the part comes out even when I close, so I would it push in place.

  Last night, I discovered that the rear corner detached reveling inside the laptop when closed. I found the piece broke not for long. I think the part that is interrupted when I was placing the laptop inside my bag.  On a side note, not once I have droped laptop.

    

  Piece                       Side view                                                                                                         Back View Closed

  Is there anyway to fix my problem of Hindge?

  In fact I recently fixed it my self...

  I guess the screw jumped and it is the only screw that holds one side of the hinge in place.

  I just replaced the missing screw with one of the screws in back and it's been fixed just like new. Well other than breakage of exhibits... I also noticed that the other screws were not tight all the way.

  I hope this helps.

• Upgrade the RAM for HP ENVY dv7-7233nr

  How much could I add? I currently have 481 GB free of 569 GB. My computer will not slow down, but I use this laptop for games and I would like to have more space for custom content for the Sims 3 to download. It works not too badly, but there is a little late, and sometimes it freezes. I don't know if it is possible to add ram, so that's why I'm here.

  I would like to know how I'm going to do.

  Hello

  A little delay could be due to its graphics, BUT you can't do anything on this subject. Your machine currently has 6 GB of RAM:

  http://support.HP.com/us-en/document/c03509235

  You can switch to 16 GB as shown:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/envy+dv7/envy+dv7-7233nr-upgrades.html

  You can buy from them or use the information (including the price) to buy elsewhere.

  Kind regards.