ePub graphics are not properly sized

Similar Questions

• pictures and graphics are not displayed to the top

  I visited several sites and seen this problem. Some appear and others do not appear, even after right-clicking and then clicking see photo. Any suggestions? I don't know if it's the browser or the computer itself.

  Hello

  1. what application you use to display the image?

  2. what web browser do you use?

  3. doesn't this problem occurs with the particular application or other applications?

  Additional information on the issue to help you further.

  I would also update the graphics drivers from the computer manufacturing and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are using Internet explorer,.

  I suggest to follow the link and check.

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

• altered graphics are not displayed correctly

  I'm under 6.2 Lookout on a small panel pc.

  I use graphics custom which until now display properly. I had to make some changes to the image, which has been done on another computer, then the graphical output has been replaced by a new one, using the same name.

  Lookout displays the chart but with messed up color (the Greens are reduced to shades of gray) and the image is blurry. Intact graphics are ok

  Thank you Ryan

  The resolution and color are all correct, then I got the graph re-written and this time it worked.

  Yet another mystery

• All the graphics are not rendered in 4.2.2

  We have recently improved application Express Application Express 4.2.2 4.1.  Application works very well in 4.1 and it is powered.  In development, we have upgraded the version of Apex and hover over the application.  To our surprise and confusion, no (bar, line, pie) graphics do not appear.  I go through the process to create a chart and which shows no more.

  Someone at - it see similar questions and solve it?  Thanks for any help.
  Adam

  Thank you for the answers.  I have check up and everything that has been done or was good.  But by deleting everything on the page and rebuild, I found the problem.  In my page header text, I got:

  This was necessary due to problems that we take with APEX and jQuery.  To remove this code, all the graphics appear as they are supposed to.  If the global conflict was the ready appeal.  Who killed the charts.  APEX updated as shown using javascript so it is therefore necessary to ensure that other javascript calls are not incompatible.

• RH9: graphics are not displayed, but the fact of the anchored frame

  TCS3/FM10/RH9

  I'm a link FM books to my HR project.  With the help of FrameSLT, conditionalized my graphics (contained in an anchored frame) on FM so that they are not displayed.  It works very well on FM: there is no image and no image is anchored.

  However, in the draft HR charts are displayed with sharps; they appear also with sharps in the preview.  It's the way that it used to be in RH7. In FlashHelp, the graphics do not appear but the anchored frame is left behind, so I have a large white space where the graphic should be.

  I thought that there was a way that you don't have graphics in the project in the first place.  View the graphics in the project really slows down the update and generate processes. Why is HR still collect them if the graphic and anchored framework do not appear in the book of FM?

  Thanks in advance.

  It is about the other 'branch' Settings Conversion settings. The field is called 'Apply FrameMaker building conditional Expression' - check a blog by Matt Sullivan on Roundpeg on its use (http://blogs.roundpeg.com/2010/06/tcs-tips-for-conditional-text/) post

• all pages are not properly displayed.

  Windows kept closed so I had to do something with the hard drive if I remember.pretty that I changed a few settings, but can not remember what.for instance if I go on facebook, a few pictures on the screen do not appear, just a box with a red in it.also on Facebook poker x, pages displayed incorrectly, also on my dreamteam page.please help because I am not very good with computers.thanx

  Make sure that the "Show image" option has not been turned off.
  If the option to show images in Internet Explorer is turned off, you can not see pictures. To determine if the show pictures option is disabled, follow these steps:
  1. in the Tools menu, click Internet Options.
  2. click on the tab advanced, under settings scroll 'Multimédia' and make sure the "Show pictures" checkbox is checked.
  3. click on OK.

  If this does not work, see the following Microsoft article below:
  Images are not displayed on Web sites in Internet Explorer
  http://support.Microsoft.com/kb/283807

  I hope I could help

• Shairng private network file - files are not properly sharing

  I am a small business owner. I set up a private network. Instead of sharing in the 'Public' folder, I identified individual files and does the work to ensure the sharing of files. The files are "marked" as being shared in the network and sharing Center files appear when I click on "Show me the folders and files that I share", but when entering the network, the files are not displayed.

  Protection options password for account currently OFF sharing. Other sharing (print, media, CAD drawings) work.

  How to solve this problem?

  We have a laptop running Windows 7. two laptops and two desktops running Vista. All versions are Home Premimum and basically serve us well.

  Hello

  You must open a new folder under the main hard drive (or any disk storage) (you can also add void structure of folders for) and share the new folder as a whole. and leave only the public folders. Move the relevant files to the new folder structure.

  Maybe this can help more.

  -- ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Clustering: Some grains are not properly replicated

  Hello world

  I'm doing our request to ADF runs on a cluster server. I did everything the Oracle docs said but it works partially.

  Then, when I stop the managed server that I am connected and I do an action on the application of the ADF, my session is not lost, but I'm still back to the homepage. After some debugging, I find that our MenuBean (scope = session) are replicated only after the login and the subsequent changes are not replicated. Here's how my tracks looks like, I print the current tab and the number of times I've done a navigation.

  Here's what my logs...

  • Server #1 - homepage (Count = 0)
  • Server #1 - first tab (Count = 1)
  • Server #1---deuxieme tab (Count = 2).
  • #1 server is off... Can I do an action on the second tab
  • Server #2 - homepage (Count = 0)

  Why? Does anyone have an idea of what could be the problem?

  Thank you very much

  Guillaume

  JDev 11.1.1.7

  WLS 10.3.6

  I finally managed to get this job!

  It seems that the Oracle docs say nothing about the need to notify when we modify a bean in a session scope, we mark the bean as "modified" for have replicated it to the other server, as in the example below.

  Thank you for all your help

  Guillaume

  When you design an application is running in a clustered environment, you must:

  • Ensure that all beans controlled with a service life longer than a single request are serializable (in other words, they are implementing the java.io.Serializable interface). Specifically, beans stored in session scope, page flow extended and brought the view must be serializable.
  • Make sure that Oracle ADF is aware of changes to the controlled beans stored in ADF litters (view scope and extent of page flow) and turn on track changes to ADF memory scopes.

  When a value of a managed bean to be seen extended or page flow is modified, the application must notify Oracle ADF so that it can ensure that the new value of the bean is replicated.

  Configure high availability for Oracle ADF, and WebCenter Applications - 11g Release 1 (11.1.1)

  public void setValue(String value) {
      this.value = value;
  
       // I'm not sure which one of the two is required
      ADFContext.getCurrent().getSessionScope().put("myBean", this);
      FacesContext.getCurrentInstance().getExternalContext().getSessionMap().put("myBean", this);
  }
  

• Graphics are not displayed in IE 8

  Hello
  
  I use the example of standard Application in the APEX 4 of my workspace http://apex.oracle.com.
  
  The cards work fine in Fire Fox but when I run the application in Internet Explorer (IE) 8 graphs are not displayed.
  
  I try Charts to someone using only IE, suggestions of demonstration?
  
  ADE

  Hi Ade.

  your IE8 is capable of displaying Adobe Flash objects? The tables in the sample application using AnyChart, which generates maps based on flash.

  -Udo

• Pages are not properly displayed

  Hi, I use OS X 10.9.5 and everytime I try to go to Gumtree, for example, no pictures are displayed.

  Whenever I do a few tests online, pages will not display properly.

  For example if I go to some of the apple sites, I always get the same questions and page does not load.

  

  On some sites (e.g. Ebay), I get security warnings:

  

  I also have some problems with I tried remove certificates, played with DNS and used all the tips I could find. However, none of them worked.

  Any ideas of what it could be?

  Your screenshots are from a different browser. Safari is affected?

• Equium A60-157 graphic works not properly

  Hello

  I think theres something upward with my graphics card >.<. i="" dont="" know="" much="" about="" laptop="" graphics="" cards="" but="" reading="" on="" the="" net="" apparantly="" it="" doesnt="" have="" one="" per="">

  I went on 'DXdiag' and there is that something called a "Standard VGA Graphics Adapter" as the name of the device. I tried reading on it but its confusing to me and don't really know what I'm looking at.

  the type of chip is mobility right 7000 IGP
  8 bit

  As Ive said, I'm not very good with this stuff, but he struggled to run solitare smoothly... I mean come on! SOLITARE! Laughing out loud.

  Can someone help me?

  Thank you

  Hello

  First question: what's your preinstalled system?
  Second question: have you installed the graphics driver compatible available on the European driver Toshiba page?

  In my opinion, it seems that this driver is missing.

• Graphics are not detected

  Hello

  Envy 14 1050 ca

  Recently, I cleaned my laptop fan opening at bottom, and screwing open the fan housings.

  I know not if I can hit, or in contact with her, but on my next boot, one of my graphics don't have not been detected (AMD radeon hd 5650) in one of my games, the Device Manager or hp support assistant.

  My laptop is running on the Intel HD graphics card.

  I tried to find the location of the chart in the manual to find if I could fix it, but I have not found anything.

  Thank you.

  Try this... Shut down your laptop and remove the battery and plug... then press the power button and hold it for like a minute... then put all in place and up... hope this will start...

• align the guides are not properly

  Yesterday my guides stopped lining up properly. I can always use my alignment and distribute spacing for objects tools I've drawn on the artboard, but if I try to use the guides, the guides just go to random places way way way outside the artboard. The object remains in the same place. It happens on all files, that I opened. I did an update. I turned everything off and on again. I erased guides. None of my colleagues have seen this happen. I can work around it, I guess, but I regularly use my guides and it will be difficult to change my workflow to work around their use is no longer.

  Anyone know what is happening?

  Thank you

  Christy

  I fixed it. Limits overview 'use' was checked in the pull down menu in the window of the alignment. I have disabled and are back to normal. I don't know how he checked in the first place. I searched through old forums and found this suggestion. Thanks for everyone to research.

• "your video card drivers are not properly installed, are obsolete or are for the DARDWARE not supported"

  This message returns constantly to the illusion that after I saved this computer, using the product key and installed the FREE TRIAL of Microsoft Office version for the next 3 months. During installiation, Windows kept saying that "C drive has NO ENOUGH SPACE" and required "delete" old "unused programs", I agree, but it has never been the question on the hard disk drivers.
  I have Windows VistaHome Preimium for 3 years, (this page is not available here in your web site) and since the 19th of February2010, I read all "advising them," trying to 'restore', nothing helps. Last year the illusion was intalled easily and high speed. I've never met a single problem, the same computer, same material, just suddenly become 'unsupported', I need Windows just restore all my setting back and stop deleting my settings and downloads. How can I restore material that has been removed from Windows from my computer? Help, please.

  ArgonautAmber,
  Then you get this error from the program of Secondlife or do you have other programs as well?  How much free space is on your hard drive?  Have you updated your driver video crad lately? You have an active antivirus program running?  If so, is up to date and you have scanned your system lately?

  What I suggest you to start with:
  Run the disk error check to see if there is any problem with the player.

  Check the free space on the hard disk.  If you run very low then you may need to delete the old unused programs or to archive documents of CD Si you have not emptied the trash lately, do the same.

  If you do not have an antivirus running, then take a look at these:

  Get rid of malware

  Can I clean an already infected computer?

  Check the video card manufacturer's Web site and download the latest driver for your hardware.

  Let us know the results.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Files are not properly displayed

  I was playing with my rocket with the new firmware update! Unfortunately, I found that folder names do not always display correctly.  They do, however, appear correctly in Solution Explorer window.  I have sync in auto-detection mode (MTP) with WMP.  The courts appear fine, but not the longest.  (also, as a side note, if I make a folder on the computer in MTP mode, even if I rename it, it just seems like 'New folder'.)

  Examples:

  Focus on the family Radio theatre

  is

  94010000_Focus on Th FRS

  Intermission The Greatest Hits

  is

  The largest 03020000_Intermission H

  Welcome to the Freak Show live

  is

  FF01000_Welcome to the Freak Show

  I'll post more, but it would be redundant.

  Fan of XC

  XCFan wrote:

  I was playing with my rocket with the new firmware update! Unfortunately, I found that folder names do not always display correctly.  They do, however, appear correctly in Solution Explorer window.  I have sync in auto-detection mode (MTP) with WMP.  The courts appear fine, but not the longest.  (also, as a side note, if I make a folder on the computer in MTP mode, even if I rename it, it just seems like 'New folder'.)

  Examples:

  Focus on the family Radio theatre

  is

  94010000_Focus on Th FRS

  Intermission The Greatest Hits

  is

  The largest 03020000_Intermission H

  Welcome to the Freak Show live

  is

  FF01000_Welcome to the Freak Show

  I'll post more, but it would be redundant.

  Fan of XC

  If you have folder nav now, so why synchronize and especially in MTP mode? Drag and drop in MSC...