Equium 110-252: how easy to use the Toshiba Recovery CD?

My Equium 110-252 has been plagued with problems since I downloaded a certain number of security for free programs for the protection of personal information on the internet. Since then, a number of programs stopped working (media buttons failed, touch and launch went etc.).

System Restore will not work for any of my restore points and I just get an error message saying that no change has been made. Re-installed a number of programs and have them work again for a time, but the night last windows froze and I had to turn off the laptop using the power button. When I started the laptop to the top again once all my work was cancelled and again programs were not working.

Planning to create a backup disk in the future (a lesson learned!) but in the meantime I think I might have to use the system provided with the laptop recovery disk. Being a novice I'm just afraid that I will be confronted by scary guests when I insert the disc to the top! (especially as the manual says only: "follow the instructions on the screen"). During the period of warranty, but I am concerned that the problem is not covered by that as he came thru my introduction downloaded the software on the laptop!

Can someone please tell me what to expect when you use the recovery disk? Is it as simple as it sounds? Y at - it traps?

Reassure (!) or opinion would be welcome! Thank you!!!

The product recovery DVD is a pre-installation factory Windows when you first bought the laptop. Using this reformatted your hard drive, destroying all the personal data, so it is very important that you back up your files. The process is relatively simple to start just the disk and allow 10-15 minutes to do its work.

The only trick is having to re-register your details and install all service packs of Microsoft.

Richard S.

Tags: Toshiba

Similar Questions

  • Equium A200-1V0 - how to use the Toshiba Recovery CD product?

    I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

    I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

    Questions-
    (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
    (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
    (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

    Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

    James

    Hello James

    The recovery procedure everything is very simple and here are the answers to your questions:

    # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
    # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
    # Yes

    When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.

  • Re: BSOD after using the Toshiba Recovery disk

    Using the disk recovery works up until the point when the system starts up his game.
    I turn on the computer to configure the pc. The system will not complete the setting to the top. I either get a message unexpected problem and the pc tries once again, or I get the BSOD.

    Help!

    Hello

    What model of laptop do you have?
    Have you used the recovery disc in the past with success?
    Have you updated something on your laptop (RAM, HDD)?

  • Equium A110-252 - how can I find the network drivers?

    Hi guys :)

    I have just reinstalled Win XP on a model number Equium A110 - 252 PSAB2E
    Can't find driver for network controller... everyone has ideas?
    Ive looked for in these forums, but in vain :(
    any help would be appreciated

    Thank you

    GW

    Have you looked on the Toshiba site?
    You will find the network driver and all other drivers.

    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • How to reach again the Toshiba Recovery Media Creator?

    Hello

    I uninstalled the recovery by mistake software authoring tool during cleaning, trials, and the things of the demo on my new laptop.

    Any idea where I can get this?

    J

    Hello

    Well, the simplest solution would be using the System Restore tool.
    You can assign to the BONE at the beginning point of time before you uninstalled this tool.

    What do you think of this suggestion?

  • Satellite P500 - loop of reboot after using the Toshiba Recovery disk

    Hello

    I have a problem recovery SATELLITE P500. I did the recovery disks. It starts ok on the recovery disk and format the hard drive and copy the disks to the hard drive. Then, he begins installing windows and restarts.

    He then goes to a loop
    (1) marketing and says "Setup is preparing your computer for first use.
    (2) Toshiba banner saying please wait... Second installation may take several minutes. Pleae do not interrupt or shut down the computer!
    (3) Windows logo
    (4) close...
    (5) restarts and goes to 1)

    It would be great if someone could help me with this.

    Thank you very much
    Softari

    Hello

    I noticed the same thing on my Satellite P500, but I must say it s not a problem, it of quite normal. The computer will restart several times (10 times or more) to complete the installation.

    You know that a lot of drivers/tools will be installed and some restart is required to configure everything properly.

    So don t interrupt the installation of recovery, just wait a little longer and a coffee. Everything is done automatically and your laptop is reinstalled with the factory settings. :)

  • Cannot reformat using the Toshiba Recovery disk

    Hello
    I'm not sure whether or not my question was published by third parties. Please let me know if someone had posted this.
    Here's my problem.

    I put the recovery CD in the CD-ROM drive. Then I restart my laptop and press F12 and select boot from the CD-ROM. Then I come to a black screen where it says 'Windows 98...'

    After some time, the failure message appear.

    My laptop was with Windows XP and I don't know why the word 'Windows 98' appears. After failing, I try to go to the window and double-click the CD-ROM Setup and he says not can read any of the files on CD. The CD is used to reformat the laptop before.

    Is it the corrupt CD?

    Hey mate,

    First of all, it would be interesting to know what laptop you have. Maybe it has been bundled with Windows 98 recovery disk I put t know.

    Theoretically, it could be a problem with the CD. Try another disc and see what happens.

  • Can I restore a single partition using the Toshiba Recovery disk?

    I need to know if I can restore just the windows on my partition main because I don t want to format all my HARD drive.
    In my second partition I have backed up all my files and I don t want to erase.
    Please can someone tell if I can do this?

    If you have a Toshiba Vista recovery DVD then the whole HARD drive will be formatted and it s not possible to restore the operating system on a single partition.
    Therefore, you should always backup before using this disc

  • IM 10 atm installation initiated Preview and I want to know: is it easy to use the dual-boot functionality, if I have 2 hard drives

    Hello!

    IM 10 atm installation initiated Preview and I want to know: is it easy to use the dual-boot functionality, if I have 2 hard drives? I have win7 on my main drive (SSD) and I want to install 10 preview initiated a new partition on my 500 GB hard drive, I created. I'll have to change smth in the bios menu, or I will be asked to choose between win7 and win10 in a menu after boot?

    Yes, it's, it's just like installing Windows on another partition.

    To learn more:

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-the-latest-Windows-build-with/9695dfc7-1C13-4D8D-B10B-587e78c6ac36

  • How easy to use for electronic commerce muse

    How easy to use for electronic commerce muse

    Hello

    You can try the Adobe Business catalyst adobe Muse platform, take one look at this short video

    http://TV.Adobe.com/watch/introducing-business-catalyst/BC-showcase-a-stunning-online-stor e-/.

    Adobe Muse + Business Catalyst integration, training, consultation: HELP + BC

    Please let me know if you have any other question.

  • I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

    I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

    You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

  • How not to use the squint no functionality?

    I forgot how not to use the squint no functionality. Can anyone help?

    18.0 Firefox was released last Tuesday, you need to update.

    See if this FAQ for NoSquint answers your questions.

    https://urandom.ca/NoSquint/#FAQ

  • Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?

    Hello.

    And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!

    Maybe someone knows some software sales in which it could be used.

    Hello

    This Quad Core CPU is an additional processor that is not always in use.
    It was designed in the order using the main processor in some of the media process.
    For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.

    In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
    Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures.

  • Satellite L755 - how to return to Windows 7 using the HDD Recovery folder

    Hello
    are how you today

    I own a toshiba Satellite L755.
    I have recently upgraded to windows 7 to windows 8, and now I do not have windows 8. I want to go back to windows 7.

    Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB.

    What I need is to know if its possible and if you can you explain to me how its done.

    I searched the Web for an answer for tha last 4 hours and I thank you

    > Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB

    A lot of people said you can use HARD drive recovery in order to put the system back to factory settings.
    This true s but this is possible ONLY if the system has not been modified.

    In case you have changed the system, you could go back to the factory settings using the recovery disk!
    Recovery disk may be created using the preinstalled tool called Toshiba Recovery Media Creator.

    Have you created this disc in the past!

  • How to use the "Toshiba controls" with other players?

    Heey

    I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

    A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
    I think that the utility was already programmed and designed to use only these two applications.

Maybe you are looking for