Equium 350 d and Windows 7 - failed to load driver Webcam

Similar Questions

• Failed to load Driver.INI

  I try to download the drivers for a Konica printer and get error message: failed to load Driver.INI.

  I followed the instructions of troubleshooting by performing a clean boot environment. The program still does not work as expected. MS aide said, this issue is not caused by the application or service disruptions, but I don't know what to do next.

  I think you have to look for a solution for Konica.  Are you sure that you have the right driver (in terms of 32 vs 64-bit as well as the printer model and version of windows) (the only other mention, I found re this error brought an incorrect driver for Konica.)

• Windows update fails to load: Win Xp

  Windows XP, SP3 on a Latitude D410

  After repair and update Windows Installer 4.5, Windows Updater would not be responsible.  REF. KB 943144: not exactly the same question, but made 2 method with no luck.  Click Update MS, starts IE8, after 3 or 4 minutes get a "Try MS update today" page, click Start now, get review license page, click on continue.  After awhile looong, get the following dialog box: «the files required to use microsoft update are registered or installed...» ' Select 'register or install for me now. ' Click on continue.  Go to next page: "Download and install latest software update."   The download begins.  After another long period of time "Try MS update today" page reappears and can repeat the same process with no luck.

  From the journal of the Updater:

  Report: Initialization of static data to report *.
  2010-03-22 1812 340 report 19:32:20:078 * OS Version = 5.1.2600.3.0.65792
  2010-03-22 19:32:20:093 1812 340 report WARNING: failed to load information from Win32_ComputerSystem reporting with hr = 80040154.
  2010-03-22 19:32:20:093 1812 340 report WARNING: cannot load Win32_BiosProperties information with hr = 80040154 reports.
  2010-03-22 1812 340 report 19:32:20:093 * locale 1033 = ID
  2010-03-22 19:40:10:703 3452 be8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2010-03-22 19:40:10:703 3452 be8 Misc = process: C:\Program may Explorer\IEXPLORE. EXE
  2010-03-22 19:40:10:703 3452 be8 Misc = Module: C:\WINDOWS\system32\wuapi.dll
  2010-03-22 19:40:10:703 3452 be8 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-03-22 19:40:10:703 3452 be8 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-03-22 19:42:11:843 3452 be8 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-03-22 19:42:11:843 3452 be8 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-03-22 19:44:11:843 3096 dcc Misc

  Also ran the method 1 and 2 in KB 946413 and tried to install/running the Parser MS recommended in this KB.  No luck.

  Note: Should then repair Windows Installer, run the Windows Cleanup utility installer.  Reinstalled MS Office 2003 and I tried to update, highlighting the problem of Win Update.  No problem with installation/update with other applications package.

  In addition, disabled 3rd part firewall and anti-virus during several tests.

  Any help would be appreciated.

  Some ideas at the moment, but can you advise at least that there are specific forums for Windows XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  BTW, it's too late for a restoration of the system when everything worked correctly?

  You have a backup image that you can restore?

  Article on the Windows Firewall if you are interested: http://support.microsoft.com/default.aspx/kb/875357?p=1

  TaurArian [MVP] 2005-2010 - Update Services

• How can I install Linux (Ubuntu or Kubuntu) and Windows on the same HARD drive?

  Hello world

  I have Toshiba L20-148 and I have the Toshiba product recovery DVD and I have the DVD Ubuntu

  I'm only able to install Linux or Windows XP Pro I have with the recovery DVD

  and the only way I know to install both together by installing linux and windows... but every time I try to install windows, then factory data recovery, it is just the whole HARD disk and install windows only...

  any help?

  Hello

  As mentioned that the Toshiba Recovery CD contains image and files during the installation of the OS on the HARD drive or the partition will be formatted. In this case all data will be deleted.
  Therefore, you must create a second partition for the use of Linux. But be careful. Linux uses the special file format. Partition Magic 8 contains and supported the creation of the Linux partitions.

  So if the new partition has been created, you can install the Linux

• Windows logon fails when network drive mapping

  I can no longer map a network drive of my laptop Vista business to my PC (XP).   I enter a username/password valid name, but I still not unsuccessful logon.   I read a gazillion discussions and have made the change to the recommended without result SECPOL tool.

  What makes me mad, it's this used to work!   I recently had to physically move the PC (renovation of the kitchen) and perhaps its something stupid like a missed connection.  Yet, I have access to the internet very well.  I can ping 192.168.0.3 192.168.0. * I'm confused comment.3 is affected. My tivo est.4 and I tested this connection and that's fine.

  I even had a network printer set up works very well: Photosmart \\192.168.0.3\HP...

  The only area involved is WORKGROUP.   I created an account "lapguest" on the PC specifically for this purpose

  I forget some syntax?   The GUI said essentially the same thing.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * / USER: WORKGROUP\lapguest
  Type the password for \\192.168.0.3\pcc:
  86 the system error occurred.

  The specified network password is not correct.

  C:\Users\Wendy>net use w: \\192.168.0.3\pcc * /USER:\\192.168.0.3\lapguest
  Type the password for \\192.168.0.3\pcc:
  The context of the user provided is not valid.

  More help is available by typing NET HELPMSG 3775.

  I think its something stupid, I forgot, but he is elusive.     I also put the name of the computer in the 192.168.0.3 place, but it does not help.  There is no involved DNS.

  Using the graphical interface, I can browse the network to find the folder to add, but there is nothing under the computer name of the computer.  "pcname" is not a valid host name.   Otherwise download "logon unsuccessful".   I tested the connection on the PC and it is certainly true.

  In addition, I traced \\192.168.0.3\C$ successfully, but I got my LOCAL drive (portable) C.   ????  that should be a big clue, but call me clueless...

  I even uninstalled mcafee (completely) just in case.  did ' t like it anyway so no biggie.

  I know that there is a big DUH when this has been resolved.

  Thanks Aaron, but I think I did it to her.

  In the meantime, I decided to try sharing in the opposite direction.   Which made me respond finally that est.1 which est.2 whos.3.   A lot of listening to ipconfig.     What etait.3.2 is the last time.  (the est.2 PC and computer laptop est.3)  I still want to understand how these numbers are assigned.

  I found the option - rr in my earlier review, but do not know if he had an impact.   Also reluctantly, I created an account with the same name on both systems to try.   First of all, I shared with who.    Later, I could share by using the account name that exists on the PC (lapguest).

  I don't really know how the problem etait.2 et.3 mixup questions and/or syntax (file specification must be \\192.168.0.2\share-name) spec not \\PCNAME\share-name and the user must be PCNAME\username) and/or services and windows XP/VISTA problems.  Maybe my new sequence got something instantiated later.   Hope it sticks, whatever it is.   I wrote my orders exactly.  I hope that when I reboot or whether, I not have this problem again.

  Ah-ah... before you sign this note, I went to test the laptop via the network printer I had previously put in place of a printed page.  It did not work.  I can't see why.  the specifications of the printer is Photosmart \\192.168.0.3\HP... which was fine before, but now it faudrait.2.  I'll have to add another printer network for the new address.  I hope I remember how to do this.

  Now, I can clearly see the benefits of DNS.  Is there a simple way to create a name "servername" instead of having to depend on 192.168.0.n?

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards

• Failed to load driver

  Whenever restarting my computer, I get a message that:

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_GENERIC & PROD_STORAGE_DEVICE & REV_0. 00 #00000000000006 & 0 #.

  The machine still works, but I have no idea of what is causing this device or what to do about it.  Can someone advise?

  THE FIXED!

  I went Googling little more and found that someone else had the same problem.
  The solution was very simple:

  services.msc
  Windows Driver Foundation - User-mode Driver Framework
  Change the startup type to "Manual" to "automatic".

  Connect and disconnect USB devices and restart with or without them - no problem.
  Why he was put on "Manual", I don't know.

• Windows Setup does not load driver Marvell D20

  Hello

  Installation: D20, the Marvell controller are attached: 2xHDDs RAID1 and an Intel SSD in a RAID configuration.

  The machine was initially installed with Windows 8.1 (on RAID1 disks), most later improved to W10.

  After a recent, (unknown to me), Windows problem entered a loop 'ASR Preparation. "

  I tried to use USB to recovery, but he did not see the drives.

  At this stage, downloaded driver from Marvell of the lenovo Web site. Note that there is only the version W7/W8.

  Tried to load the driver in Windows (for Windows 10) recovery, the load was successful, but start DISKPART after that froze the recovery. (Also tried to integrate the driver using NTLite, which resulted in recovery of freezing at startup).

  Has given up trying to recover and created 10 Windows USB installation. When I'm at the stage of selection of drive installation and selected the pilot of the "Load driver" dialog, the installation get stuck and animation of course load just went on and on. Subsequently tried to create Windows 8.1 and same media to install Windows 7. Also, who is stuck on the step "load driver".

  During the tests, I tried using different USB (version 3.0 and 2.0) drives. Also downloaded the driver for the Marvell from another Web site, just in case. Tried resetting the BIOS with the default settings. Nothing helps.

  Any ideas?

  Thank you.

  Thanks for the reply, I thought I posted what the problem was, but apparently I forgot.

  The problem turned out to be the SSD. BIOS and Windows recognized, but as soon as I/o operations were made, the player brought to stall. Even the first test SMART said the player was healthy, but the after run the test again, he has not done, and the drive is completely dead. Remove the SSD brought the machine back to life.

  Thanks again.

• Equium M50-164 and Windows 7

  I am considering upgrading the unit above and introduce more memory for the memory up to 2 GB.
  Where are the slots for additional memory?

  Second, after you run the MS Upgrade Advisor, I get a message about the graph showing the current graphics adapter won't support Windows Aero User Interface.
  Is it possible to upgrade the graphics adapter?

  I guess Windows Ultimate or Pro can be installed. Is this correct?
  Your comments would be appreciated.

  Do you really think memory is more important for installing Win7?
  Your laptop is designed for Windows XP Home edition and the hardware specifications are completely different on laptop designed for Vista or Win7 new.
  Anyway, you can try to install Win7, but the problem is that this oldie is not supported and you will not find drivers Toshiba, tools and utilities for it.

  A slot is placed under the keyboard and location for additional memory module is in the lower corner in the Middle under the memory cover.

• Equium A110-252 and Windows 7

  Hi, I hope someone might be able to help me on this one. I have a laptop A110-252. The vehicle currently has only 256 MB of RAM, but I plan to upgrade to 2 GB. At the same time I hope that I might be able to upgrade (reinstallation) of WIndows 7.

  I don't have the laptop in front of me, but I think he has a sticker compatible Vista on it (don't know if that counts for anything good!) and there are Vista drivers available for this purpose. That would be enough to assume it would work ok in Windows 7? I would really like to upgrade that I want to buy the family pack (3 licenses WIndows 7), but it would be useless if it does not work.

  My other thought was to (once I have the upgrade of RAM) is to install Windows 7 Beta, but it would be useful to get the opinion of others.

  Thank you

  Problem is that your laptop model is not supported for Win7 and you will probably have problems to find Win7 drivers.
  You can try to use the Win7 drivers designed for other models of Toshiba with a similar hardware configuration, but if it works, I don't know.
  RAM upgrade is certainly a good idea and I imagine that you can use your good laptop using Vista supported.

• Cannot install Webworks - Windows DLL failed to load - 10 Windows

  Hello

  Try to install 2.2 on Windows 10 Webworks but fails with this message:

  Flexeraawm$ aaa: cannot load Windows DLL
  at Flexeraawm.af (unknown Source)
  at Flexeraawm.aa (unknown Source)
  at com.zerog.ia.installer.LifeCycleManager.init (unknown Source)
  at com.zerog.ia.installer.LifeCycleManager.executeApplication (unknown Source)
  at com.zerog.ia.installer.Main.main (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at com.zerog.lax.LAX.launch (unknown Source)
  at com.zerog.lax.LAX.main (unknown Source)

  Any help is appreciated.

  There is a problem with the installer WebWorks and recent updates of Java on Windows 10 1.8.  The workaround is to use Java 1.7.

• notebook dv6 restored envy and windows 8 not be loading not I don't have disks

  I bought a laptop HP dv6 want used with Windows 8.  The person I bought was not to remove his password or fingerprint scan, I have been unable to reach (I bought out of State).  I did some research and found the best thing to do was restore complete system - which i followed the instructions and made.  I don't have the original driver disc.

  I am now in a loop of contant, where he arrives with the first password which successfully, I have changed but want to remove.  When it starts to load the administrator that is in a constant loop of Windows didn't load correctly. Restart the computer.  And I fo around and around, I tried everything I found here and many other bulls and still I am unable to make it work.

  I have a Windows 7 disc, but I'm afraid to even try because I was told that resetting to the factory settings would work and it doesn't I don't want to do more damage.

  I noticed that the date was born 00/00/0000 say I'm not sure if it of part of the problem or not

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please contact official HP support in your country / region, via the Portal Support HP's worldwide, to see if the HP recovery support is available for the computer. Software may not be covered by warranty, and there may be fees for the HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Desktop icons and windows taskbar does not load

  My friend has problems with his computer.  Yesterday, his computer was when the power has jumped.  When the power came back and she has restarted his computer, his office without icons or the windows task bar.  She can see his wallpaper and that's it.  Pressing ctrl + Alt + Del is not a task manager.  We can start in safe mode.

  Try to run scandisk on your C: drive. Also the command following command line:

  sfc/scannow

  It will restore system files by default if a file is missing or damaged.

• Windows updates fail to load help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Comments and account standard failed to load

  My dell laptop-1569 win 7 64 bit
  When I try to load comments and standard account, don't charge not bot log off... there in the problem of the OS?

  It looks like their profiles are corrupt.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 6 method that solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, post it here; I'll keep an eye on your question.

  - - - - - -

  To review when you are done to fix the problem - remember to leave comments disabled account and create a user account Standard called visitor with a password set in place that allows you to control which other people have access and that they have access to.