Equium A100 - where to get a new card controller for Hitachi hard disk?

Similar Questions

• Satellite A100: Where to get a Synaptics touchpad driver for Vista?

  Hello

  I just upgraded from Windows XP Home SP2 for Windows Vista Ultimate on my Toshiba Satellite A100.
  I was wondering where I could download a driver for Synaptics touchpad that works?

  I tried the generic drivers from the Synaptics Web site, but they do not completely install it (the second component still fails to install).
  Then I tried those Toshiba Web site, but the Vista compatibility messages show an error that says error code "# 5 b 4 @10.

  Then I tried the drivers compatible with Windows XP, and they work perfectly, except for the fact that I can not configure advanced features like virtual scrolling and tap zones.
  I click the icon in the status bar, click the device settings tab, and every time I click the button nothing happens.

  Any help?

  Hello

  Usually the driver from the Toshiba page should be quite valid and works.
  Please note that there are different series A100 and if you download drivers, don't forget that you choose the correct drivers for the series on the right laptop.

  Have you checked if the touchpad settings can be defined and modified in the control panel?
  As far as I know that the touchpad properties can be set in the mouse option that is located in the Panel!

  On the device settings tab you should the synaptics touchpad and click settings.
  New window will open and you will find many options that control the touchpad settings!

  Good bye

• I had to get a new card mother and lost of Photoshop CS5.

  I had to get a new card mother and lost of Photoshop CS5.

  I'm going to install and, because it is an upgrade, need CS 4 installed. I can not CS4 to start installation. It fails is there a way to get around this?

  You don't need to install CS4, but do not have your serial number CS4 enter when asked

• How can I get a new IP address for my printer on my PC?

  How can I get a new IP address for my printer on my PC?

  Go to printers > click with the right button on the printer in question > printer properties > ports > add new port

  Hope this helps

  P.S..it would be easier to help you if you say what version of Windows you were talking about.

• How can I get a new serial number for my 11 elements that I want to load on my new Hp envy touchsmart pc running Windows 10?

  How can I get a new serial number for my 11 elements that I want to load on my new Hp envy touchsmart pc running Windows 10?

  Hello

  «If you have purchased a license for Photoshop/Premiere elements 11 and saved in (http://adobe.com), that you can sign in here and get the license key of series under "" manage account > Products and Plans > my products "»

  If you purchased a volume for Photoshop/Premiere elements 11 license, then you can connect to Volume Licensing Adobe website (http://licensing.adobe.com/) to access the series to activate license key product. You can access the link as follows to download the installer of Photoshop or Premiere elements 11.

  Download Photoshop Elements | 10, 12, 14, 11, 13

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

  You can also access the link as follows for details how to access the serial key.

  Find the serial number of your Adobe product quickly

  Thank you.

• How can I get a new activation code for Adobe Acrobat 9 pro for my new system? [was: Question]

  How can I get a new activation code for Adobe Acrobat 9 pro for my new system. I own the program and cannot install it. I use it on my old system.

  you just need your serial number and installation files.

  Find the serial number of your Adobe product quickly

• I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

  SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.

  It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.

  So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.

  http://en.wikipedia.org/wiki/S.M.A.R.T.

• Re: Equium L100 186: where to get the new coverage of the top screen

  Hi all

  Please could someone point me in the right direction as to where I could buy a laptop screen for such housing.

  The case split and so have hinges, I tried literally all over the internet without success.
  My screen works absolutely fine but the carter plastic broken and hinges seem to be like gold dust to get the replacement.

  If someone could give me some pointers I'll be eternally gratefull.

  Regards, Trev.

  You can get these parts of an ASP (authorized service provider). Search on the Toshiba site to the nearest:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  The service provider may also share this part because it s a little trickier. Technicians can help you.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Equium A100 - do I need a new battery?

  I have an Equium A100 all of a sudden it has stopped working. I bought a new power adapter, but this does not solve it. If I remove the battery and plug it into the area I get a little flash to power led but while they come out, you think that I need a new battery?

  If the laptop works when it is plugged directly into the sector without the battery inserted?

  I would appreciate your help.

  Hi mate,

  I doubt that a new battery can solve this problem. I want to say normally connected to your laptop AC adapter, you should work correctly, abnormal or even without battery.

  In my opinion it s associated with another party. Maybe it s a problem of motherboard or something else.

  You should ask a technician for laptop help. They can help you to solve this problem and diagnose the reason for this.

• Where to get the new motherboard for Satellite Pro L40 - 14 d

  Hey there.

  I have a Satellite Pro L40 - 14 d (I think).
  My son hit a small stool and he fell on the side of the PCI Express card (which has been inserted).
  Needless to say that the pci card no longer works.

  I opened it to the top, and it seems that the pins were torn off of the motherboard.
  Can it be fixed, I'm not so sure?

  Then someone know where I can get my hands on a new motherboard? I've scanned the internet but come in white.

  See you soon

  Hello

  This model of laptop is fairly new, and I imagine that it will be difficult to get the new motherboard. Of course, you can order one by authorized service provider, but it will be expensive.

  Have you checked eBay? With a little luck, you'll find a L40 with faulty display or any other hardware problem. Maybe using two defective notebooks, you can have one that works correctly. ;)

  By the way: I assume you want to disassemble without maintenance manuals. Be careful!

• Satellite Pro M30 - where to get the new motherboard

  I have a sat SPM30 Pro PSM35E-0023J-FR model with a video fault.
  Anyone know where I could get a new motherboard?

  If anyone has a similar model with other damage that they might want to sell on. All I really need is the motherboard.

  Hello

  New parts can be ordered from the local ASP.
  But be aware that a new motherboard is not good cheap. You will need for a replacement of the mobo 300Euros.
  I think that it s not worth buying a new motherboard because you could add a few Euros and might get a new laptop.

  However, you can view some websites like Ebay for example a satellite M30/Satellite Pro M30 of second hand. Perhaps you could get a second hand mobo

  Good luck

• Satellite U200-160 - Noicy CPU fan - where to get a new

  Anyone know where I can get a new CPU fan?
  Please I'm running the processor power less noise, but the result of this is that the pc is running more slowly than normal.

  Hello

  All the new parts can be ordered from authorized service provider who is responsible for your country.

  I think that guys could order the necessary parts from the filing of Toshiba.
  Then contact the ASP in your country and ask for help

  By the way; If you warranty is valid fan cooling/replacement of the module must be done for free.

  Concerning

• Satellite U500 - where to get a new HARD drive during the warranty?

  Hello world

  I bought my Toshiba Satellite U500 some months in London, and a few days ago my hard drive starts to give me a such difficulties that do not correctly read and given the weird sounds. And finally at boot up to yesterday, its giving me this message "Pri Master hard disk: extended S.M.A.R.T. Status BAD, Backup and replace, press F1 for cont...» »

  Now, I realized that I need a new HD and that one is not usable. What I was wondering, is it possible to keep in touch no matter what service provider Toshiba in order to get the new HD cos this machine is almost brand NEW.

  Can someone give me an advice what to please, it would be much appreciated.

  Thank you

  Hi Edward_4,

  I agree with you. You need a new HARD drive as soon as possible because it s not recommendable to record data on a failed HARD drive.

  In any case, it should t be a problem. You must contact an authorized service provider and explain the situation. Technicians can order a new HARD drive for you and Exchange. This should be free, because your laptop is under warranty so it s age of a few months.

  On the Toshiba site is a list of all s ASP. This seems to be your interlocutor ;)
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Where to get the replacement drive recovery for Satellite 2450

  Hello

  Miss me the recovery for my 2450 disk, anyone know where I can get a replacement?
  It is running a bit slow and you want to re - install XP

  Thank you

  Michael

  Hi Michael

  You didn't check other threads in this category and didn t find the answer. Am I wrong? ;)
  This question has been asked and posted several times here in the forum, however. because you are a new user, I'll try to help you.
  So in general all devices, Toshiba, s CD, etc. can be ordered and purchased from authorized service provider.

  So just to say, communicate with the guys from the services in your country and you will get the new recovery CD :)