Similar Questions

• I have Vista and I can not program to open my Control Panel control or office told me application not found

  I have Vista and I can not program to open my control panel or office

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  You probably have an association bad .exe. Try the fix for this.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• ITunes 12.3.2.35 says it can not connect to the internet, no connection, but my internet works fine.  I installed Windows 7.  Any help?

  I am using windows 7 on my pc.  I just installed the new Itunes, 12.3.2.35, and it does not connect to the internet.  I ran diagnostics and it said that the only test that failed was "secure link to iTunes Store failed.  What could be the problem?

  Thanks for any help.

  Yes, I had the same issue and have also windows 7. Here's what I did to remedy.

  1. go to your Start menu and in the search the bottom type in cmd menu.

  2. right click on cmd at the top of the menu, and then click "Run as Administrator". A black box should appear.

  3. type netsh winsock reset. It should invite you to restart your computer.

  4 restart your computer and then open itunes again.

  I did and now my itunes is on the rise and running and connection to the store. I hope this helps!

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• I placed a time limit on my AirPort Extreme and now I can not access my airport utility to disable, because I can not connect to the Internet?

  Unable to connect due to the delay of access and can not turn off the limit

  Airport the warm reboot... He will return to the default settings for 5 minutes so you can remedy.

• I need to activate a computer but do not have a phone and it does not connect to the internet how to activate it?

  OK, so I have the disc and its application to connect to the internet or call but I don't have a phone and I have another computer. is there anyway that I can activate it online from another computer?

  Please see: How to find a phone number for a Microsoft Product Activation Center

• Have 2 computers and it does not connect to the internet, said we have 2 computers with the same IP address? Help please.

  We have two computers at home. High-speed at & T internet, Belkin Wi Fi and today one of the computers cannot connect to the internet and troubleshoot says we have the same IP address. How can I fix it? They both worked fine until today. Thanks for any help.

  Looks like you need to enable DHCP (Dynamic Host Configuration Program).  Follow these steps:

  -Open the computer in the Start Menu

  -Right click on network

  -Click on Properties

  -Click on to view the status of

  -Click on Properties

  -Click continue if she asks

  -Click Internet Protocol IVP4

  -Click on Properties

  -Turn on to obtain automatically IP addresses and DNS automatically get an address

  -Click OK

  -Close all open windows.

  Do the above on both systems and you should be set.

  Good luck.

• my WMP can not connect to the internet

  When I try to update the album info I get a message saying that I am not connected to the net, although other programs can connect to the net I already clicked on more options > confidentiality > media info updated box net but I always get the error message any help will be appreciated

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         What is the accurate and complete error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:

  Follow the steps described in the following link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 3:

  If the above step disable and enable Windows Media Player to Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off Windows Media Player, click media feature. And uncheck Windows Media Player and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate Windows Media Player and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• browser can not connect to the internet-help!

  Running A Dell 3000 desktop with XP.  After a reasonably stable relationship, my browser does not open an internet connection.  I tried IE and Firefox, neither of which work. When I try to open the browser, I get "connection to the 207.46.250.101 site." and then the browser tells me that it cannot open the web page. Operation of the fine to send and receive Outlook e-mail.

  The connection is through Motorola modem and router D-Link.  My office is connected to the router which is connected to the modem.  Other home computers (wired and wireless) continue to work well on the same modem-router, set up.  Comcast tech support was not able to help.  We went through recycling, ipconfig, ping, etc.  I bypassed the router by attempting a direct connection to the modem - same result.  It seems that the router and modem are in order and the problem seems to be with the office or the software.

  I tried to restore the system to an earlier time when the problem started, which did not help.  I have no restore points more early to get to the system restore.

  I got the following message with attemtps have failed to get on the internet: "Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.  Check the settings of the firewall for the HTTP port (80), HTTPS port (431) and FTP port (21). »

  I have disabled the Windows Firewall.

  Previously, I used zone alarm and uninstalled it, although it seems always on the list Add/Remove programs in Control Panel.  Nothing opens when I double click to open the program.  When I try to remove zonealarm, I get the following message: TrueVector Internet monitor has not been uninstalled.  Uninstall wasn't able to stop the True Vector software services, this will happen if other software uses the true vector engine.  to uninstall zonealarm mare that all other true vector programs have been closed. "I don't know what another program uses TrueVector, or if it has nothing to do with the problem.

  Sorry to be verbose, but it took a lot of time and I wanted to give as much information as possible about the problem.

  any suggestions?  Thank you!

  
  

• I have a xp edition version 2002 family and can not connect to the internet, is it possible to download updates on a different computer to a usb port and transfer updates

  Please could you help me that I am not the most until no one date when irt comes to this. my daughter has a windows xp version 2002 and I can't connect to internet, I know that the computer is dated but I'd like to update the computer, is it possible to download the updates on your part on my computer and transfer bu using a USB

  Hello

  The short answer is almost certainly yes.

  In order to better inform that we will need information from you...

  What is the brand, the range and the model of your PC (or card mother brand and model if a custom build)?

  What service pack are you in?

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section on your service pack level

  Is there any device listed in Device Manager problem?

  • Click Start
  • Click on run
  • Type devmgmt.msc and press enter
  • Search for devices in "Other devices" and devices marked with exclamation point (!) and let us know what they are

  Furthermore, we are not Microsoft, just a collection of individuals from all over the world who can help people like you solve their PC problems.

  Tricky

• I have Vista and I can't download the files at the moment. Tried to install firefox, itunes, get message, Unknown Publisher, and invalid signature

  I tried to connect my iphone to my itunes library. Having trouble then uninstalled everything and I tried to reinstall - kept getting the above error messages.  Don't know what else to do.  Someone suggested below my security setting that I did but still the same error message when downloading.  The process and looks like it is downloading but at the end, said the error message.

  Check out these links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-UAC-allowing-an-unknown-Publisher/6f772103-F42B-47B0-BBDC-becb81f8efff

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/standard-user-account-and-user-account-controls/fbde9586-3244-40be-89bb-666a95fafa25

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/major-Windows-7-bug/2659b564-2c62-4528-9037-8ce03b38a9b3

  http://www.SevenForums.com/system-security/3686-UAC-unknown-Publisher.html