Equium A200 - 26 d keeps putting out of service and there is no virus inside

Similar Questions

• Classic game of MetaLink to put out of service and My Oracle Support to upgrade

  Hello
  in the new version of metalink (in Flash) I see only 2 or 3 of my father the latter in notes 841061.1 it is said:
  Available at entry into service
  
  All open SRs with plenty activities
  15 days of SRs closed with activities of full
  2 years closed only header information SRs
  
  Thanks for the help.

  I was told this:
  /*
  HI - last week team Metalink/MOS sent a communication on future Metalink migration to the new system of support of Orion and asked users to go through a process of pre-registration.

  If you experience problems, you should first contact the assistance, but if you cannot connect to Metalink/MOS to record the request for assistance, you can

  (1) call the Oracle Global Customer Support team at 800-223-1711
  OR
  (2) submit your question use this form of http://apex.oracle.com/pls/otn/f?p=42988:2
  And just to be sure to include the fact that you are an account of Metalink/MOS.

  THX
  */

  Werner

• Equium A200 (PSAE2) am I maxed out here on the memory?

  I was not here for a while especially because my Toshiba Satellite A200 (PSAE2) gave me a perfect working service. Now, I want to upgrade memory because she seems to be the right thing to do in the hungry world memory today. SO currently I have 2GB on board and I can see info on the site here I'm maxed out. I can not install more RAM!

  So how is. Is this a limitation of the BIOS or what? Why can I not install 3 or 4 GB... or can I?

  Thanks in advance for your help and your time

  Hello and welcome back ;)

  Can you please send the name of the exact model of your Toshiba laptop (A200-xxx)?

• Equium L20-198: keyboard forgets to put the letters here and there

  My laptop Toshiba Equium L20-198 plays up. The keyboard sometimes seems to be a bit lazy and forgets to put the letters here and here. It seems to be worse when you type faster; is this a driver problem? If yes where can I update keyboard drivers?

  There seems to be none on the toshiba site. If it is not a driver issue - what is the problem?

  Any ideas anyone?

  Don t think that this issue was caused by a defective keyboard driver.
  I read some of the comments in this forum on similar keyboard problems on different laptops and especially BIOS update has solved a similar question.
  I recommend to check and compare the version of the BIOS of your laptop computer with the version on the Toshiba page.
  If it s a newer version then try to update the BIOS, but be careful!
  Don't forget to use the good BIOS and the proper procedure because wrong BIOS can damage the motherboard.

• I have Toshiba laptop with Windows Vista Home Premium. my cursor keeps going out of control and autour jumps, I'm not very computer and need someone to talk me through any help! ____

  How can I stop my cursor jumping out of control, I have windows vista home premum pack use a touchscreen Tablet

  Hi Mypoppy,

  Exactly when this happens to you (using a particular application or game)?

  The same thing happens if you use an external mouse?

  Contact Toshiba technical support to check if there is no update touch pad software. Follow the link given below to Toshiba support

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 6 s Guard put out of service to remaining battery life

  Hi, I have a problem with my iphone6s stopping completely sometimes when there are nearly 20% and most of the time around 10%.

  When I press the home button it displays the icon of battery empy as if its drained completely. As soon as I plug to recharge the phone starts again and displays the amount of battery as when he died. This seems to happen more. Hope that makes sense. Have tried to reset.

  Yes at one point under autonomy 20% of the load, the device will begin to close. It behaves as designed to prevent damage to it. In a pinch, you can switch to low power Mode (settings app > power low battery Mode), but this will buy you some time. The solution to recharge.

• When I type, or copy and paste a URL in an e-mail message, how can I keep just like a URL and there not create this image with embedded links?

  My question pretty well describes the problem.

  I found a work around. 1 type any letter and then immediately following the letter (without space), type the URL or paste a URL address, and then remove the main letter.

• Autonomous CVP w Reporting. VB Admin out of Service

  CVP 4.1

  Autonomous with reporting model:

  1 GW 3845

  1 MCS 7845 call + VxML Server

  1 MCS 7845 Reporting Server

  1 MCS 7835 OPerations Console

  1 studio of MCS 7835

  I registered online PAK codes for the

  -Server-Sw and applied the ICA on the server to call

  -CVP 20 VxML Ports on the VxML Server 4.x

  -Reporting Prem lic on the report server

  using the operations Console

  Also, added the GW and transferred the CVPSelfService.tcl, the CVPSelfServiceBootStrap.vxml and the CriticalError.wav to the same using the Console.

  Call the server, server VxML and Reporting Server are UP on the Console.

  Have restarted the combo CallServer + Vxml Server, but the speech browser shows out of Service and tries to contact the GK.

  But it is independent, there is no GA, why VB is trying to get a GK?

  I didn't go any single on the VB Admin command, as the configuration guide has not said to me to do.

  First Question:

  1. While installation was SVC Call Server I supposed to select H.323 as Autostart CVP VB services at startup, no. Sytem restart on error display & CVP VB window on startup, or NOT?

  Because I did, but then I added call server in the Console of the operation - I did not any service at all.

  2. If the answer to the above question is that Yes, I had to select H.323 Services/Start VB window etc. during the installation options. Then what don't get me, why the VB is out of service and it is looking for a GA?

  Kindly help.

  No voice browser is required.

  Kind regards

  Geoff

• Equium A200-1V0 keeps freezing

  Hi guys

  I hope that someone can help you. I have a toshiba satellite A200-1V0 which keeps freezing. I'm trying to reload the operating system, but it won't because it freezes. All I can do is power and then turn on the laptop...

  I tried the new hard drive and memory module, but the problem persists. To test if it is overheating, I left the laptop for 24 hours in the BIOS, but it froze so I am well and truly stumped?

  Anyone has any idea what this could be?

  Thank you

  Post edited by: JammyJ_69

  > I am trying to reload the operating system, but it won't because it freezes.
  Can you please explain to us what are you doing exactly and when your laptop freezes?
  In the middle of installing the OS?

• Equium A200-1VO - screen not working no-lines out of feint

  Equium A200-1VO.
  Just got this about 2 months ago and only used it twice and the screen no longer works!
  It looks like its covered in lines of feint. From what I can do on the computer seems to be running ok.

  Any ideas?

  Have you tested the display to the external monitor?

  It might help to know if it s a graphics card or a matter of FL-inverter DC-AC/display.
  If the image appears correctly on the screen so I guess one of the FL-ups parties or internal TFT display of defects and must be replaced.

  But a question;
  Have you tried to update the display driver and BIOS? Check it!

• Equium A200-1V0 using XP - recent conversion issues.

  * Hi, *.

  * I recently inherited my laptop the girls, he had vista installed on it. I'm not a big fan so decided to install xp. I found a great guide on the forum, see below, (the topic is now locked) *.

  The original guide:

  + How to install XP Home on the following Vista laptop. 05/01/08 +.
  + PSAF5E + Toshiba Equium A200-1V0

  + Introduction
  + Here are the measures taken by us to remove our Toshiba laptop Vista and replace it with XP Home. There may be inconsistencies in our methods and we cannot have all the correct drivers installed, but everything seems to work OK for us. +
  + Our laptop now runs much faster, opens and closes more quickly and is more stable. +

  + This isn't a 5 minute operation. It should not be attempted by anyone with only a knowledge of passage of computers because it is very easy to screw things. The shop you bought your PC against them will load a lot to fix things and they will probably insist reinstall Vista! +
  + Be prepared that this would also probably negate your warranty. +

  + Luckily, I have a 2nd PC under XP, which allows me to access the web. This is very useful because it means that when your Vista machine is "broken" you can always find help and download the driver files. I also used my 2nd PC to create the XP installation updated the CD discussed later. +
  + You must have access to the web via a PC or another to get the necessary drivers. +

  + Method +.
  + First, even if you have Vista on your laptop, download and run a program of interrogation as "Belarc advisor" that lists all the drivers and software installed on your laptop. Print it out for future reference. It will be useful later when searching on the web for all drivers that may require updating. +
  + Now, make sure that you noted on all the necessary settings for your Internet connection. +
  + Also, back up the files that you may have placed on the hard drive you will lose the lot, including emails and the address books and web bookmarks etc. +

  + Unfortunately, the Toshiba disk that comes with this laptop does not appear to have all the required drivers with it. Instead, I think it relies on Vista keeping copy on your hard drive. It's not very bright that when the disk fails, you have lost everything! +
  + This means to go on the web and the search of all the required drivers run the XP successfully. +
  + Some we have found, for example the wireless network adapter, however this was not a problem because once we had installed XP and connected to the Internet through an Ethernet cable to our router, we were able to run 'Update Driver' for each missing item. +
  + Go to "Device Manager" via "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +
  + The ones we made in this way were: wireless adapter, Audio adapter. +

  + Unfortunately an original CD of XP SP2 does not contain the required drivers for this laptop. Therefore, when you start the CD it will be, after a few minutes of installation of files, say you have a hardware problem, there is no hard drive. +
  + To remedy this, you will need to download the right drivers Intel ICH8M SATA AHCI Controller. I could not find on the website of Intel, but on the contrary searched on Google for him. and he got to: http://www.alphadownloads.com/downloads/download-hp-intel-sata-ahci-controller-driver-ver--d-3064.html+

  + The other necessary drivers that we found on the web were: +.

  + Intel chipset device software installer +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=816&DwnldID=14528 & strOSs = 45 & OSFullName = Windows * XP Home Edition & lang = eng +.

  + Or if this link does not try this: +.

  + http://support.intel.com/support/chipsets/inf/sb/CS-021273.htm+

  + Select 'Download Intel chipset software installation utility' on the left side, and then select your operating system "XP Home +.
  + Select "INF Update Utility - primarily for Intel 3, 900 chipset series ' +.
  + and download it. +

  + Driver Intel graphics: Mobile Intel (r) 965 Express Chipset +.
  Web page +.
  + http://downloadcenter.intel.com/Detail_Desc.aspx?agr=N&ProductID=2800&DwnldID=1438 8 & strOSs = 45 & OSFullName = Windows * % 20XP % 20Home % 20Edit ion & lang = eng +.

  + Or if this link does not try this: +.
  + http://support.intel.com/support/graphics/intelgm965/+

  + Now, select "software & drivers" on the left side and select your operating system "XP Home +.
  + You will be presented with a list of files. +
  + Select provided? ® Graphics Media Accelerator Driver for Windows * XP (exe) +.
  + and download it. +

  + Marvell Yukon Ethernet Driver +.
  Web page +.
  + http://www.marvell.com/drivers/driverDisplay.do?dId=175+

  + Or if this link does not try this: +.
  + http://www.marvell.com/drivers/search.do?reload=false+
  + On the right side, select ' W2000 / XP/2003/Vista x 86 & x 64 multilingual Installer (32-bit and 64-bit) for Yukon devices +.

  + Create the XP drivers disk +.
  + Add SATA drivers for a copy of your XP install CD using a program such as NLite. +
  + You have enough spare memory hard drive take a copy of your XP (about 700 MB) installation CD. +
  + Launch the program "sp37005.exe" and it will install on your hard drive. Do not install to a floppy disk. +
  + Download "NLite" of: http://www.nliteos.com/download.html+
  + When you run NLite it will probably say that you need to install ".net Framework", if so, quit NLite and go find the program. It is a Microsoft program that you can find by performing a Google search for the corresponding page on the Microsoft Web site. +
  + Now place your drive to install XP in your CD drive, if it autoruns, leave him. +
  + Run Nlite and follow the instructions on the screen. +
  + The program will ask where is your XP disk then it will ask you where you want to save the copy. +
  + On the screen "Task Selection", select "Drivers" and "Bootable ISO". Press "next". +
  + Select "Insert" and then "Folder pilot several" and now go and find your downloaded files of the SATA driver. Now, select 'All' and ' OK. The program will list the available SATA drivers. Select only the two that mention "ICH8M. Now press "next". The display will show the selected drivers. Press 'Next' and then 'Yes' to the prompt and then on "next" when done.
  + You are presented with the "Bootable ISO" screen. +
  + Put it a new inflammable CD in your CD burner, wait for it to be recognized and out any window that might appear to allow you to install files.
  + Now in Nlite, under "Mode", select "Direct Burn" +.
  + Under the 'Label' enter something like "XP for Toshiba Satellite A200" to identify the drive. +
  + Advanced settings to leave alone and now add the other required drivers by clicking on explore and copy them to the root directory to the temporary directory on your hard drive XP. It might be better to create a "Drivers" folder in the root directory to make them easy to find later. +
  + Now, click on the "Burn" button Now follow the remaining instructions to complete. +
  + You have now created an XP installation disc that contains your SATA drivers. +
  + - As you can tell, it of sound altogether, but avoids having to buy a USB floppy drive and it provides a neat solution. +

  + Hasta La Vista! +
  + Now you are ready to start the cleaning process, if you are brave enough to continue... +.

  + First, re-boot your laptop and the all start-up press F12 to change the boot order so that the CD-ROM/DVD-ROM is first. You can also use F2 and then change the Boot order from there. +

  + Now, insert your new XP installation disc in the DVD/CD drive and re-boot the PC, select boot from CD when you are prompted. +

  + The XP CD will now start copying the files and possibly display an options screen.
  + Select this option to install Windows. +
  + And then remove the hard drive C: partition (with Vista on) +.
  + Delete the partition used by Vista also F. +.
  + You will have to follow a lot of warning messages to delete the partitions. +
  + Now follow the instructions to create an NTFS partition on the C drive. +.
  + Now install XP by following the instructions. +

  + Don't worry that the graphics are a bit large as once Windows has finished installing, you can run the graphics driver you copied on the the XP CD to correct this. +

  + Run three driver files: +.
  + win2k_xp14311.exe Intel graphics driver.
  + INFINST_AUTOL.exe Intel chipset software installation utility ' +.
  + Marvell Yukon Ethernet Driver Setup.exe +.

  + Your graphics card must now improve and you should now be able to connect to the web (after the execution of the web Setup Wizard). But do not do this until you have installed your anti-virus software and firewall. +

  + Now go to "Device Manager" by "Control Panel" then "System" and then "hardware". Then look for any yellow question mark for all the problems. Right-click and run 'Update Driver' for the Hardware Update Wizard and allow the PC to search the web "this time only. +

  + If all goes well, everything should work OK now. +

  + Now go and have a drink to celebrate! +

  * After completing the installation, I found that I had no work wlan driver on my laptop. They are here (RTL8187B_WLAN_Adaptor), but with a big yellow question mark. I tried reinstalling them but it made no difference. I don't know why they don't will be will not installed properly.*

  * All went well and seem to work and all the familiar screens were there. I started using it and wanted to transfer some info from the laptop to my office. I copied the files on a disc using Ashampoo Burning Studio 7 and it seems to work, he went through the whole process without a hitch. When he had finished I checked the drive and it was empty he had no files on it at all. I tried several types/brands but the results (or lack of) is the same. The drive reads the discs will not drive write. Any ideas? *

  Thanks for reading this and I would appreciate any help/advice you may have.

  See you soon,.

  Mike

  Hello

  This means that everything is working properly without WLAN connection and burning the discs?

  Well, are you sure that your laptop is equipped with RTL8187B WLAN card? Therefore, you can check the vendor and device ID in Device Manager.
  But for all the portable Toshiba, you can download the driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, it would be interesting to know which drive you exactly used for the engraving process. I only use high-quality Verbatim and TDK media. I don t use Ashampoo or Nero, I use CD Burner XP because it the freeware tool and I can do anything I want with this program.

  Check it!

• Equium A200 - upgrade CPU

  Hi all

  I have an Equium A200 T2310 and looking to improve it instead of having to splash out for a new laptop.
  A Crucial report told me my 2 GB RAM was at its maximum, but after some research, I discovered that it will recognize up to 3.5 GB and so have put n 1 extra GB she fine rocognised.

  Another option I'm considering is to buy an SSD that I recently discovered can replace the cd drive and give me two hard drives.

  The question I want to ask regarding my processor is an Intel Pentium T2310.
  I read the thread below this site where someone updated the CPU to an Intel Core Duo T7500.
  At the end of the post, they claim it works, but there is no follow-up if she continued to work.

  I would like to comment on the question of whether people think it will work without causing problems or if they know if any CPU would be more appropriate.

  Another processor that I am considering is the Intel Pentium Dual core T3400, which is not as good, but seems to be closest matches.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=204735𱾿

  Any help on this is greatly appreciated

  I have some comparisons of these processors and some statistics from the computer I wanted to download, but I'm not sure how. Anyone know if this is possible?

  First of all, you cannot take any CPU. It must be supported by the chipset.
  If the chipset would not support the CPU, there is NO change to make it work.

  So first of all all the it is essential to check the compatibility and the chipset.

  However, there are different satellites / Equium A200 models on the market with different hardware configurations.

  The laptops were equipped with one of the following chipsets:

  Mobile Intel 945 PM Express Chipset
  Mobile Intel Express Chipset 945GM
  Mobile Intel Express Chipset 943GML

  and following CPUs:

  Intel® Core 2 Duo Processor
  Intel® Core Duo processor
  Processor Intel Pentium Dual Core
  Processor Intel® Celeron M

  If you would be able to choose a compatible CPU among the categories listed.

• Equium A200: Unable to connect to the Wlan - no IP address of the router

  Dear readers

  I have a laptop Equium A200 Toshiba.
  I TI a year, a little more of it and it did work under Vista perfectly, no problem.

  First of a sudded 4 weeks ago my wife told me that she can no longer connect to the internet.
  I thought that it was something less serious, until I couldn't solve the problem.

  The laptop is not receiving an IP address wireless or cable modem.
  I type cmd and I get an IP starting with 169 in wireless and wireed cases.
  I also tried to reset the NETWORK card, but it does not work.

  It's frustrating seriously because we don't change anything on the other machine, then let updates automatically, this is obviously some update that triggered connect to stop the local distribution of load and internet access now it shows only local access.

  Appreciate any help out there on root causes.
  So far not much dad worked. R/Paulcou

  Hello

  In your case, I would first check the settings of the router.
  I put t know what settings of your router is compatible, but you should go thought the simple options (such as when the first router configuration) and should check if everything is set correctly.

  In addition, you should check the settings of WLan connection. In the properties of WLan connection, you would find the TCP/IP protocol. Check the properties of the TCP/IP Protocol and set all parameters (IP address, getaway, etc.) to get automatically.

  If all of these settings are set correctly, then start the console (CMD) and use the command:
  ipconfig / renew

  This should refresh the IP address and in most cases, it helps.

  Last but not least, you should check if you can update the WLan driver!

• Cannot install Windows XP on Equium A200

  Hello

  I uninstalled vista on my laptop Equium A200. My idea was (a popular) to uninstall vista and XP, get rid of the unstable operating system (sorry, personal opinion)

  Of course the XP installation noted that I have no disks on my pc. I got the SATA drivers, purchased an external floppy and F6'ed my path to the windows install. I needed to manually edit files on my floppy drive, so that the installation of the OS would find the drivers as well. I got through the complete installation, when she saves the settings in the very fine tip, it restarts automatically (I don't remember if XP was supposed to do by default, anyway) when the system starts up once again, it appears the blue screen of death of about 0.5 seconds and restarts.

  Now, I also had a disk with nlite, so drivers were there so I tried this and everything was the same (I don't need my way through installation F6) and the last blue screen of death pointed out that there is once again a problem with my HARD drive and I have to check for viruses.

  I am of ideas at the moment. I don't want to take it back to the shop cause, that they will probably charge me for it and still put vista.

  any ideas?

  Thanks in advance

  The XP installation should be possible. Don t see serious reasons why the XP shouldn't t run on your A200 Equium.

  As you know the driver SATA (Intel Matrix Storage Manager) must be included during execution of the XP installation

  It is very important that you install a XP with SP2!
  Win XP without the XP2 may makes problems

  Greetings

• Equium A200-Vista repair always at boot

  Dear all,

  This is my first time in the forums and I need help.
  I have a computer Equium A200 laptop running Windows Vista 32. Recently, I got a malware problem and my only recourse was to erase everything and use the Toshiba Recovery disk that was provided.

  I reinstalled and the computer restarted without any problem... However if I stop completely for a short time, when the machine starts again the Windows Startup Repair keeps operating. I have let it run its course, but it never actually repairs anything. I even wiped all new just ran the recovery disc that put on the basis of windows vista, closed the machine for about a minute and then he did it again, windows startup repair yes returned.

  My bios is the latest version and I ran a test on the memory and hard drive... all diagnoses appear correct.

  My laptop is still under warranty.

  Can anyone help please?

  Thank you
  Ray

  Hi dude

  Your question is really strange to be honest I have never seen anything like it.
  Of course, the repair function on Vista is known to me and my repaired the system Vista in the past too, but this doesn t always appear at the start of the laptop.

  However, I imagine that this issue has something to do with your system and you should first try to clean with the CCleaner. It is a free tool and it repairs the operating system and the registry.

  More upgrade Vista to the last State. Install SP1 and all other updates.
  Maybe it helps!

  Good luck