Equium A210 automatically stops & what is the Configuration of HW Toshiba icon?

To start the Toshiba Utilities, I had to click on the Toshiba HW Setup icon on my control panel. There is no such thing on mine. What is the point of decompression mounted and utlilties to my folder 'Unzipped' if they will just stay there?

Also my A210 Equum keeps closing by itself after a few hours of use, and I lose everything that I'm trying. Why is this? I only got 2 months.
Pete

Hello

Toshiba HWSetup that you can find in the assistance of Toshiba.
This Toshiba support must be placed on your desktop.

Reading your shutdown problem;
Maybe the laptop overheating because the temperature inside the laptop.
Especially, the temperature rises to a higher level because don t cooling modules run faster because of the dust and debris
I have this case you will need to clean the fans with a jet of compressed air that is.

Another problem could be the circulation of fresh air, please make sure that the vents are always free and that there is enough free space around the laptop for an air flow correctly

Best regards

Tags: Toshiba

Similar Questions

  • What is the configuration of the maximum ram for a 2007 iMac 21,5 "

    What is the configuration of the maximum ram for a 2007 iMac 21,5 "

    There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

    (141476)

  • Equium A210-1as turns off during the Bios flash

    Hello group,

    My computer laptop girls off for a flash bios because of blocked fan (dog hairs dust etc.) and its fried bios chip.
    I think that there is a partition on the Bios chip which can upgrade the bios in a critical state of flash using combinations of keys.

    I tried all of this and have a laptop dead yet.
    I contacted someone on the net that sells preloaded Bios chips and instructions to replace them, but I must first of all identify the chip on the card.
    Is there any reading that can identify it for me on a toshiba Equium A210-1as... psafje-005005ks

    Thanks for any help Paul G...

    Hi mate

    Usually it s is not necessary to replace the BIOS ROM chip on the motherboard.
    In most cases, the ROM module has to be reflashed again.
    It seems that the module ROM was not properly flashed and the process interrupted
    The technician of the ASP can reflash the module using a disc of the BIOS crisis.

    I recommend you to get in touch with the guys from the ASP in your country and ask reflash BIOSES.

    Good luck

  • Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

    Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

    What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

    Gives memory crucial me this module - is that correct?
    http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

    Found, via the Kingstons site - is this okay?
    http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

    Would be really grateful for official clarification here.

    Thank you very much

    It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

    In any case I recommend to buy products of high quality like Kingston modules.

  • What is the part number for Toshiba for Satellite Pro L20

    Morning

    Anyone happen to know the part number for Toshiba Satellite Pro L20? I seem to have misplaced mine.

    Thank you
    If

    Hello

    I put t know what number you mean exactly, but there are several different models of Satellite Pro L20 what different numbers.
    All the necessary details and all the serial numbers, you will find on the label that was placed at the bottom of the unit. Please check this box.

    If you need these details for the part order or recovery cd, you must contact the after-sales Service of Toshiba partner. Here, you can order parts all supported.

  • What is the meaning of this notification icon?

    like the topic, what is the meaning of the icon not to mention that the wifi?

    Thank you

    Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

    This is the icon for device hearing aid compatibility under settings-> settings of call-> hearing aids.

  • What is the guarantee of a "Toshiba" of my HP laptop hard drive?

    I bought my laptop HP Pavilion DV7-1175NR 12/10/08.  Recently, I noticed that my laptop works really slow, and the hard drive LED remains on permanently.  With the help of the reader of the window self test, it was determined that "hard disk 1 must be replaced.  Because I was not able to wait, I went out and bought a new drive.  I had to install everything from scratch, but with the new player my laptop computer functions very well now.  However, I would like to know what is the warranty on the drive dead?  I know that Seagate offers a warrantly on all its products from hard drive of 5 years.  Site Web of Toshiba said if one of its components (e.g. hard drive) are part of the device from another manufacturer (for example, laptop), I'll need to contact the manufacturer (HP).  So, that can make HP on my hard drive?

    Hard to predict by all OEMs such as HP, Dell, etc. are not covered by the standard warranty available on commercial versions. The hard drive is covered by the OEM under the standard 1 year warranty, except if you buy the extended warranty which may be for 1-2 years more.

  • What is the best way to download icons I created on illustrator on a file photoshop of a Web site design?

    I currently trying to design a website on Photoshop. I designed a few icons for the Web site using Illustrator. What is the best way to download these icons on the photoshop file and keep them looking for crisp and high quality? I tried a number of ways, but all seem to come out pixelated.

    What you need to do is to ensure that you create the icons the PPIS and the Photoshop document Illustrator and true to size. If you have created the icons tell with 300ppi, but are in pixels it do not have the same properties that the Web site that you create if that was put in place as 72 dpi and so will distort.

    Once you have mastered that you are better (if you think that there may be changes to the icons later down the line) to create each icon .ai files and place them intt the Photoshop document, and then if you make changes to the source .ai file that it will update in the design of Web sites you.

    If you see no icons change then you can always just copy and paste directly from Illustrator, Photoshop and make changes on the fly, ensuring that keep you it as a smart object.

  • Equium A60 BIOS update: what is the Boot Mode?

    Due to problems with my graphics ATI I have to do a BIOS update. To do my computer (Equium A60 PSA67E) apparently needs to be in mode 'start-up', NOT 'repeat mode '. In a previously sent forum somebody said the computer just "should be turned off" but I'm still not sure of how go to this mode. Is it just a case to go to the start menu, click on shut down the computer and turn off the computer again? But how do you know when it is in mode 'start '?
    Question: How do in boot mode? (I tried the update in 'safe' mode and it does not work)

    Hello

    Boot mode is meaning stop the laptop (BONE).
    It is important that the laptop is not in stand mode or hibernation mode.
    You just simply close the unit. That s all ;)

  • LR to read the metadata of the file, automatically or manually all the configuration files

    Hello

    I would like to know how to configure LR for the following use cases:

    1. Read the metadata from all the photo files once.
    2. Always read all files, so "to start" stage, on a regular or - ideally - on basis of evolution into a file.

    I already know how to "read metadata" for individual or selected, files but my questions are in regards to pictures of my catalog.

    Another way to look at this is: how to select all the images? Is it possible to say to LR to read the metadata for the selected images and apply "import disc settings' as the default for conflicts?

    I don't understand what some of the implications of are, as a decline in performance in the section files/XMP metadata are only a subset of the LR metadata keeps in the catalog, for example flags, the collection members, develop the story, etc. are all not stored in XMP as I understand it - and it's good for me.

    All my files are JPG or TIFF, so the XMP section is contained in the files, not in separate sidecar XMP files. On my file system my photos are usually organized in a folder structure as follows: J:\Pictures\Year\Month\Event.

    Thank you very much!

    Stefan

    1. Select all Photos (click on all of the photographs, turn off filters, expand all the batteries, then Ctrl + A) then the metadata-> read metadata from files

    2. cannot be done. Reading metadata from files must be started manually.

  • Equium A210-1AS: how to upgrade the graphics card from 128 MB to 256 MB

    Hello

    can someone tell me how to upgrade the graphics card 128 MB to 256 MB on the Satellite A210-1as... thx

    Hello

    Update graphics card is not possible.
    The GPU chip is soldered on the Board and it of not possible to remove the sleeve.

    Good bye

  • Can I please talk to someone to find out if my account has been closed, payment has not been made (supposedly automatic) or what is the problem? This is getting ridiculous. Someone should be available to answer simple questions.

    How many times should we post a message until someone recognizes them? It's the fourth time I had to write a message and I have not yet been recognized.

    Since this is an open forum, not Adobe support... you must contact Adobe to help staff
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Question the button of Windows Hotstart - Equium A210

    Can someone enlighten me on the 6 multimedia keys above the keyboard of my laptop Equium A210? I already had from another portable non-Toshiba which had a similar set up. In an engine off the coast of the State, if I pressed the multimedia button, windows media Center started without having to start the full operating system.

    With my satellite notebook, if I press the multimedia keys, media center application or the application of internet explorer opens but only after a full system startup. Is there anyway that my satellite can be changed so that when I press the media button - only the media Center starts and not whatever!

    Thank you

    Hello

    > With my satellite notebook, if I press the multimedia keys, the library of application or the application of internet explorer opens but only after a full system startup. Is there anyway that my satellite can be changed so that when I press the media button - only the media Center starts and not whatever!

    This is right. The controls buttons Toshiba Launches the Windows media player or other applications like IE once Windows has finished loading.

    Like some other Toshiba Qosmio series laptops or another series is delivered and equipped with the Qosmio player or Express Media Player.
    These players can be looked at separately, without having to start Notepad in Windows operating system.

    But your Equium doesn t takes care of the players.

    Best regards

  • Equium A210-17i does not supply power to the top only with the power adapter plugged

    Equium A210-17i turn on when the battery is missing, but the laptop is set to the power supply dc?

    I have a dead battery and the laptop does not light with or without the battery inserted.
    The food came out 19v as it is supposed to.

    Also no led lights on the laptop when the power is connected and there is no sign of life at all by pressing power buttun.

    Thanks for any response.

    Hello

    The laptop must also lights up if the battery is not inserted.
    If the adapter is ok and if it s connected to the laptop, then the power led should be lit and it should light up.
    This led indicates that AC adapter provides power to the laptop properly.

    But if the LED turns OFF then that would mean that there is no power, and in this case the laptop will not turn on.

  • HP Probook 450 G1: What is the compatible RAM configuration for my laptop?

    Product number: F6B14PA ##ACJ

    Serial number: (deleted content)

    I'm from the India. I need to upgrade the RAM for my laptop. I'm looking for 4 GB of RAM of 4 GB existing upgradation. I need while seeking in the online market. What is the configuration of my laptop RAM. I need help for that matter. Please help me.

    Another issue is that there will be no problem if there are different volts at the two RAMS cards in slots

    If you associate brands and densities (single and double face) then you run in a greater chance of the laptop won't start.

    That is why it is deemed be advised to always identical (in all respects) modules when you upgrade memory in a laptop ofr desktop PC.

Maybe you are looking for

  • Jelly Bean Droid RAZR/RAZR MAXX tips/tricks

    Please report any tips/tricks on this update of the OS. Hope you enjoy this delicious treat. I've update Of RAZR FAQ page soon so please leave comments on this thread if you would like that I add something. Allows you to see what your phone has now t

  • Control is not found in Mathscript

    Hi, when I opened the window Mathscript in LabVIEW, there's a pop saying "Error1172...". "I opened the window of Mathscript anyway and I clicked on"script"at the top right of the page. There is a sentence in red saying "control could not be loaded."C

  • HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Windows 10 drivers

    Hello Windows 10 is coming and I was wondering that Laserjet Pro P1102w will have 10 windows drivers? The printer is currently connected to the wireless network. -Marko-

  • Why do so many files broken in XP?

    every day, I get a lot of fragmented files. is there a way to stop this?

  • Cannot transfer files between multiple PCs.

    I have 4 PCs; One with Windows 7, two with Windows Vista and one with XP.  I want to be able to transfer files between all four of the PC.  90% of the time, the Windows 7 and Vista systems cannot see the XP system in their network lists in the file E