Equium L350 - 10L - Windows install without floppy USB drive

Similar Questions

• Impossible to install Win2003 Server to dualboot with Vista on Equium L350 - 10L

  Hello
  I have Windows Vista preinstalled on my Equium L350 - 10L. I wanted to install Windows 2003 server on another partition in order to dual boot between the 2 operating systems. When I start with the install of Win2003 CD and access the Setup screen, I get the following error: «Setup didn't find any hard drives installed in your computer» I'm assuming (correct me if I'm wrong) I have need to install the drivers for the SATA controller during the installation when he says "press F6 to install 3 pary SCSI or RAID drivers. I have two problems: 1. I can't find the drivers for the SATA for EQUIUM L350 - 10 L controller, 2. the laptop is not a floppy drive - which is the only way to install drivers during installation. Helpful suggestions and solutions would be greatly appreciated. Thanks in advance.

  Hello

  It is important to doesn´t if toshiba does not explicitly have the F6Floppy drivers for your machine. You can go to www.intel.com and download the drivers from F6Floppy from there.

  On the issue of the 'no-floppy", you can easily find a way just in slipstreaming with nlite for self made Win2003 Server drivers CD.

  To learn more about "slipstreaming" CD with nLite, simply type 'Nlite slipstream XP ICHM8' or some of these words in google and you will find all THE answers. Or you use the forum search and find only 10000 messages on this slipstreaming with nlite, etc...

  Welcome them

• Equium L350 - 10L: how to make dualboot - Vista and XP

  I need help.

  How could I install an operating system of Windows XP and all keeping my Windows Vista.
  It's like having two operating systems in one.

  My laptop model is Toshiba Equium L350 - 10L.

  Thank you.

  Best regards

  Carol

  Hello Carol

  Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

  On this forum, you will find number of threads with the exact description how do.

  At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

  If you have any other questions please post again.

• Need driver SATA XP for Equium L350 - 10L PSLD2E

  Hello

  I have a laptop Toshiba Equium L350 - 10L PSLD2E and want to downgrade the XP operating system.
  I have an XP license and have tried to install XP but I need an F6 driver as the windows install is not recognized the hard drive, so not be able to install.

  Anyone know how I can get the driver.

  Thank you very much

  Hi Simon

  I m your man dude ;) I think I can help you.

  You need a SATA driver for new generation mobile phones are equipped with controllers SATA HDD, which needs a SATA driver.
  The key is the Intel Storage Manager.

  It contains the SATA driver for different Intel chipsets.

  I found the compatible driver here in page Intel:

  [Intel® Matrix Storage Manager: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go % 21]

  You must choose the * 32-bit floppy Configuration Utility for Intel Matrix Storage Manager *.

  It is a driver that can be included by using the F6 key during the installation of Win XP.

• Equium L350 - 10L - where can I find the right driver WLAN?

  Hello

  I changed my windows, so I need to install the driver for my Toshiba Equium L350 - 10L Wlan. I downloaded all the drivers from the Web from Toshiba site, but it is still showing this missing Ethernet controller.

  Can someone help me solve this problem?

  Thank you.

  Hello

  Are you sure that it s the WLAN card?
  Ethernet controller could also be the normal LAN card.

  Here, you can check which driver you need:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can check in-online properties of the Ethernet controller device manager. You should find something like VEN_xxxx & DEV_xxxx

  After that, you can download the appropriate driver.

  Welcome them

• Re: Equium L350 - 10L - start with battery power

  I just bought an Equium L350 - 10L. When he arrived, he has been turned on using the battery and started installing Windows. However, the battery expired and I can't cross the message of "close unexpectedly" even after reboot.

  How can I go back to square one and restart the installation process? Advice.

  Oh buddy, a stupid idea. I really do not understand you. After several weeks or months in the box, maybe it makes sense that the battery cannot run with full capacity.

  In any case, connect your laptop to power supply and leave it for a while. Departure for laptop to see what will happen. If the installation process can not be finished early new laptop computer and immediately press F8. First option to choose repair my computer and follow the on-screen menu. The OS will be installed again and you will be able to complete the operating system installation process.

• Equium L350 - 10L - memory upgrade question

  Hello

  I have the Equium L350 - 10L. Is it possible to upgrade the memory on my laptop. For the moment, it has 2GB (2x1GB).

  Thank you

  Of course you can upgrade the RAM.
  Did you look in the manual that was stored on the laptop?
  I think that you should do this it can you did many details, photos and any other information regarding the upgrade of RAM.

  Check the memory extension Chapter 8 option aircraft.

  In addition, you should know that if you would upgrade the RAM to 4 GB then your 32-bit Windows system will see ONLY 3.2 GB.
  So if you want to use full 4 GB, you will need to change the operating system to 64-bit.

  In my opinion, 3 GB of RAM are more than enough

• SA30-414 boot from the floppy USB drive

  Hi all!

  I'm tryin to get my my satellite A30-414 to boot from the floppy USB drive and enter the dos mode, but all I get is a black screen (without a slider, of course!), and then the windows XP login page directly. Can you tell me if this model has a boot device menu shortcut keyboard?

  Also, I may be permanently changed some configurations of starting (to know by pressing F12 at startup, then press F2 to try later) with my attempts to get the machine to boot from the floppy drive: now even when the floppy drive is not connected, I get this black screen awkward and then, after a few seconds, the logon windows page. How do I access the Setup menu and check?

  Thank you in advance for your help!

  Hello

  You can access the start menu by pressing the F2 key during the boot process. This will take you in the "setup" menu where you can change the order of selection of boot device as well as the other BIOS settings permanently.

  Kind regards

• How to move the original system to the SSD newly installed without an optical drive?

  I want to buy a W530 and spare SSD upgrade.

  I want to order one without a DVD player.

  How to move the system of origin, drivers and other software for the SSD newly installed without an optical drive?

  Hope someone could help me. Thank you.

  The two utilities that I mentioned manage alignment automatically. Also, I photographed my hard drive, then restored the SSD. I have no clone, which means a direct copy of the HDD to the SSD.

  I just went through this myself in July, using Acronis True Image 2012 to get my existing on my 256 GB SSD mSATA HARD disk image. It worked like a charm. I checked that the SSD has been properly aligned.

  See:

  Migrate to SSD

  and:

  Check the alignment of SSD

  Now stop worrying!

• Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

  History:

  I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

  IV ' e read on the internet that I need Intel storage driver manager...

  IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

  I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

  The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

  How can I make it work? It is that I can get.

  I DON'T WANT BACK TO VISTA - HELP!

  This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

  However, worry guy. I have a solution ;) (jeaaa: D)

  Try to create a new XP CD using the software called nLite!
  Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

  For details and how to use the nLite please Google because there are a lot of useful Web sites.

  Good bye

• Will NOT feed Equium L350 - 10L

  Hello

  I have a Satellite L350 - 10L laptop and for some reason any it will not feed.
  I tried to turn on without the battery and still no luck.

  Can someone help me please?

  I put t really know how to help her in this situation.
  Remove the battery, connect the power supply current and try to start it.

  If there is no sign of life I assume electronic power supply is defective.

  You can not force laptop to start if there is no reaction.

• Downgrade from Vista to XP on Equium L350 - 10L

  Hey guys this is my first post here. I searched everywhere but can't seem to find the information or help that I want.

  Here's the question. I have the * satellite Toshiba L350 - 10L. (PSLB2E) *, I bought last week and I really hate Vista that comes with the machine. I also have XP Pro and I want to put this on the machine instead of use the preinstalled Vista.

  Problem is that I can't find the XP drivers available here to use once I put XP on the computer.

  Anyone know it if they are available and if so where can I get them?

  In addition it is possible to use the drivers vista on XP or if they will not work. I won't try to install XP until I have all the correct drivers. I tried to find this info anywhere and nothing helped. Certainly, demand for XP should toshibe free drivers. I see other people the same questions, but to different machines and I'm wondering are they available for my specific machine.

  In this guys any help would be greatly appreciated, or even advice to if Im barking an incredibly bad tree.

  Once again thanks in advance people

  Hey Buddy

  I was in the same boat with my series of Satellite A. I bought my laptop with Vista pre-installed too, and like most of us, I installed the XP

  The problem was that it had no XP drivers.

  So I ve searched a bit on the European driver Toshiba page and I used the series laptop drivers different

  Still many laptop series uses the same hardware devices and also the drivers would be functions too

  Check just. it worth a try.

  PS: I m ensure that drivers Toshiba of origin should be released in the next time don t lose patience ;)

• Equium L350 - 10L PSLD2E: FN + F6 does not work under Win XP

  Hello

  I have a laptop Satellite L350 - 10L PSLD2E and just have it downgraded to XP of the original Vista.

  I have all the drivers set up were needed, that didn't they no yellow question mark in Device Manager.

  My problem is that I can't change the properties of the screen.
  The screen is high heat and using the button with number F6 FN does not bring the brightness.

  All the options of the FN do not work.

  Anyone can guide me please to sort it?

  Thank you very much

  Hello

  Have you installed the common Module and Hotkey Utility?

  The common Module software is an essential element for the use of the FN button.

  It should be installed first

  Please download and reinstall. In my view, this should allows to get the functionality of the FN button.

  See you soon

• format and install windows xp without cd rom drive

  I want to format my laptop and install windows xp but I have not cd player rom. someone can tell me how to format and install without using a cd rom?

  Hi x zero90.

  I answered your post located in the link below. Please respond to this post.

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/647034ad-1ffa-4031-9b16-0696fcb29bc9

  Thank you!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Partition of hard disk for Equium L350 - 10L

  Hello

  I am a new owner of a L350 - 10L. Loading the files from the laptop, I was told that I had run out of space. Investigate a bit more it seems I drive hard havea partitioned. I think that I expect that the "valorisation" of files are stored on the hard drive. But the size of the partition seems a little odd to me. The disc has a pertition to Vista and a called E:\Data being 54.5 GB in size.

  Question - can I safely reformat the hard drive? Should I run the Setup again. This seems a bit odd. Is there a reason for the size of partition?

  Kind regards
  Paul

  Hello
  I have the same laptop. Download GParted LiveCD and boot inside. Then resize partition D:\ lower then resize the partition above C:\ with unallocated space. Is not wipe your data.

  Hope this helps,
  Jonty