Equium M50-192: no sound from speakers or headphones

Similar Questions

• NO sound from speakers or headphones

  HP ENVY 15-3033cl laptop PC

  Windows 7 64 bit

  no error message, I was watching a movie when my laptop died. I plugged it into the power source and now there is no sound from speakers or headphones when I plug. I already went through the troubleshooting steps sound but it says there is no problem detected by the device. The computer is still failry new less than a year, but lies outside of the 90 day warranty. Help please.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop and perform a "Hard Reset" for your model, as described in the document of HP here.

  One when you're done, press next to the key ESC that you start the computer to launch the Start Menu, then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Satellite A200-1AE: sound from speakers when headphones are connected

  Hello. Sorry for my English.

  I have problem when I started a player (winamp player or a movie or a game with the sound) and I want to change the sound from the speaker to the helmet by plug them into the headphone jack. The sound is still speaker.

  So I just restart this player or the game and then sound is switched to the headphones.

  So in sum up: when I want to listen to the sound of some player I have to plug in headphones first and then start the player in order reverse, the sound is not switched to the helmet line.

  In other laptops with Vista I have check this problem is not to happen.
  Do you have any suggestions?

  Hello Pawel

  I have the Satellite A200 too preinstalled with recovery DVDs. I was very curious and I tested it on my laptop. In my case everything was OK. Through the use of headphones, Laptop speakers are automatically TURNED off. Remove helmet speakers work again.

  I am really confused, and it is really not easy to say what the problem is here. AFAIK in headphone plug it is small, and through the use of headphones this past should disable Laptop speakers. All you can do is check if it happens after clean OS installation, maybe update the BIOS or install the latest driver sound.

  Sorry, but I don't see any other possibilities. If anything maybe you must contact the service in your country. I really can't imagine that this little mixer may be defective but service may only do a check.

  Bye and good luck!

• I can hear the sound from speakers and headphones...

  Hello..

  I use HP Pavilion dv5-1106AX laptop computer (Windows 7 OS). I can hear the sound from the speakers and the headphones when I connect the headphones into the headphone slot. I want to hear the sound from the headset when I connect the in the slit of the helmet.

  Any help on this would be appreciated.

  Thank you!

  My problem is solved. I found the solution here:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/music-playing-through-my-speakers-and-through-my-earphones/TD-p/3890528

• No sound from speakers and headphones, maybe not its output?

  At least two weeks now, I tried to find a solution to my windows xp computer after having no sound. I don't think it's my codecs, drivers or the speakers that I have recently reinstalled my drivers and codecs and it may not be my speakers because I use headphones anyway. I used the utility of windows troubleshooting and solving audio problems. I used 13 common sound problems and they and it still does not work.

  http://www.WikiHow.com/resolve-no-sound-on-Windows-computer
  And no, this isn't my volume was low before someone asks, it is full.
  P.S. This is my first question, so I don't know if I can answer. I f f you would like more information then please ask within reasonable limits, of course.

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/T61-no-sound-audio-device-on-high-definition-audio-bus-with/Ta-p/402339

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/Lenovo-T520-volume-on-headphones-are-very-low-soft/Ta-p/527537

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/no-sound-from-internal-speakers-only-from-headphones/Ta-p/752067

  above the 2 last links are also for the new t series, may or not may not report with your system

  QUOTE

  Solution

  The problem solved with a reset of the full power of the laptop.

  Stop and remove the battery, probably outside during the night.

  Connect the backup battery, turn on the laptop and and you should not get the noise as usual.

  END OF QUOTE

  here

  all above the knowledge base for the thinkpad lenevo

  ===============

  you might consider asking in the forum of lenevo support

  http://forums.Lenovo.com/

  ==================

  Troubleshooting audio in the thinkpads:

  http://support.Lenovo.com/en_US/diagnose-and-fix/diagnose-by-symptom/detail.page?LegacyDocID=MIGR-4YLR6P

  =============

  One of them should help :)

• Satellite M50-130: no sound from speakers but helmet works well

  Hello

  I have a laptop Toshiba Satellite with Harmon/Kardon speakers, using the Realtek AC97 Audio sound card. For some reason there is no sound coming out of laptop speakers, but when I connect earphones I get the sound perfectly fine, if clearly is not a volume control number. Device Manager indicates that the sound card works fine.

  I tried the system restore, and it does not work. Can someone help me please?

  Thank you! :)

  What s the name of the laptop?

  Looks a bit like a problem with the speakers for laptop
  The graphics card and the audio driver works very well if the sound is coming through the headphones.

  In this case, the technician should be contacted because everything looks like a hardware problem.

  Good luck

• No sound from speakers or headphones on Aspire SW5-012.

  I have an Aspire SW5-012. Suddenly today no sound will come from the headphones or the speakers. Both have already worked very well. My bluetooth speaker continues to operate correctly. I checked the Device Manager and updated the driver for the device Audio Intel the OHS (WDM) and restarted my computer. Device Manager indicates that the Realtek I2S Audio Codec driver is up-to-date. Device Manager shows that the speakers are working properly.  Any suggestions to solve this problem would be greatly appreciated.

  Yes, continue with the instructions including audio SST of the Acer download site. You can also see Windows update after you perform the above.

• Satellite L70 - no sound from speakers but headphones work well

  Hello

  I have a sound problem with my computer (satellite 70 L)
  I tried everything but nothing to do, no audio output, but plugging the headphones into the audio port reinstall his works well, so I uninstall Conexant, even for its dts but its still doesn't work does not,

  Thank you

  In my view, the symptoms of laptop are clear enough: he does not resemble his driver or system problem because the sound seems to use the headset.

  I think that the internal speakers are defective. It seems strange to me that the two speakers have begun to malfunction at the same time, but this problem may occur.

  But before you contact the authorized Toshiba maintainer to fix, I would recommend you to recover the laptop just to be sure that this problem is not related to the failure of the system/software to 100%.

• Just re-installed Windows 7, now no sound from speakers or headphones in Windows Player 12. Why?

  Helmet ok. Everything was going well on XP and Windows Media Player 11. What is wrong?

  You probably have not yet installed the audio drivers W7 remettera on your machine.

  Is: let W7 updated to do (not recommended)
  Or
  Access the mobile to your PC/computer manufacturer's Web site, locate the support page foryourunit and download then install the good and the most upto date W7 audio drivers. (Best solution).
  See you soon,.
  Jerry

• How to reset my Equium M50-192 to factory settings?

  Hi, I'm looking for some advice on my laptop.

  My laptop is a Toshiba Equium M50-192 and I would like to reset to the factory settings (on the box).

  I was advised by a friend that I need a recovery disk, but I don't seem to have one. Again, I have everything that came with the laptop when I bought it and have the different discs that came with it, but no recovery disk and have not been able to find the information I need the user manual.

  Is there a way I can reset my laptop without a disc?

  Any information or advice would be greatly appreciated.

  > Is there a way I can reset my laptop without a disc?
  It is not possible to reset to factory without reinstall drive settings. You have only one option: get Microsoft WXP installation disc and install the version of the OS.

  All the drivers, which you can download from the Toshiba support page.
  You can also try, it is to find if someone has the original disc of recovery for this machine and ask if you can get a copy.

• Equium M50-192 - upgrade to Windows 7

  I have an Equium M50 - 192, model No. PSM59E-003008AV, running on XP.
  My PC is Windows 7 and I have two machines on the same OS.

  Windows 7 Advisor on the Microsoft website shows that this M50 - 192 is suitable for an upgrade.
  I have already increased the memory to 2 GB.

  However, when I checked the Web from Toshiba site for pilots, there seems to be no driver Windows 7 for M50 - 192.

  Means that I can not upgrade to Windows 7?

  Hello

  Of course, you can install the Win 7 OS even if Win 7 drivers are not available for this unit.

  From my experience the Win 7 automatically looks for drivers and in most cases, the drivers are automatically installed in my case I didn t need to install the display in addition driver Win 7 found the drivers during the installation and process installation

• Equium M50-192 DVD & cd Format questions

  I have an EQUIUM M50 192 with program DVD + rewritable, but when dounlowding photos from the computer on a DVD in order for playback on other media, it won't work

  WHY?

  Hi Mich

  It's not easy to say why it doesn t work. I put t know what program brining you use and what DVD media you are using but it possible s that your use not taken in charge that the media or that you have not closed the session of engraving, etc.

  As you can see, there are many possibilities. I use the Nero burning rom software for burning CDs and DVDs. I also created a photo DVD to watch on the TV and it works perfectly.
  You should test this program. Maybe you're successfully.

• Equium M50-192 - startup problem

  I have a recently purchased EQUIUM M50-192 who developed a problem starting, a week after the purchase. To try to put the following happens
  Press the button power
  Turn on the light appears
  H/D light access appears
  CD-ROM flashes twice
  Then cut the power

  It passes through this sequence also if I open the lid, which suggests that the pc is in standby, IE opening the lid starts above sequence, as if you press the power button / stop.

  The same happens to a power supply (shows, seeing attatched and battery charge indicator) or only to batteries, also tried with battery but running.
  Have tried boot boot from CD via the F12 key and power at the same time but no luck with that, as mentioned above, I think the computer think it is somehow sleep and does not need to access the restore normal startup sequence. Can't find anything in the documentation re this implies a fault. Currently may not resume as collateral as abroad with out the paperwork he's come up with, for the next 6 weeks.

  Any ideas?

  Thanks in advance

  Hi, have you tried to remove the battery and then put back? Is also the adapter work correctly is the status light indicate a complete change?
  If you still not the laptop so that it starts then you don't have much choice but to the send it to Toshiba for investigation.

  Richard S.

• Equium M50-192 blocks - BSOD THREAD_STUCK_IN_DEVICE_DRIVER

  I have an Equium M50-192 and get a blue screen and an error message saying infinite loop.
  The microsoft error report brings up to http://wer.microsoft.com/responses/Response.aspx/11/en-gb/5.1.2600.2.00010300.3.0?SGD=c7ea1371-98d3-4da2-98f2-61636f184296#here

  Error message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) link - http://support.microsoft.com/?kbid=293078

  I'm pretty sure it means there is a problem with the ATI display driver but maybe wrong - ideas?

  Have tried to use the toshiba site to download the driver for it, I'm obviously a little distraught that while I can download and extract the files I don't know what to do next in fact update driver.

  Can anyone help?
  My laptop goes down all the time thanks to this and I already ran the recovery disks, but the problem still keeps recurring.
  Its adoption by trying to play a dvd and I have not yet tried to play since this first error, but it keeps recurring.

  Any help much appreciated

  See you soon

  Stuart

  Hello

  I completely agree with Akuma. If the same error occurs after installation of recovery it seems to be a graphics card problem.

  Before turning to an authorized service provider, you should try to update the BIOS. You can find it on the Toshiba site.

  If the new version of the BIOS doesn't help, you need help from the ASP. Maybe the motherboard should be replaced.

• Beep codes Equium M50-192

  Hello

  I have a laptop Equium M50-192, who decided to stop working.

  I get 4 short beeps when I turn it on. The power led lights and fans start but the screen does nothing.

  Where can I find beep codes mean?

  Thank you
  Dan

  Hello

  It's not easy to say what could be wrong. Beep codes usually appear because the computer MESSAGE fails.
  If the Unit falls down the POST (Power on self test) beep code indicates which is originally the laptop does not pass the POST.
  The problem is that the bee codes are not standard and each BIOS provides different meanings of postcodes!

  As far as I know your device was shipped with Phoenix BIOS if you can try to google a bit for the Phoenix BIOS post codes.

  However, for most hardware failure is responsible for these problems. You can try to check the functionality of memory modules.
  Remove the simple modules and check if some of the memory fails.