Equium M50: green screen fuzzy and all the white bits are pink color

Similar Questions

• support deleted files now, I have white screen and all the white icons. tried to do a system restore and it tells me I need restored HOW exe?

  SOMEHOW DELETED THE EXE FILE

  Have you looked in your Recycle Bin to see if the deleted files are still there? If they are still there, you can click right restore these and select. You can also try Recuva to try to recover deleted files. It's free.

  http://www.Piriform.com/Recuva

  I hope this helps.

• Hi, my navigation bar does not work and only the white pages are displayed

  Hi, my navigation bar does not work and that white pages are displayed - I watched the debate and made sure that each page is checked on "Export Page"; I checked that all pages are included with hyperlink. I deleted everything and started a new navigation bar; I have created a new site and started from scratch... nothing seems to work!

  It does not appear in the preview IE. I created 4 pages and when you perform a navigation bar, the title of the pages appears but when I saw and click one of the links, I get a full blank page with no navigation bar. What I am doing wrong? He worked for a time perfectly, but no more.

  Also, is it possible to manually check the links to see where I am redirected to?

  Thanks for sharing the file with me. Everything looks fine when I checked your file on my machine.

  Clear the browser cookies could solve the problem as default browser preview Muse use to render the pages.

  Kind regards

  Vivek

• Remove and check cartridge screen remains and all the buttons will Flash.

  Remove the cartridge and check led displays and flashes.  I installed new cartridges and the same message appears on my

  HP PSC 2175.  I ran the HP Diagnostics and it found no errors with the printer. I went through the proposed HP fixed but who still have the same problem.

  I had the same problem, I tried to reset with #6 or #3, cleaning.

  What worked for me (I bought a new printer but it send back now that mine works ;-))

  1 - while the printer is on, go to orders "Mfg".

  (on my printer I had to press on "*" and "#", others will have to press the arrows left and right, etc..)

  2. you get the message if poster 'Enter special key combination', then enter '123 '.

  3 - Press the right arrow until you find 'Special reports', click OK

  4 - Press the right arrow until you find "Print cartridges", click OK

  What was my surprise when at number 3, he began to print!

  And then everything is back to normal!

  Super cool!

  I hope it works for you!

• Taskbar disappeared and all the desktop icons are gone

  Ok... I think it's a virus... but I can't enter "search" to locate. When I connect my wallpaper rises on Windows and that's all. I start the Task Manager and type "explorer", but it says Explorer is not found. I did a virus scan and nothing came. Menu start has disappeared... How can I 'Search' a program when I don't have my Start menu or icons? And why 'explorer' is not found? Help!

  Hello

  It could be a virus, or it could be something interferes with the Explorer shell.

  If you press ctrl + shift + ESC, open the Task Manager? If so, on the applications tab click "new process" and type explorer.exe and click ok. This starts the desktop computer?

  If the Task Manager does not open, then you are probably infected (virus often block access to the Task Manager). Restart in safe mode by pressing F8 when the system starts at the start up, just after the initial POST, and before Windows starts to load. This should result in a boot menu where you can choose Safe mode. Run your scans antivirus from here.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• installed elements 14 on new pc using windows 10 and all the menu commands are grayed out.

  I can't change the preferences.

  I can't restore catalog etc etc.

  I then installed on the same pc 12 elements, and that's OK--that is of the menu commands everything works as expected

  This can happen if you are using the eLive currently.

  If you are in the Organizer, try clicking on the Media tab and if you are in the Photoshop elements Editor, click the Quick tab and see if it helps.

  Thank you

  Blandine

• Everything on the left side of the screen disappeared and all programs will not recover as malware has infected my computer

  Original title: I was struck with Mal-Ware. Everything on the left side of the screen disappeared and all programs. Does not restore. Everything is still there, but can't find it. How can I get that back?

  When I go to help and support, I've seen where it will take me to something in Office 2007 even if you ask the computer to find or search, he says that's not there.

  Hi windy-54,
   
  -What do you mean when you say "everything on the left side of the screen disappeared and all programs not recover"? Does this mean you "Start" menu is empty?
  -What is the exact error that you receive while you are trying to search for programs on the computer?
   
  Write us with more information pertaining to the matter to help us help you better. Meanwhile, scan your computer to clean the virus or malware that touched it.
   
  You can use the Microsoft security scanner to do the same.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• 'screen-top' fall all the time... any spring effect

  HI - whenever I'm back at the top of the screen, he falls all the time... There is no 'spring' no effect...... no "resistance".
  Can you help me?

  Hi Henrik,

  The hinges of friction on the lid of your laptop computer failed, and therefore the lid will not stay in open position. It is unlikely that you will be able to get the new hinges, otherwise a Toshiba authorized service agent, then I'd say that your best course of action is to contact your nearest ASP and ask for a quote to replace the hinges.

  Kind regards

• Vertical horizontal ratio has been changed accidentally. Now a vertical oblong (eg. a playing card) looks like the place and all the letters and pictures seem to be shortened.

  I suspect that I accidentally pressed a button or two on my Toshiba Satellite M55 and now all the images and the text have changed their vertical horizontal ratio. As a result, a vertical oblong (like a playing card), now looks like the place and all the letters and the images seems to be shortened or at least more wide than they should be. Is it possible to restore the original report? I tried access to control panel, hot key lists etc but can't find anything that actually return my screen to a normal appearance. Can anyone help please?

  Check Toshibha manul to press the function key to undo the changes.

  Good luck!!

• When I click on 'Add gadgets' in my sidebar, the screen that shows all the pop, but all the gadgets disappear immediately.

  Troubleshooting of Windows Sidebar

  When I click on 'Add gadgets' in my sidebar, the screen that shows all the pop, but all the gadgets disappear immediately, so I can't click or select one of them.  If this has never happened before, and what do I do?

  Hello

  If you use Start - type in search-> Sidebar box should still be crash - there may be a Gadget that causes
  the accident that you can help out if you can get it to run by turning off then restart in a process of elimination.

  You are using a version of Vista 64 bit that has gadget support the 32-bit and 64-bit files? If so, you will need to
  Run the lines of the procedure above in my 1st answer in both folders.

  This started recently past where you could have a Restore Point before this happened?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Hope this helps and happy holidays.

  Rob - bicycle - Mark Twain said it is good.

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I copy a sequence and all the duplicate items?

  I make a film of learning with key issues such as text captions.

  Legend sequences consist of:

  Text that are animated independently for two titles appear one after the other, then both remain on the screen.

  Matte colour background

  A logo

  There are therefore 4 clips in each caption.

  I created each one as a separate sequence using duplicate

  So far so good.

  When I then change the text to sequence 02 it changes in all other cases.

  What I want to do is to reproduce a sequence AND all the elements in it so that the new titles are created.

  This seems very basic - can it be done?

  Create a title based on the title currently titration and then replace the old with the new title:

  Create a title based on the current title

  • In the Titler, open or select the title that you want to base a new title.

  • In the title quick properties panel, click new title based on current title .

  • In the new dialog box title, enter a name for the new title, and click OK.

  • Change the title as you want.

  • Close the module titration or save project to save the title.

    from there:

    Create and edit titles in Premiere Pro

• Recently I downloaded pictures from an sd card. When the download is complete, all the photos were loaded randomly completely out of use. This is the first time, it didn't happen that way. Downloaded same map in iPhoto and all the pictures were in ord

  Recently I downloaded pictures from an sd card. When the download is complete, all the photos were loaded randomly completely out of use. This is the first time, it didn't happen that way. Downloaded same map in iPhoto and all the pictures were in order. Need help. I work on a job which requires immediate attention and in the disorder of HDR images are impossible to deal with.

  So to change the sort order in the import screen, there is a drop-down menu near the bottom that controls sort on the import screen