Erase part of installation iPhone 5

Similar Questions

• How to erase data from the iphone if I lost and iphone is offline

  How to erase data from the iphone if I lost and iphone is offline

  < post branched out by host >

  Hello

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  Hello

  Follow the instructions here:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• 2 questions here please: during the unlocking process: it says that I need to erase everything on my iphone. So, what of my contacts? How can I get that back?

  2 the questions here please:

  During the unlocking process: it says that I need to erase everything on my iPhone 5 s. So, what of my contacts? How can I get that back? because the backup to icloud it nor iTunes.

  In addition, what happens if I do not erase the content? That will prevent my form of phone is unlocked?

  Thank you very much

  RAJS

  Do not erase everything on your phone under the procedure of release.  If you have your phone set to backup Contacts on iCloud, they will be saved and then can be later reloaded on your phone after erasing it.  I just got two iPhone 5 and it worked well.  Also to do a full backup to your computer via iTunes and transfer everything what is not already saved if you are asked.  The only problem I encountered was that some applications does not and I had to manually reinstall the.

• update of security for IE8 windowsXP KB2691905 settled, said the part of installation is missing

  KB2691905 security update will not, settle said part of installation is missing. Using IE8, windows XP Service Pack 3. Keep getting update Update icon is ready to install

  Hello

  You are welcome.

  Install the update manually by clicking the below link.

  You are prompted to upgrade Microsoft Security Essentials in version 4:

  http://support.Microsoft.com/kb/2691905
   
   
  I hope this helps.

• Trying to erase part of a shadow dropped PS-CC2014 on a PC

  Is there a way to erase part of a shadow fell on an object?

  I need to erase the shadow on top of this leaf clover pedal and leave the rest alone.

  You must delete / remove the shadow indicated by the arrows.  See attached jpg image.

  AD < thank you > VANCE

  

  Layer > layer Style > create layer will put the shadow on its own layer where you can clear the area you want to remove.

• Erase parts of an image layer

  New blink: I need to erase parts of an image in a separate layer. When I use the clear option it does not erase part of the image, but when I drop my mouse once erasure is complete, does not erase it. Need me to where I was.
  
  I need to make part of an image in the end a transparent background, so the layers below will be visible. If you view the url below, you will see a large white space where the header is. I need the bottom of the circle looked at do ontop of each image that rotates backwards. I copied and pasted the bottom of the circle looked at in a new layer and attempted to delete parts of the image so it will be ontop of each image, but it does not erase.
  
  Click here for the example url
  
  Any help or advice would be greatly appreciated!

  Save the image had to be transparent on the other layers as png file in PS. case closed.

• I can't erase parts - selected lines - of a model in a jpg photo?

  I have a model on a photo .jpg. There are parts and lines that I want to erase. I can do this in Photoshop elements 11?

  Thank you

  Thanks to a bouquet. I have it.

• Best way to erase 'Music' of the iPhone and Resync with my newly deduplicated iTunes (I removed 30 GB of duplicates with "Tune Sweeper")

  Hi, I recently decided to clean up my years of iTunes duplicates.  "Tune Sweeper" ($24.99) reduced my 180GB to 150 GB.

  I don't want my iPhone (50 GB free) existing MUSIC to restore my iTunes on my PC.

  Can I just remove all the current MUSIC from iPhone and resynchronization,

  I go into the settings (storage) and deleted xxGB music on my iPhone but all my songs are still playable.

  I'm willing to pay for advice, if this forum is not able to help.

  Any suggestions?

  Connect the phone to iTunes on the computer that you sync with and click the music option. Uncheck the option "Sync music" and sync. This will delete all music from your device.

  Then go back to the music option and select what you don't want sync'd music on your device.

  See you soon,.

  GB

• How can I erase part of my race without changing the rest of it?

  I made an image of type circular Crest with a particularly well-defined race (so it looks like a stamp). I want only the exterior working STROKE and the inside be smooth (in the circle). Before I was just layering white on other circles, but now I need inside to be transparent. Is there a way I can convert my race into an object so I can easily erase the lumpy inside? If not, how can I get around this?

  The top image is what I have, the lower image is what I want. Only to have a transparent Center.

  Bokin,

  You can:

  (1) object > path > describe strokes,.

  (2) select the new compound path and the circle that gives the desired inner border and Pathfinder > less before or less back, according to the stacking order (less first plan if the circle is on top).

  Hi Kurt.

• Erase parts of a text

  Im trying to do a monogram and I want to erase half of a letter.

  any suggestions?

  Thanks in advance!

  Type > vectorize. You can edit vectors as you want.

• Installation of Oracle DB as part of any other product from Oracle

  Hello
  
  I would like to know if the product database Oracle 10 g / 11g is available for installation as part of any other product of Oracle Suite (e.g., SOA Suite, E-Business Suite) or the database has to be installed separately.

  SOA Suite, E-Business Suite are very different and so are hundreds of others by Oracle. Some set up the database as part of installation and others do not.

  concerning

• 6 s/iOS iPhone 9.3.5 Confusion of backup/restore/synchronize

  I recently needed to backup, delete and restore my 6s more to unlock it by the carrier.

  I downloaded iTunes on my laptop and made a captive backup via iTunes and also a backup over Wi - Fi to ensure against corruption.  According to receipt messages, eventually led both successfully.

  I erased and reset the iPhone and tried to restore from backup in iTunes on my PC.  In the end, I received a message stating that certain elements could not be restored from the backup and would require synchronization.

  Hoping to achieve a 'clean' restoration, I erased and reset the phone again and tried to restore it Wi - Fi, a process not fully understand because it does not seem to be a separate procedure.  It seems to restore part of the phone and the settings and the rest continue to download in the following hours.

  In the hope of "sync" my way out of the long time requirement by it attach to the PC and the synchronization of the purchased and other content including iTunes transferred to my PC during the backup process.  Despite my PC containing all of the content of the phone in iTunes library files, synchronization of the results in a message that the phone has been synched to another iTunes to another PC library which no longer exists.

  I can't be the first person to question why the iPhone and iTunes don't update automatically to recognize each other as current, as the whole purpose for phone synchronization was to restore the phone and the content on the same State after unlocking it by the carrier.  I don't want to remove any content that is saved in my computer, corrupt iTunes library or lose any multimedia content that has been saved and restored but now doesn't exist anywhere else.

  I'm particularly stupid?  Surely others have encountered similar frustrations and most intelligent people I have discovered how to work in the arcane procedures of Apple.  I would be grateful for any helpful guidance that will help me to get my phone back to where it was a few hours before before releasing the carrier.  They of course don't warn you of this potential drawback - or I would have never bothered.

  Thank you in advance to all those who provide useful assistance.

  No, you're not stupid at all. I don't know what happened in your case, but the normal procedure would be to backup on iTunes (forget iCloud, not as good IMO), get your phone unlocked by the carrier and check it, then restore the backup. There are some things that would be included not in the restoration, as photo albums previously synchronized from a computer. You'd have to re-sync those still separately but not much there.

  Try the above, once more and if this does not help, after return with specific details.

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.