No sound for the TV Media

Similar Questions

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• Sometimes I don't get and the vibrations or sounds for the text and incoming calls

  Hello

  I have phone 6

  Sometimes I'm not vibrations and sounds for the text and incoming calls

  I went to all the sound settings

  Thank you

  Is there a moon icon in the top right?

• How to disable the sound for the Minesweeper

  The old winmine had no noise. I liked it. How can I disable the sounds for the new Minesweeper?

  Thank you, Doug

  In Minesweeper, press F5 to bring up the options then uncheck play sounds , and then click OK.

• BlackBerry smartphones can not change 'Sounds for the selected profile' or create new ones

  I can't change any of the other sounds in my profiles or create new profiles.  I can switch between them and change notifications as expected from fort to vibrate to silence.  When I select 'Sounds for the selected profile' I get a transition of the screen as he opens the new screen, but then disappears.  I tried to create a new one, but the new profile button and menu option do nothing.  I upgraded to 6.0.0.246 in hope, he could solve the problem, but it didn't.  Can I change the ringtone and sounds for contacts only.  When I arrived at the torch, I could change and I even created a new.  Any ideas?

  delete nimbuzz, berrybuzz or any other instant messaging applications, and then restart the device

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• It "seems" is not an API for the art media at the CC of Adobe Photoshop for the touchscreen.

  PC: Microsoft SurfaceBook, Win-10, 64-bit, 16 GB of RAM

  All-in-one touchscreen Lenovo A740, Win-10, 64-bit, 16 GB of RAM

  Application two computers; Adobe Photoshop & CorelPAINT CC X 6

  SurfaceBook-in CC Adobe Photoshop works well with the pen & touch.

  Lenovo A740 - in CC Adobe Photoshop is inadmissible to capacitive pen (mouse works fine).

  Still... CorelPAINT X 6 works well with the mouse, touch and capacitive stylus.

  QUESTION - why the CC of Adobe Photoshop features lack INK API required for brush motor to work with capacitive touch screen on my Lenovo A740?

  It "seems" is not an API for the art media at the CC of Adobe Photoshop for the touchscreen.

  If... I'm wrong, please point me in the right direction.

  Move on to the Discussion of Photoshop

• Why there is no sound on the 'original media'?

  Try to understand this mystery: when inside the CAF, if I move the cursor on a clip, it plays properly.  But if I right click and "reveal in Finder" then try playing this clip (same), in Quick time, he plays without sound!... What's wrong?

  Not too practical, because I want to use these same clips in other programs (not only FCP...)

  Is it a setting I could have put somewhere? Just can not know...

  Thank you

  Rob

  Please give the complete media specifications as it appears in the QuickTime inspector window.

• Error 0xC00D2781 when obtaining security for the Overdrive Media Console software update

  When getting to a security update for the error code of Overdrive Media Console get 0xC00D2781.  I tried to update by going to tools in the Overdrive Media Console software and also by going to the link http://drmlicense.one.microsoft.com/indivsite.

  I found my answers in this forum. I had to change the DRM to DRM.old folder and reopen the media player and then it worked :) Good luck

• Error of update for the Windows Media Center guide

  I have Windows 7 64 bit.  I have been using WMC for local TV listings since I got my new PC in April (more than 9 months) without any problem.  WMC guide is always up to date... no problem.  However, the guide will not is no longer up-to-date.  During an update, everything works fine until it gets to the final stage of the treatment registration guide.  An extract from a newspaper of the observer of the typical events is listed below.

  I tried to redo my setup TV, but has the same problem.  I even tried a zip code different, but still had the same problem.  Using the event log, I discovered that this happened on 10/17/10.  Update been managed in the morning but closed later tonight here.

  19:12:07 - EpgListings extraction.

  19:12:07 - EpgListings of treatment.

  19:12:07 - EpgListing - 7.enc recovery.

  19:12:11 - 189828250_ListingData.mxf extraction.

  19:12:11 - 189828250_ListingData.mxf of treatment.

  19:12:16 - errors during the last update.

  19:12:16 - retries at 10/11/2010 17:30:48.

  Problem solved!

  Found this link which cleans the history for the installation of the TV.

  http://www.hack7mc.com/2009/09/clearing-Guide-data-and-tuner-Setup-from-Windows-7-Media-Center.html

  Deleted the files suggested and went through Setup from scratch and guide downloaded without problem!

  Hope this helps some other poor single frustrated with the same problem.

  Thanks for all the suggestions S.Sengupta.

  B

• BlackBerry Smartphones last one for the day - Media Player?

  Sorry about that but I have another question - I synced a few of my itunes playlists on the map and I can see and play the songs on playlists, but I can't understand for the life of me how to to move to the next song to unlock my phone, go back to the media player and then manually choose move to the next song. Isn't there a shortcut key or cant I double click on my headphones as I do with my iphone? Or am I the only one blackberry user suffering of TDA who likes to jump through their playlists sometimes?

  Here you go (from the online manual):

  Media shortcuts

  According to language hits input you are using, some shortcuts may not be available.

  Audio and video files

  • To stop an audio or video file, press the Mute button on the top of your BlackBerry® device.
  • To resume playback of an audio or video file, press the Mute button again.
  • To play the next song, press Volume to the top on the right side of your device.
  • To play the previous song, press on and press and hold the Volume down on the right side of your device.

  If you are using a headset, to activate audio boost to amplify the volume for songs, ring tones, and videos, press the Volume button upwards until you reach the highest volume setting, then press the Volume Up key four times quickly.

• Locate the path for the offline media

  I have a few offline items in my project, and media are distributed across multiple hard drives. Is anyway to find the path (directory) to locate offline media? I know willing first of data because if your player is connected media connects automatically.

  I just want to see the path, so I don't have to "trial and error" plug in every drive I have until the media is online. I often rearrange and delete things that makes media disconnect, so if I could see the way I know that this is the first research and could link to the new location.  In Final Cut you entitled simply clip on the clip, select "Media recconect" and he would then tell you where FCP is searching for the item in offline mode (ie: Macantosh HD/users/Benjie/Desktop/partnerships Footage Day 01). Having this path saves hours of searching information, does anyone have the solution?

  I use CS6 on Mountain Lion

  Thank you

  This is only possible with the new first Pro CC.  For earlier versions, you're stuck pretty well guess.

• Different Menu buttons for the different media queries?

  Hi, I searched everywhere for more information on how to make the menu buttons different on the different media and have not found an answer. I thought that I should ask here to see if one of you maybe able to help me as I have been helped here last time.

  I'm working out of Dreamweaver 5.5, and I recently implemented three queries various media; Phone, Tablet and desktop. Everything was going smoothly until I reached the menu buttons, the current menu buttons on my site are not fit for the use of the phone and could make it very difficult to navigate mobile. I went ahead and opened photoshop and created the different design bigger and easier to use the buttons. Change the layout of each quiery using CSS is no problem, but I am unable to do it with the menu buttons because they are outside the codification of the source.

  Basically what I ask, is it possible to change the graphics on the request of phone without changing them on two other requests? Like last time, this site has not yet been published and is still under construction so I won't be able to show a big part of it. I hope that my problem can be solved with just a mere mention or a method on how to do this in general for all sites, but I would be very happy for any help.

  You can use css display: none; in the css to hide and show support queries html areas you don't want display in different devices:

  Thus, in the application of media css for the smartphone would mask you 'navDesktop' and 'navTablet ':

  #navDesktop, {#navTablet}

  display: none;

  }

  I don't know if it will work, I think on my feet. I see no reason why it will not take.

• How can I disable the sound for the admin user when I am connected to my user?

  I am connected to my user on a laptop computer and the user (Administrator) has left a game or something and it was replay this weird audio track for the past 6 hours, at least. He is still playing right now and continues to play, no matter what I do on my user. I do not know the administrator password, and I tried all the solutions demanded that this password. Is there something I can do?

  AG

  One that asks for the admin password or cut your speakers not really.