Eraser tool reverse when before swapping and background colors

Similar Questions

• Windows 7: CS6: get a program error when flipping foreground and background colors

  Yesterday, I started to get an error when you try to set the default colors and then returning. I also have a program error when I try to click on the foreground color and assign it manually with the white.

  It's a Windows 7 Ultimate, with PS CS6.

  I closed the program twice and encountered the same problem, then rebooted and got the same errors.  As far as I can tell, it's the only tool or feature, other than the actions that this step in them.

  Looking for an easy solution first, of course.  Like maybe remove the file? Mac people seem to have to do it regularly.

  But, if all else fails, I will have to uninstall and reinstalling PS? That would also mean I have to reinstall all my filter packs, too?

  Thanks in advance,

  Mr. Jackson

  Yes, Shift-Ctrl-Alt.  You don't know why the hell I missed that you said that you're running Windows 7 above.  Sorry about that.

  -Christmas

• I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  Try to re - set preferences.

  Go to: Edit > preferences > general (menu Photoshop Elements on Mac)

  Click on the button Reset preferences on the next launch

• Foreground and background colors

  I have problems with masks. I have my foreground and background color defined in black and white (or I think I do), but when I use the foreground color black it does not block on the subject, but fills the area within the mask. When I use the brush to every brush stroke does not appear on the mask until I have let the mouse go. When I click on the foreground / background of the pop - up and black color picker box is within the current zone / new, upper right corner. I tried all the reset tools. I have 12 items. I am really a novice

  I do not have PSE12, but I have this suggestion...

  At the top of the menu bar, click window. This allows to display in my ESP 3 toolbars:

  

  The check mark indicates that the bar is visible.  By clicking on the name will turn off the check mark and hide this bar.  Perhaps your toolbar at the bottom is one of the reasons. If so, you can temporarily hide this toolbar. In PSE12 this option could be available somewhere else.

• Dreamweaver CS5.5 mac crashes when you use the background color palette

  Dreamweaver CS5.5 mac crashes when you use the background color palette

  Mac OS 10.11.3 El Capitan

  Hi bibledoc

  You can try to reset the Dreamweaver preferences.

  Following the file and the folder are removed from your system:

  / Users / your User Name/Library/Application Support/Adobe/Dreamweaver

  Rename the folder of Dreamweaver preferences, for example, Dreamweaver CS5.5 Old_Dreamweaver CS5.5 folder.

  / Users / your user name/Library/Preferences

  Rename the folder of Dreamweaver preferences, for example, Dreamweaver CS5.5 Old_Dreamweaver CS5.5 folder.

  Restore preferences in Dreamweaver CS4 and CS5, CS5.5

  Access the hidden library files Mac OS

  When Dreamweaver starts, it creates a new preferences file and the folder.

  If it helps doesnot, maybe you can try to create a new admin user account and check. If this is useful, you can try to uninstall and reinstall in the new user account.

  OS X Yosemite: set up users on your Mac.

  Kind regards

  Nikhil Gupta

• How can I change the size of text and background color?

  How can I change the size of text and background color? When I select the text box and change the height, nothing happens. If I drag the box is smaller, it just jumps back to where she was. If I try to change the color, (which is set to 'default' gray), no color, it still shows as white on preview. Because I can not change the size of text box, I need to at least make the clear background because it's something that overlap.

  Answered my own question kind of... I had to go into the 'code' and change the settings manually. Why even have the options in 'view designer' to change the size of text box or color if it doesn't?

• CNC - text and background color changes when you use the inc/dec

  Hello

  I develop an application that has a sign with a black background and green or red numbers. I have added digital controls and set the text color and text background color attributes accordinglingy. I put the control digital hot or validate command mode and display the arrows of inc/dec, because I want to incr/Decr numbers.

  The problem is that when I run the app and I hit arrows inc/dec, then the colors inside the scope of digital control become reversed: black background becomes white and cyan green number. I created an assosicated callback with digital control and tried to force the text color and the background, in the EVENT_VAL_CHANGED section, by using the SetCtrlAttrribute() function, but nothing helped. Also added ProcessDrawEvents did not help.

  When I mouse click again outside the digital command, then it returns to its original colours (green, black text background).

  Suggestions as to how can I fix?

  I want it keeps its original colors at all times, even when I am clicking on the arrows incr/Decr...

  Kind regards

  pgriep

  Hello Roberto,

  I thought it would be another way to fix it. Just hoped that I could fix it in setting or by disabling an attribute.

  Thanks for the effort!

  See you soon,.

  pgriep

• Just upgraded to 42.0 Firefox and background color setting doesn't work anymore - an empty window is always white.

  I just upgraded to Firefox 42.0 and, unlike previous versions, the setting of background color in 'Content' no longer works. In the settings page, the indicator 'Background colour' changes the color I choose (not white) in the choice of color theme, but each time I open an empty window background color is always white. Then, when I return to the Setup page to verify that the indicator still shows the color that I chose. And I have check the box 'Use the system color' or not there are tick, the result remains the same: the background color of an empty window is always white.

  It is a problem I've never met before. I would like to know why.

  Thanks for any help.

  You can make only one rule:

  @-moz-document url(about:blank), url(about:newtab){ html,body {background-color: #ccc !important } }

• Quick mask sometimes Exchange forefront and background - colors

  I use a lot quick mask, and I find some of the user interface issues in imagine.

  (1) sometimes when I switch to quick mask (Q key) mode, forefront colors and background reverse. Sometimes they have not. At the moment they are on a computer but that you don't have on the other hand. I've never been able to understand why this is, or what I can do to change. (FWIW, in my view, the reversal of the colours to more confusion, and I hate when they don't change).

  (2) when I go in the Quick Mask mode and then get out, my changes of selected layer. If I have a selected layer mask, then hit the Q key twice will be the selection of the layer for the pixels in the layer mask. I can't tell you how many times this has led to edit pixels rather than the mask. Is it possible to disable this option, so that the layer mask is selected? (If not, I'll post this as a feature request).

  (3) I tend to work full screen mode. Is there some landmark easily recognized if I am in master view fast or not other than the State of the button quick mask the hard-to-see "down"? I am continually getting confused because sometimes when I work quickly, it seems that the Q does not record, so I hit him twice, and then I spend a few seconds trying to figure on what mode I. I like the text in the window that gives me instant feedback of my status, but I like the extra pixels of mode full-screen. Y at - it another option that gives me full screen but easily seen your comments on my editing mode?

  I use Photoshop CS 6 for Macintosh. The title of my post reflects my pressing question most on the quick mask, but has decided to examine the possibility to publish other issues.

  TIA

  Alan

  There seems to be at least three sets of foreground/background colors:

  Channels of a color. -default black and white

  B. quick mask channel - default black and white

  The channels Alpha C. and mask - default white/black

  I was framed by the Alpha and the default mask is the opposite of other default values.

• images and background colors either not displayed at all or only sometimes

  For example, http://www.bpwcal.org looks fine in Explorer but in Firefox 3.6.10 the background color and/or image does not load. I did not have this problem in previous versions of Firefox.

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• I need to change my font color and background color are both black

  Hello
  I chose accidentally black for my font color and background.
  Since everything is black, I can't see the text in my window from the preferences (or modules) to restore.

  Any ideas on how I could do this?

  Thank you!
  NC_P

  Thank you for the update. If you notice anything important missing, as the parameters for an add-on, you can open this prefs.old file in a text editor and probably find it in there. We'll be there if you need help in this sense.

• Change of FG and background color of the individual elements in the array

  Is it possible to change the color of foreground and background of the individual elements of the array?

  According to the the link below it is not.  But that was 4 years ago and I wonder if it's possible with the new version of Labview.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=125484&query.ID=927250#M125484

  I could not find a way to do it using Labview 8.2.1.

  Thank you

  Adam

  No, you can't.  The tables have to share almost everything except the real value of the data.  As mentioned, you can use a second indicator to indicate your values of interest.  If you just want to change the background color, you can make a table of squares of color which lies behind the numbers array.  Make the background of the numbers (and the transparent table container.  You can do it 'look' as the BG of the numbers is changing.  The FG Color is not as easy.

  A (maybe better) alternative is to use a table or a listbox control to display your table.  They allow you to change the colors of the cells.  You will need to convert your table to an array of strings.  If your table is small, the hit on the treatment will be not significant.  But if you have REALLY large picture, you'll notice put worn times on day of the table/list box.

• FieldManager and background color - how to change the background color FiledManager

  I use the following code to navigate

  Change the background color of the domain manager. I see the print, but backgorund color FieldManager does not evolve!

  FMHorizSingleCont is a FieldManager. Thank you.

  final class UserInterfaceScreen extends MainScreen {
  
  private FMHorizSingleCont[10] fmSingContent; // fmsingContent is a field Manager
  
  public FMVerticalContents (){
      try
      {
        numElements = 0;
        currentRow =0; // Row where the focus is
        Background back = BackgroundFactory.createSolidBackground (Color.BLUE);
              ......................
  
  protected boolean navigationMovement(int dx, int dy, int status, int time) {
          if(dy<0){
        if(currentRow != 0)
        {
         currentRow--;
         fmSingContent[currentRow].setBackground(back);
         System.out.println("FMVerticalContents -- dy < 0 !!!");
         invalidate();
        }
  
      return true;
      }
      else if(dy>0){         
  
        if(currentRow < numElements)
        {
          System.out.println("FMVerticalContents -- dy > 0 !!!");
          fmSingContent[currentRow].setBackground(back);
          currentRow++;
          invalidate();
                              }
          return true;
         }else{          
  
         return true;
      }     
  
    }
  

  A HorizontalFieldManager does not paint anything, it's just a control class.
  You can crush his painting method to change this, for example with fillRect before calling super.

• Save the png alpha mask and background color

  place vote 0 down vote favorite

  My product uses 100 + white icons on a transparent background. How can I save icons with a color background, so I can see the icons in the folder view - but keep the cutting of the icon? Can I use an alpha matte, or a mask? Without a color background, the white icon on a white background looks empty and cannot display

  PNG does not support masks. However, the program that you use to display the png can allow you to change the background color.

  Another option is to create a duplicate png image that has a colored background. You can add the color name to make sure that you don't overwrite the original.

• Forms and background color

  Hello

  I'm new to illustrator and the difficulty by changing the background color of the working Chamber. I would like to see how my very simple forms look in the dark (black background).

  So, while I was able to change the color of the background, my forms, as well as their fill colors, simply disappeared. They are there, 'behind' the bottom and I can't / don't know how to bring them forward.

  How can I perform a simple task?

  John,

  What happens if you create a black rectangle of size sufficient/plan of work and place the bottom of the pile (the lower layer, you can do this in the layers palette, or use Ctrl / Cmd + X + B)?