ERPi initialize the Source system is not extract any chart.

Similar Questions

• Get an error window, the source folder does not contain any supported camera raw files

  Use the DNG successfully for some time now thanks to the Adobe forums after that I got my new 7 d. Always with the help of CS2 and is finally managed to convert the 7 d to the DNG format.

  Just be shot in raw of marriage because he needed a little more space than the 18 MP biggy.

  Now, DNG gives me an error message that the files source on my CF cards contain no support RAW files.  That is what it is? Any thoughts on why DNG cannot read RAW files smaller the 7 d?

  Big question here because it is a marriage to work on and I can not even begin to say how to slow DOWN, it will have to use EOS Digital Photo Professional from ADobe Bridge/ACR. I can just go die.

  A little help if someone knows why worth a glance.

  Are you sure you are using the latest (version 5.6) Adobe DNG Converter?

  You can download it here:

  Windows:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4620

  Mac:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4619

  As far as I know, the DNG Converter supports 7 d mRAW and sRAW files to DNG conversion. If you are sure you use 5.6 and your raw files do not work, can you post them somewhere so that I can download and St them?

  Another thing, you can try it for some raw files copy manually the CF card into a folder on your desktop, and then ask the DNG Converter to convert these local copies to the DNG format. If conversion mRAWs on your office's work, but their conversion on your card does not work, then it is possible that you have selected just the right folder on your card in the DNG Converter, or there may be another problem, just read the files on your card.

  Thank you

  David Franzen

  Quality engineer

  Adobe Systems, Inc..

• Error initializing the source system

  Hi Experts,

  During the initialization of the source system was wrong out when I use Oracle E-business suit as a source.

  the user we use in oracle has the same access, such as mentioned in the Administrator's guide.

  Initialization of the source was failed with the error below:

  ODI-1227: basic system EBS updated Source (procedure) task language fails on the source of ORACLE EBS_DATA_SERVER connection.
  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
  at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
  at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
  at oracle.odi.query.JDBCTemplate.executeQuery(JDBCTemplate.java:189)
  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:94)
  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
  at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1930)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1073)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 1.run(DefaultAgentTaskExecutor.java:49)
  at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
  at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor.executeAgentTask(DefaultAgentTaskExecutor.java:41)
  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.doExecuteAgentTask(TaskExecutorAgentRequestProcessor.java:92)
  at oracle.odi.runtime.agent.processor.TaskExecutorAgentRequestProcessor.process(TaskExecutorAgentRequestProcessor.java:83)
  at oracle.odi.runtime.agent.support.DefaultRuntimeAgent.execute(DefaultRuntimeAgent.java:79)
  at oracle.odi.runtime.agent.invocation.support.InternalLocalRuntimeAgentInvoker.invoke(InternalLocalRuntimeAgentInvoker.java:49)
  at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:173)
  at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:140)
  at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:271)
  at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:162)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3437)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1509)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:44)
  at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1930)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1073)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  at java.lang.Thread.run(Thread.java:662)

  Thank you

  Ravi.

  The approach you take here is not only give your users access to the FND_LANGUAGES table, but also create a SYNONYM for this table in the schema of the user that has been configured to connect to the EBS GL diagram in ODI. It is the way in which this is done also in the schema for the user to APPS. You can check yourself by running this as the user APPS to show that FND_LANGUAGES:

  SELECT * FROM USER_SYNONYMS WHERE SYNONYM_NAME = 'FND_LANGUAGES ';

  Once you create a SYNONYM in the schema of the table are accessible without prefixing scheme name in front of the user's table or you should then be able to run SELECT * FROM FND_LANGUAGES; which is the format that uses up until this FDMEE is done, you must use SELECT * FROM APPLSYS. FND_LANGUAGES; even if you've got access to this table.

  HTH

• Impossible to install physx for Mass Effect 3. Error failed to initialize the physical system.

  Original title: fatal error install physx even after using the shortcut and adding / quiet to the target

  I tried to install physx to play Mass Effect 3. However a pop-up message and the installation has ended

  "Unable to initialize the physics system."
  "Please make sure you have a version installed PhysX system software update."
  After reading some posts online, I created a shortcut as
  C:\Users\USER\Desktop\PhysX-9.12.0613-SystemSoftware.msi/quiet
  Yet, nothing happened, the program file was not a folder named Nvidia, the games always says it cannot start because it is impossible to activate his physical flow...

  Hi Javier Wong,

  1 did you do changes on the computer before the show?

  Method 1:

  Put the computer to boot and then try to install the software.

  Step 1: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Step 2: Uninstall the earlier version of the software

   

  See the following site:

  Uninstall or change a program

  http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program.

   

  Step 3: Install the latest version of the software

  See the following site:

  NVIDIA PhysX System Software

  http://www.nvidia.com/object/physx-9.12.0613-driver.html.

   

  Method 2: Download and install the latest graphics Driver

  Install the latest graphics driver.

  You can consult the site mentioned below:

  NVIDIA driver downloads

  http://www.nvidia.com/Download/Scan.aspx?lang=en-us.

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• When trying to update, I received this message: Firefox 3.6.3 (2).dmg.part could not be saved, because the source file could not be read.

  When trying to download an update, I got all first: "there was any problems searching, download or installation of this update. "Firefox could not be updated because: no data has been received (please try again)" he also gave a link to download manually. When I tried the site in Firefox, I got: 3.6.3 (2).dmg.part /Users/(deleted for privacy)/Desktop/Firefox could not be saved, because the source file could not be read.

  Try again later or contact the server administrator. I tried this 3 times.

  This has happened

  Don't know how many times

  Is around 11:00 central time Mon, 17 May 2010

  This means that the file cannot read because he was interrupted while downloading. Try to download again

• I was wondering in the era of 3d everything that the operating system has not changed to 3d?

  I was wondering in the era of 3d everything that the operating system has not changed to 3d. like where the BONE is part of work like as if you where he is plunged into a game but the game was the operating system. As windows responding simcity.  so when you interact with something he grows or changes the subject. I'm tired of seeing a 2d world when I know that a 3d world is here. I want to say is that imagine an OS that was alive. like all those science fiction movies. I'm new to programming, but it's just one of my many ideas that I think could change the computer OS never imagine sitting on your couch with 3d glasses and feel like you where in a virtual world.

  One simple reason: convenience.

  The current problem with our 3D technology is that it would be broken by you are going to use the touch interface. Because, after all, it's just an illusion. Now let's talk about resources: do you really want your OS using towards the top of your ram, CPU and GPU to the point where you could not yet to start a game?

  Now think about 5 years computers upgraded... they would be even able to run this OS?

  What happens if there is more than one user per computer? What about people who get migraines of 3D? (shutter put on my glasses and my ability to perform simple tasks similarly is gone in 5 min with migraine resulting)

  Maybe this will be handy one day, we just aren't there yet. Do not give up the hope, however: at the moment where you get one such product coded, the tech world will already be a different place.

• the source code is not available

  the JDE show me this message
  the source code is not available

  in the race... I can do pleaseeeeeee?

  Thank you for all

  I got it when I reset for Simulator was told there is an exception. I found and solved

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• Why after 6 months not my new desktop computer says that the operating system is not authentic, alan

  Why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason it is now not an authentic version of windows.can you help me with this little problem as a failure more has turned up, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  alanandmovita wrote: why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason any , now is not a genuine version of windows.can you help me with this little problem such as a power outage more has turned upward, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  Hello alanandmovita, you could try to return to a Windows Restore Point before your latest Microsoft updates where you mentioned that he installed Essentials without your permission.

  Go to the start ORB, all programs, accessories, System Tools, System Restore, and look for a date before the updates were installed.

  There is a reason, that I never use automatic updates. Windows updates all that Microsoft feels that they want that you want or need or not.

  Just some thoughts.

• My subscription has ceased, even I made my last payment on 22.03.2016. My Plan marked as expired. The system is not providing any other solution but only update my payment information, I did. Nothing seems to happen. Online support is disabled. I have

  My subscription has ceased, even I made my last payment on 22.03.2016. My Plan marked as expired. The system is not providing any other solution but only update my payment information, I did. Nothing seems to happen. Online support is disabled. I have no choice but to ask here for help! I need to work, I need to work now!))

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• \Lightroom_4_LS11_win_4_4.exe.part could not be saved because the source file could not be read.

  Update 4.1 to 4.4 Lightroom I get this message - LS11_win_4_4.exe.part could not be saved, because the source file could not be read.

  Hello

  Please uninstall Lightroom 4.1 and then download the latest version to install. It should work.

  Kind regards

  Abhijit

• recovery system option - not found any operating system, load drivers

  Hi, Im new here ^^ I am here to ask a question, he made me feel confused. I bought a laptop last year, which is (Acer Aspire 4930 G). Today morning when I turn on my laptop, it showed me all of a sudden

  PXE - 61 - test Media Failed
  No bootable devices - insert the boot CD and press a key

  I made impossible the network startup and test media is fixed. After that, I started using VISTA HOME PREMIUM recover CD and tried to fix my computer, but it seems to do the job.  These are the problems that I met

  1. once I click on "Repair my computer", it pop up a "system recovery option" forms but the operating system has not appeared and he asked me to load the drivers (not sure it takes load 1)

  2. If I continue without the operating system and I clicked on the "Startup Repair", it shows me that "cannot automatically repair withouth', is m felt confused.

  3. If I click on the "System Restore", it doesn't seem to work too.

  May I ask... How can I recover / find my operating system? and how can I solved the problem I've met? Is to make fuzzy m

  Recovey process Acer is normally a complete reinstall back to the factory settings: how you bought.

  http://support.Acer.com/

  For all questions/issues with Acer Recovery Media, contact Acer at the link above.

  It's Recovery process Acer, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del