Error 0x8000ffff trying code désenregistrez the codec file iac25_32.ax starting from the command prompt (cmd.exe)

Similar Questions

• How to install a local help for the tools of cmd.exe and command line on Windows 7?

  Hello

  for many applications, the command line (cmd.exe) is a good choice to get results with minimum effort. The shell has continuously been improved over the years, at least until Windows XP.

  All the command line tools have a short help screen (using the /? option). When you need more information, you use Windows system for example from the Explorer Help. It is very good.

  Now, Windows XP Help content was installed on site, and the operating system. In Windows 7, my computer wants to go to the Microsoft web site on the internet and there is no local help available. The operating system seems to be incomplete. This makes the help system unusable on a computer without internet access or when the server is not accessible.

  So my question is: is it possible to install a local copy of help for the tools of cmd.exe and command line under Windows 7 or do we have to go back to Windows XP?

  Thank you

  Martin

  Download it directly from Microsoft - Windows Command Reference

• Codes and 80041002 repeated error 8004102f trying to set up the Live Family Safety.

  Codes and 80041002 repeated error 8004102f trying to set up the Live Family Safety. I uninstalled then reinstalled emissions live as suggested here in the forum, but nothing helped. I always get error codes. I'm trying to set up on my Vista operating system with os XP of my daughter.

  Please go to windows live solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=4

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error while executing a script from the command prompt

  Hello, I edited the settings file and I am trying to execute an interface that links the two tables in the HR schema and load into a table in the different schema. I am able to run it in the designer, but I get an error message when I try to run through the command prompt.
  Here is the error message when I try to run it
  09/09/2009-11:58:42 AM (hand): session for scenario creation: DEMO_INTERFACE - 001
  
  09/09/2009-11:58:42 AM (hand): Session: 88010 is running
  com.sunopsis.core.SnpsInexistantObjectException: there is no link for this
  pair logical schema/context: HR / GLOBAL
  at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContex
  t (SnpConnect.Java)
  at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect (SnpConnect.java)
  at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst (SnpSession.java)
  at com.sunopsis.dwg.dbobj.SnpSession.getConLst (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand (DwgCommandScenar
  IO. Java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.e.y (e.java)
  at com.sunopsis.dwg.DwgJv.treatCmd (DwgJv.java)
  at com.sunopsis.dwg.DwgJv.main (DwgJv.java)
  at oracle.odi.Agent.main (Agent.java)
  09/09/2009-11:58:43 AM (hand): Session: 88010 completed with return code:-1
  com.sunopsis.core.SnpsInexistantObjectException: there is no link for this
  pair logical schema/context: HR / GLOBAL
  at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContexur
  t (SnpConnect.Java)
  at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect (SnpConnect.java)
  at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst (SnpSession.java)
  at com.sunopsis.dwg.dbobj.SnpSession.getConLst (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand (DwgCommandScenar
  IO. Java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.e.y (e.java)
  at com.sunopsis.dwg.DwgJv.treatCmd (DwgJv.java)
  at com.sunopsis.dwg.DwgJv.main (DwgJv.java)
  at oracle.odi.Agent.main (Agent.java)
  DwgJv.main: output. Return code:-1
  
  Thank you for your help.
  Murielle

  Are you sure about the configuration of odiparams.bat?

• Generation of the command prompt gives HH.exe - no disk error?

  Windows 7 64 bit

  HR 9.02.271

  Ok. I'm trying the generation of the command prompt for HtmlHelp output for the first time.

  I followed the HR documentation to the best of my ability and came up with the following text:

  RhCl "d:\hg\pcdmisqa\pcdlrn\help\vision\PC-DMIS Vision.xpj"-l "Vision common CHM' o D:\DocProjects\Outputs\common_chm\

  The first parameter is launching the project, the second defines the layout of the generation and the third exit.

  It generates a help file. But I have these questions / issues:

  (1) is there a generated log file to determine if there is problems in compiling? If Yes, where?

  (2) is there a way to specify the name of the chm output? He seems to be basing the name on the xpj file name instead of to the name defined in the schema. I want the name of the file to be 'pcdmisvision.chm '. It gives me 'PC - DMIS Vision.chm'. It is not a big problem because I can use other commands to prompt to rename. But still... would be nice.

  (3) when I run generated help I get this strange hh.exe - No. Disk error:

  

  By clicking on the buttons of the watch to the message above again. But after clicking three times, it finally launches the help:

  

  But he launched with this default topic... maybe because it's the first alphabetically? It certainly won't be the default theme specified in the layout. In addition, the tabs Index and content are missing. I have the hhc file and perfect defined in the project and specified in the provision. Use the Favorites and search tabs. The glossary tab contains all the entries (though it should).

  If I generate the same exact provision within HR everything is built as planned and desired: TOC, start page, no hh.exe errors...

  Does anyone else know similar problems? This feature seems very buggy for me.

  How can I fix these problems?

  Thanks in advance!

  I wanted to note that I corrected this problem a couple of weeks. It turns out my xpj file had problems. I had several references merged CHMS, but which had ceased to exist in the element.

  Once I deleted these references using a text editor and saved the fixed xpj and recompiled, I got is more the above error.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.

• Validate if something is selected in the command prompt

  Hello-

  How can I check if something is selected in the command prompt? In the report, I have to do < function1 > when there is only option selected in the prompt else < function2 >. I tried with variable presentation. So, my syntax in the column:

  -CASE when @{Var}['@']{'abc'} = 'abc', then 'Nothing is selected in the prompt' else 'this value in the prompt' end

  It works fine when only a single value is selected in the command prompt. When there are multiple values selected, it gives an error.

  Is there another trick to achieve this?

  Thank you!

  Instead of checking for is null or "variable presentation, it would be easy.

  just in case where to check it cool - bi.com you could get an idea of how validate the variable presentation.

  If brand aid

• start the script from the command prompt

  Hi all
  I'm trying to run a script from the command prompt, I get the following error message:
  A JDK is required to run Web Services with OracleDI. You are currently using
  a JRE.
  OracleDI: From scenario INT_ACCOUNT_LOAD_ONE 001 Global context...
  java.sql.SQLException: no driver appropriate
  at java.sql.DriverManager.getDriver (unknown Source)
  at com.sunopsis.sql.SnpsConnection.u (SnpsConnection.java)
  at com.sunopsis.sql.SnpsConnection.c (SnpsConnection.java)
  at com.sunopsis.sql.i.run (i.java)
  
  
  I gave the information to the repository in the file odiparameters.bat, also I put the ODI_HOME path separately in the system of environmental variables. It is not a form of work.
  
  Concerning
  KK

  This error message indicates that the driver is correct, but your URL for your storage space is not. (if she could not find the driver, then he would have given the exception to com.sunopsis.sql.c)

• How to save passwords after you said 'no' to the command prompt

  How save passwords after you said 'never' at the command prompt.

  I tried again and again and again, and none of the solutions suggested on the internet works. And there is also something too complicated for me.

  Hi, jscher2000:

  Yes it's MARKET! Thank you very much for your help!

  I'm not all pages to remember my password I just want some specific pages to remember passwords. for example. for now I only need craigslist login page to remember my pw, not other login pages.

  If this is the case, then it is a perfect solution for me.

• Satellite L - can I add new accounts via the command prompt?

  Is it possible that I can add new accounts to the machine via the command prompt on the screen of "recovery"?

  (When you start in recovery mode and select command prompt)

  I tried the normal commands "net user username / add ', but the accounts are not added to the machine.

  Y at - it another command which can be used?
  Thank you.

  Hello

  I don't know if it will work using the in my opinion Mr. recovery console, it is not possible.
  As far as I know that you can add the user and the password using the CMD, but this might work only when the Windows operating system has been loaded.

  In this case, you can use this command to add the user account: + net user username / add +.
  If you want to add a password for the user account, then you must use this way: + net user username password / Add +.

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• How to get connected through the recovery environment for the command prompt administrator privileges?

  Original title: how to make the command prompt as Administrator via dvd, USB system recovery / then to repair, recovery environment invites of commands in menu on win vista, win 7, win 8?

  Hello world?, please can someone tell me how do the command prompt as Administrator via/via menu environment of recovery with the option prompt orders..., that way I can activate the hidden administrator because I forgot my password of the computer... rather than editing the registry with the cmd... It says on the top of the command prompt x administrator cmd prompt and on the guest herself said x source then the guest... I thought that I can activate the admin hidden here coz he said administrator on the top of the program but it won't let me activate the admin hidden using this command: "net user administrator / Active. ": Yes" he says: successfully completed, but after I rebooted the computer the hidden admin did not appear on the menu of connection of users, I can activate the admin hidden with this command. "net user administrator / Active: Yes" through connection to a normal startup, then proceed to the command prompt with administrator previledge, but not through, dvd environment then recovery recovery menu system, the command line option... is one way or shortcut to the command prompt with admin previledge as the high cmd prompt the normal start standard? Please please help... I want to do coz I forgot my password for admin user computer, there is no other user account on the computer... "Please help, guru of the computer/engineers/programmers out there," and I thank you so much all the response I get, and God bless the guy more... «what I wanted to say that I can make the order: "net user administrator / Active: Yes" in the connection of nomal startup is coz I tried on another computer with windows vista 64 bit...» "but I forgot my computer password... I know how to edit the registry, although to allow the hidden via the recovery environment option administrator cmd menu but I want the shortcut... thank you once again,

  Hi Robert,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/threads

  Hope this information helps.