Generation of the command prompt gives HH.exe - no disk error?

Similar Questions

• My computer guard goes to the command prompt and then closing when I try to open .exe files

  When I try to open an .exe file continues to go to the command prompt the closure as soon as it appears, as his tent to open a java file. After that, it showed all my icons symbol of java and wont open. The only thing that EOP are java files. I need to know if I should consider, or if it can be fixed manually.

  Hi MinecraftDude,

  Did you recent hardware or changes to the software of the system?

  You can consult the following article and the chek if it helps.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  Hope this information is useful.

• Can't see my Windows 7 user account (users\John) in Windows Explorer. I search/modify it from the control panel. I can see it from the command prompt. What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  It is a file system / hidden?

  May not, your settings in Windows Explorer is configured to be able to see (display hidden and system files/directories).

• How can I configure the standard user profile in the impossibility to use the command prompt on windows7

  My teen age son knows how to get into the command prompt and use the computer as an administrator temporarily... How can I stop this?  It has a standard user account.

  On the flavors below, you must edit the registry directly by creating the value of HKCU\Software\Policies\Microsoft\Windows\System! DisableCMD.

  
   

  How to change the registry? I need more specific measures.

   

  Thank you

  Kathy

  This is not a trivial process for non trained. Also note that open a command prompt does NOT give your son of additional privileges unless he knows the password for an administrator account.
  Please note that if you skip any step then you may have a machine that won't start longer.
  1. Burn a CD to repair Windows via Control Panel / backup and restore.
  2. Test this boot the machine with her CD in the repair of Windows.
  3. Label this CD as "Repair Windows CD", then store it in a safe place.
  4. Start normally. Logging in as an administrator account.
  5. Create a Restore Point.
  6. Log in under your son's account.
  7. Click on the Globe to start, and then type regedit.exe and press ENTER. Enter the credentials of the administrator in case of dispute.
  8. HKey_Current_User\Software\Policies\Microsoft\Windows-access
  9. If there is no windows system key, create it:
     Click Edit / new / key, type system, and then press ENTER.
  10. Click on the key to the system.
  11. Click Edit / new / DWord, and then type the letters DisableCMD and press Enter.
  12. Double-click the DisableCMD value, and then type 1 in the data field and press ENTER.
  13. Try to open a command prompt. You should get a message of "deny".

• Need help to fix a computer using the command prompt

  So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

  I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

  3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
  At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

  However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
  Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

  I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

  I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
  A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

  However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

  The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
  This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
  So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

  Is there something I can do? Someone has an idea of what could have happened?
  My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

  The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

  Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

  Hello

  Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

  @@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall your operating system:

  Here are the instructions Acer for recovery to factory settings, new condition.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  See you soon.

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• Files corrupt in the command prompt

  original title: FILES CORRUPTED IN THE COMMAND PROMPT

  SIR IN THE COMMAND PROMPT, WHEN I PUT THE COMMAND SFC/SCANNOW AFTER 100%. I FOUND THE ERROR THAT THE FILE IS CORRUPTED AND COULD NOT FIX IT PLZ HELP

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Delete the registry via the command prompt keys

  I uninstalled a program on my computer, and I want to remove all the remaining files, registry keys and values of that particular program to the registry via the command prompt. Y at - it a command line that can scan and remove all the remaining files, registry keys and values of this particular program of the whole registry via the command prompt in only once.

  Please help me.

  If the uninstall program is correctly written, then it will do it all. If this isn't the case, you will have to do it manually. Although it is possible to write a script that will scan the registry for some channels, it is not a trivial task. Running one such script would be quite risky because it could easily delete the wrong registry key.

  Also note that the unused files or registry keys not used do not slow down a machine, contrary to popular belief. Purge of these undesirable things might give you a welcome warm feeling inside, but he has no effect on the performance of the PC.

• I am running virtual xp on a Windows 7 system, but I can't get cursor flashing at the command prompt... help?

  I am running virtual XP on a Windows 7 system, but I can't get cursor flashing at the command prompt... help?    I studied the orders autoexe.bat, command.exe and cmd.exe, son and so on.  However, nothing seems to work.

  Hi Bernard,.

  Given that the question relates to the virtual XP, which is outside the boundary of support. I would ask to view the query in the TechNet forums for assistance.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Please come back if you have problems with Windows.

  Thank you.

• How to rename a directory by using the command prompt

  How can I rename a directory using the command prompt?  Say I want to change c:\Users\User c:\users\user utilisateur\Mes Documents documents.  How can I do this?

  I looked in Google.  Here's what I found.

  G:\data>mkdir dir1
  G:\data>dir /b
  dir1
  G:\data>rename dir1 dir2
  G:\data>dir /b
  dir2
  G:\data>What would I write for the data? And what would I write for b?
  

  C:\docs>ren c:\docs\1.txt 2.txt
  C:\docs>dir /b
  2.txtPlease give me an example.Rod Computer
  

  OK, I fixed it.  I did go in safe mode, go to documents, right-click on the file, select Properties, security, advanced, owner and change the owner.  And that's all.

  They don't call me computer Rod for nothing!

  Thank you

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Why I can't change the default program from the command prompt?

  Accidentally, I changed the default program to open the .py (Python script) files at the command prompt, now I can't change it back even in the Control Panel, the check box is gray. Also I tried the registry editor, I do not have the NoFileAssociate file.
  If someone could help that would be great!

  Hello

  This problem occurs when Windows thinks that the application already exists in the list. Change the name of the application may fix this problem. Please try the following if you do not want to rename python.exe

  
  Method [1]: Use the registry to change the application Associations
  ATTENTION: It is recommended that you create a restore point before you proceed
  • On the start menu, insert the following text and press ENTER: regedit.exe
  • Delete the following key
    Python.exe HKEY_CLASSES_ROOT\Applications\

  Thank you
  Have a nice day :)

• Validate if something is selected in the command prompt

  Hello-

  How can I check if something is selected in the command prompt? In the report, I have to do < function1 > when there is only option selected in the prompt else < function2 >. I tried with variable presentation. So, my syntax in the column:

  -CASE when @{Var}['@']{'abc'} = 'abc', then 'Nothing is selected in the prompt' else 'this value in the prompt' end

  It works fine when only a single value is selected in the command prompt. When there are multiple values selected, it gives an error.

  Is there another trick to achieve this?

  Thank you!

  Instead of checking for is null or "variable presentation, it would be easy.

  just in case where to check it cool - bi.com you could get an idea of how validate the variable presentation.

  If brand aid

• Date of Max in the default selection of the command prompt

  Hello
  
  in the command prompt, I have dates, I need a maximum date in default selction of the guest of
  How to give max ("table". "Colum") "

  You write the query as
  SELECT MAX (Time.Date) saw_0 "SA".
  at the prompt to-> see the-> results of SQL, use this query

  If help pls mark as correct/good

  Published by: on November 22, 2012 vieren 06:33