error 0x800700c1 is not a valid Win32 application

Similar Questions

• Setup error: (E:\ is not a valid Win32 application)

  I am trying to install Windows 7 on my Windows XP computer.  I inserted the disc of windows 7 in the DVD player and get the error E:\ is not a valid Win32 application.  How can I solve this problem?

  You are running 32 bit XP and try to install Windows 7 64-bit? If so, you must restart and boot from the DVD.

  Installation custom own steps

  Time to use:
  Or the transition from XP to 7, not supported in place upgrade paths (ex: Vista Home Pro 7)
  Move Windows to a 64-bit system from a 32-bit system or change languages
  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation do you want?" click "Custom (advanced)." Note: 32 to 64-bit requires you to restart and boot from the DVD.
    
  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• In the face of error "%1 is not a valid Win32 application. (0x800700C1)"in windows server 2012 R2 while running the windows schedule

  Dear team,

  In the planning of windows since windows machine run R2 server 2012 am facing the following error.

  "%1 is not a valid Win32 application. (0x800700C1).

  We have set up the automatic backup for our Desigo insightV5.1SP2 application calendar.

  Thanks for supporting.

  Regarding

  Athi

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Just DL ITunes and can not be opened. Error message says "Not a valid Win32 Application"

  Please help me. It took HOURS to dl iTunes and now I can not open. Am error message appears and says "C:\Users\Stephanie\Downloads\iTuneSetup.exe".

  is not a valid Win32 application ".

  Thanks :)

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• After downloading the program, I can't install them. Error: 'path is not a valid Win32 application ".

  After downloading the programs I can't install them

  Hello

  1. which site Web you downloaded the program from?
  2. you use a download manager to download the program?
  3. what web browser do you use?
  4. don't you make changes on the computer before the show?
  5. were you able to install other programs on the computer?
  6. what program are you trying to install?

  
  Method 1:
  You can try the steps in the article of the supplied knowledge base and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
  
  Method 2:
  You can also perform a clean boot, and then try to install the program and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can run Microsoft Safety Scanner in Mode safe mode with network and check.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode 

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

• During the installation of Analog Devices Multisim: not a valid win32 application

  Hello

  I am trying to install the Analog Devices of Multisim version, but when I do it instantly responds with an error message "is not a valid win32 application".  Any ideas on how to fix?

  See you soon,.

  Phil

  I think that you have a corrupted download. If you have downloaded the 10.0.1 version (the default file name is NI_Multisim_Analog_Devices_Edition_10_0_1.exe), the MD5 sum should be 3c49b3ef99ec86ef6c013268405bcaa3

• D:\ is not a valid win32 application. CD/DVD drive reads music CDs, but no installation CD

  I recently reinstalled my Thinkpad T42.  After installing XP and install all updates, I tried to install Microsoft Office Pro 2003 by CD-ROM.  My CD/DVD is not able to read the CD and gives the following error D:\ is not a valid win32 application.  The drive can read music CDs and works correctly.  The Office 2003 installation cd is clean and works on other computers.

  Any suggestions?

  Thank you

  Yes, you are right logically.

  Now I see two sceenarios for the solution to analyze your clues:

  Number 1: Technically on the media (e.g - CD/DVD) in what place (at level nm) is the setup.exe, which might be a little corrupted or overburn.

  To read the corrupted or overburn data recording Media(e.g-CD/DVD), lens optical drive must be precisely align / optimized. But your workout goal isn't in this top performance more. So that it can read only where another player can read that.

  Actually lose everything in a music or movie playback by laser beam data a bit do not count a lot (maybe a drop of a sound level of a few nanoseconds which is missed by our ear) but to read a file .exe must be exact to change a little vital file execution make the whole file unreadable garbage before System. But such laser weakened to run well on music & movies.

  To resolve the installation of MS Office thet you just copy all the content of the disc to your HARD drive & then try to install. If the problem persists copy the .exe to install a USB key, the other car that can be read. Then replace the HARD disk by the corrupt.

  Number 2: (Associated virus infection) Your system might be infected severely by code viral insertion of viruses. While any execution of .exe file is impossible on the system, CD/DVD and HARD disk USB storage etc & they won't take their appropriate icons. Basically, he attacks the windows installer component & ban the user to install/play no matter what .exe file that require the help of Win Setup. So in this case change media with a new will not solve the problem. Except for the removal of the virus or system shape. So, you can use free Malwarebytes to scan.

  You can use eset online scanner , scan side by side with

  Microsoft® Windows® malicious software removal tool.

  On the last day of your Windows install 4.5 at the bottom of the link that might help too:

  Windows install 4.5 for 32-bit Windows XP

  Also will help restore registry associated with .exe.

  Conclusion: I'm going to, I said that the title of the thread is not quite right, as you cannot read data from a particular MS Office installation media. But this is not the case with any medium of data disc or installation. At least until your DVD drive so were unable to read all files on the disc, then it might be a pure hardware problem. But as you can see all the files except the .exe files, then there is an uncertain probability of hardware problem.

  Now, you do the analysis & tell me is happening with any media/.exe to install file. Who here has solved your problem

  Ask for additional assistance if necessary.

  S.Chatterjee

• error msg "mcafee.exe is not a valid Win32 application". Why? How to fix?

  How can error msg "mcafee.exe is not a valid Win32 application" I solve?

  Hello

  ·         You are able to install other applications?

  I suggest you to contact McAfee technical support and check out:

  http://service.McAfee.com/TechSupportHome.aspx?LC=1033&SG=TS

  Alternatively, you can try to install the latest Microsoft Security essential and check if it helps.

  Microsoft Security Essentials is free and designed to be simple to install and easy to use. It works quietly and efficiently in the background if you do not have to worry about interruptions or perform updates.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

• TurboTax cd installation problem... Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Error message States "D:\setup.exe is not a valid Win32 application"... What is the solution to allow me to install my TurboTax program?

  Maybe a cd damaged?

  Hello

  ·         What is the service pack installed on your computer?

  There are changes that the CD is damaged. You can copy the file to install it on the computer and then try to install the application, and check.

  To install TurboTax, the condition of basic system for Windows is:

  Minimum system requirements

  Processor: 1 GHz 32-bit (x 86) or faster processor

  Operating systems:

  Windows XP (32-bit) Home edition or professional with Service Pack 3 or higher; or

  Windows Vista (32 - bit and 64 - bit) Home Basic/Home Premium/Professional/ultimate; or

  Windows 7 (32-bit and 64-bit).

  Administrator rights required to install and use TurboTax.

  RAM: 512 MB RAM (1 GB recommended)

  Hard drive space *.

  * Must be on the same drive that TurboTax is installed on

  ·         Federal products: 500 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  ·         Products from the States: 15 MB

  ·         Federal more State products: 515 MB for TurboTax (plus up to 1.5 GB for Microsoft .NET 4 if not already installed)

  Reader of CD-ROM: 2 X CD-ROM drive

  Monitor: recommended 800 × 600 resolution (1024 × 768) screen

  Internet access (required):

  Modem 56 Kbps (connection broadband recommended)

  Other software:

  ·         Microsoft .NET 4 (included with TurboTax Installer)

  ·         Adobe Reader 8 +.

  Printer: Windows compatible ink jet or laser printer

  Hope this information is useful.

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• try to install windows live gives the error: [2] wlsetup-web .exe is not a valid Win32 application

  Help! get this message when I try to download windows live

  Does anyone know how to fix this, so that I can download windows live.  This is the error message I get.  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\Content.IES\Z2VARPB8\wlsetup-web[2].exe is not a valid Win32 application.

  Hello
   
  1. are you able to download and install other programs?
  2. what browser do you use?
   
  Remove all files in the Temporary Internet Files folder and try to re - upload and check.
  C:\Documents and Settings\Beverly\local Settings\Temporary Internet Files\
   
  Also delete temporary internet files from the browser.
  Delete temporary Internet files
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files (this section applies to internet explore 7 & 8)

  Contact team for software issues with windows live windows live support.

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

• Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application

  Original title: ukohixowe.dll

  I have the following error message appears whenever I start Windows Vista:

  Error loading C:\Users\Bo\AppData\Local\ukohixowe.dll
  C:\Users\Bo\AppData\Local\ukohixowe.dll is not a valid Win32 application.
  In addition to the error message when my PC goes into mode 'sleep' & the monitor turns off, I am unable to wake up the screen saver.
  What is this error and how to fix it & the problem of monitor

  Hi Adrien,.

  According to the description, it seems that you are having problems with the startup error message and the computer doesn't wake up from its sleep.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: For the question about the computer is not waking from sleep, you may read the following article and check.

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

   

  http://support.Microsoft.com/kb/930091

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• "Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll KBDKYR9.dll is not a valid Win32 Application" message at startup.

  Original title: error kbdkyr9.dll

  I get this error code when I start my computer on the desktop a box appears and says

  Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll

  KBDKYR9.dll is not a valid Win32 Application

  Can someone help me with this please?  Also, I tried to download a fix cleaner and it did nothing... I still have it.

  Nicole

  Hi Nicole,.

  1. what changes have been made to your computer before this error message?

  Follow these steps and check if the problem persists.

  Step 1:

  I suggest you put your computer in a clean boot State.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.

   
  Note: Put your computer in normal mode by following step 7 of the hyperlink after you identify the third-party application that caused the problem to occur

  Step 2:

  It can also be caused by a virus, I wish that you run a full scan of the PC using your updated security software or a scanner using the Microsoft Safety Scanner.

• Files by saying: "not a valid win32 application, error 19" in Vista

  I have a problem with my computer allowing me to open the files, saying they are not a valid win32 application, also I do not be able to update my computer... in my device drivers is teredo tunneling pseudo-interface is saying that it cannot open the file because it configuration in the registry information is incomplete or damaged...

  * original title - invalid win32 application / / error 19 on install *.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner