Similar Questions

• Error 0xc000005 while trying to open the Second Life.

  0xc000005

  I get an error, 0xc000005

  I get an error, 0xc000005, trying to open the Second Life. How can I fix it?

  OT: 0xcooooo5

  Hello

  1. what version of windows 7 (32-bit or 64-bit) is installed on the computer?
  2. don't you make changes to the computer before the show?
  3. are you able to install the game with any problem?

  Second game of life is not compatible with Windows 7 64 bit. I suggest you to see the following link for more information:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=second%20Life&v=Linden%20Lab&UID=1&l=en&pf=0&PI=0&s=second%20Life&OS=64-bit

  Method 1
  If you use Windows 7 32 bit, then I suggest you perform the clean boot. When you perform the clean boot make sure you disable all antivirus and firewall and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you to uninstall and reinstall the game.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Get 0x800703EE and 0 x 80070022 error code while trying to perform the backup in Windows 7.

  * Original title: backup error code windows 7; 0x800703EE when I looked for details: a file was opened from outside. Option: Repeat the backup, or change the settings, I repeated backups and got the error code: 0 x 80070022

  A few weeks ago another backup problem followed a clean boot Advisor do not understand warnings lost a lot of files, but managed to finish the backup and for a few weeks or if weekly backups on my acer aspire was dandy until this week. On the way to this site saw an ad "fix windows errors by downloading this program. I wonder if these ads are genuine and not a virus or malware. you will advise me on how to go about these sorts of things. Thanking you in advance.

  Hi Jamshid,

  I understand the inconvenience that this may cause.

  This problem could occur due to the corruption of system file by the program that you downloaded.

  The fixit or any program you download on the internet could be a source of pollution. It is not recommended to install the advertising programs.

  To resolve this problem, I would like you go to control panel and remove the program downloaded.

  Here is the link to remove the program.

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  You can also use the System File Checker scan to remove the corrupt files.

  SFC (System File Checker) is a tool that scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  http://support.Microsoft.com/kb/929833

  To ensure that your computer is virus-free and spyware, run a scan online using the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue. We will be happy to help you.

• Please help me: I get message "application failed to initialize properly 0xc0150002 error code", when trying to open the trial of Sony Vegas 8.

  Windows XP

  Hello Jamie-94,

  Thanks for posting on the Microsoft answers Forum.

  It looks like something has become corrupted when you tried to install or open your application.
  I want to uninstall the application first.
  Make sure that all the files/folders related to Sony Vegas 8 trial have been removed. This includes My Documents.

  If the file is a .msi, you can use the Microsoft Installer Cleanup utility.
  Click here to download it. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Otherwise, try to install it again and see if you get the same error.
  If still problem, I suggest you post your question in the Forum Sony listed here.

  Hope this help to solve your problem. Please answer if you still need help.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• RunDLL error message: "Werconcpl.dll is not a valid Win32 application" keeps reappearing

  Hello

  I have a Windows 8 operating system and about 2 weeks, I've loaded my computer and an error titled, "RunDLL" appears indicating:

  "There was a problem starting.

  C:\Windows\system32\WerConCpl.dll

  C:\Windows\system32\WerConCpl.dll is not a valid Win32 application. »

  This error message is always popping up to date.

  More information:

  -Another error will appear again once every 30 seconds or so, no matter if I press OK to close. That said, if I left my computer alone for long periods, fifty, maybe even a hundred of these messages would pile on my desk.

  -Many sources I've found seem to point to the idea that the cause of this is a process, probably malware, is set to run this WerConCpl.dll file at startup.  I have not all antivirus programs before that happened. But shortly after that, I installed Malwarebytes and I performed complete tests on Windows Defender and Malwarebytes. Initially, there are some questions that Malwarebytes had found and quarantined, but nothing on Windows Defender. I also tried to clean with a program of free registry: CCleaner. None of them were able to resolve the problem.

  -I then went to my task manager to start Services. I disabled some third-party services that I use, but it is not necessary to start. Other than that, I have not found all third-party programs that are strange or unusual. The rest were associated with my internet (wide com) and bluetooth devices, or Microsoft and Intel.

  -J' tried the solution that others used by running the command line as administrator and in typing "sfc/scannow". However, this does not work, and this error in the following line: "could not Windows Resource Protection start the repair service".

  -I can't do a system restore because I had already done the restore points, which was a bad idea on my part. However, system restore services have problems with the shadow copy of Volume and not more time to work in any case.

  * At the same time where this problem occurred, when looking for the solution to this problem, I found that a number of other things had stopped working on this laptop. I will not list all of them because it's a fairly large list, but this include services such as the Windows Installer Service, Windows Update services, and Windows store. I could do separate posts for all these but I feel like the root of these problems is related to this key error message.

  * If this can help, at his request, I could type in a list of all service issues and error messages associated with them. In general, they can be irrelevant to the topic of this post.

  Thanks for reading this,

  Samxratts

  Hi Sam,

  First of all, I want to thank you for providing the detailed information about this.

  In this scenario, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Start safe mode and check if the same problem persists. If the issue is not still in Mode without failure, then place the computer in a clean boot state and check which program third party/app is causing this problem.

  Step 1: Safe boot mode.

  See the following article from Microsoft Help to start safe mode.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Step 2: put the computer in a clean boot state in order to determine what third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:

  Create a new user account and check if it helps. This is to check if the problem is caused due to any user profile related issues or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please reply with the status of the issue so that we can better help you.

• get the "Connection to the MDEX error" error while trying to open the micro browser

  Hello
  
  I use short tools and Framework 3.1.0 and MDEX 6.3.0.
  
  While trying to open the Workbench UI browser mic to create configurations of page template, I get message drop-down according to:
  
  Connection to the MDEX error. The data service associated with this editor is not properly configured.
  
  Please guide the if you have the slightest idea.
  
  Thank you
  Ben Milot

  I set up different RecordSpotlight editor to use a short instance successfully. What I did is to change apps\ [your app name]\config\editors_config\services\dataservice.json with search short configuration file updated, save the file and run apps\ [your app name]\control\set_editros_config.bat to apply the change.

  To check, you can run apps\ [your order of name]\control\export_site.bat app to export the configuration of your site, updated data service configuration should manifest in the XML of the exported site.

  It will be useful,

  Michelle

• How can I fix 0x8000000a error code if I can open my photos?

  We have just experienced this today error code while trying to transfer some of our hard drive images to a zip drive.  Now, when I go to open most of our photos, I get this error message.  Help!  How can I solve this problem?  Your help is most appreciated.

  Thank you

  Hi 9289,

  Because the pictures are still on your internal hard drive, you can try reformatting check and external hard drive.

  You can try plugging the external drive to another PC to see if the device works it. If Yes, make a backup of the data and try to format the drive.

  Note: Before you reformat the player take a backup of the data.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• a fatal error occurred while trying to sysprep the machine Windows 7

  Install a new copy of Windows 7 64-bit on a computer company dell laptop.
  After completing the installation, I used Windows update to get all the current patches and so forth.
  No other software has been installed. No antivirus at this stage.
  I have disabled the Windows Media Player Network Sharing Service
  I used the original sysprep on the W7 machine.

  I received this error message: a fatal error occurred while trying to sysprep the machine

  Log files show this:

  Setupact.log:
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Setuperr.log:
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 SDDL parameter on the C:\Windows\nvtmpinst\nvcpl.cpl driver file.
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 listing locked files!
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Questions about the deployment of clients in the domain is better handled in the ITPro Forums.

  These answers forums are more oriented to undergo only the consumer of system issues.

  Category: Windows 7 - ITPro.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

  I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

  I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

  Ran the update without any firewall or AV program running and still received the same error.

  AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

  Hi a93svtf,

  This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

  Step 1: Run the fixit available in the article below

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Now, try to install the update

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 0x800106ba trying to open Windows Defender

  clarifying title: Error Code 0x800106ba trying to open Windows Defender.I didn't have McAfee but I uninstalled it. Windows Defender does not always work and always gives the same error code. I'm sick of it. Can someone please!

  Can error 0x800106ba on any attempt to open code I Defender. I also acquired McAfee at some point, but I uninstalled it hundreds of years ago but I still have the same error message whenever I try to open Windows Defender. Help, please

  Hello

  Did you run the McAfee removal tool?

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  =======================================

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What does "an error occurred while trying to add the selected device: average 0xffffffce.»

  Hello

  "I'm in need of answers get the resolved message."

  "an error occurred while trying to add the selected device: 0xffffffce.

  This happens when I try to add my printer Epson WF 3640 in my queue via WIFI.

  Reset the printing on your Mac - Apple Support System

• an error occurred while trying to access the server

  an error occurred while trying to access the server, I get this message when you try to convert, what's the problem, the user of windows 7

  Hi Laura,

  It looks like you can try to access one of the services of Adobe Document Cloud in Adobe Reader. If so, please close the session, and then reconnect.

  If you're still having problems, please try to connect via the web interface at https://cloud.acrobat.com.

  Let us know how it goes!

  Best,

  Sara

• Error detected while trying to perform the work

  Hello world

  
  

  One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: error detected while trying to perform the work

  
  

  When I went to Essbase, I found that when I launched the rule an error pops up:

  
  

  ERROR - 1006059 - invalid block header: illegal block type - please use the IBH Locate/Fix utilities to find or fix the problem of IBH.

  
  

  I read it could be a problem with corrupt blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could give me a help?

  
  

  Kind regards
  

  IBH errors when there is an incompatibility between the .pag file and the index file (.ind). In other words the file pag and .ind file are not synchronized.

  run it separately in maxl

  change the HYPCOLAN database. Invalid_block_headers repair COSTS

  Still the error ibh, then reload metadata and data backups and try to re start batch Scheduler.

  After re - run batch Scheduler the same problem persists, then

  1 save the relational tables of demand in 11.1.1.3

  2 backup essbase objects (rul, otl, CSC, rep)

  Planning enforcement

  (A) create a new planning application

  (B) restore all the 11.1.1.3 relational tables in the newly created application application

  (C) to restart the Services

  (d) copies of objects like .csc, rul, .rep in db (excluding the .otl)

  (e) re - import the data into db

  (f) to run batch Scheduler

  Or you can make use of LCM method

  Try also to optimize your planning applications

  Kind regards

  Sreekumar heraud

• "Year error occurred while trying to access the service.

  Attempts to convert the PDF to Word file. Have done successfully until last week until we started getting an error "year error occurred while trying to access the service.

  Please can you kindly advise on the possible cause?

  Hi quantum recruitment,.

  You try to access the service via a web browser or via Adobe Reader? If you use a browser, please clear the cache and try again or try another browser (see system requirements |) Acrobat.com

  (or a list of supported browsers).

  If you use Reader, choose Help > updates to ensure that you are using the latest version of the player. You must have the 11.0.09 reader.

  Kind regards

  Florence

• Error message ' year error occurred while trying to access the service ' when I try to convert a file?

  When I try to convert a file to PDF or PDF I get the error message ' year error occurred while trying to access the service "what can I do to fix?  I already applied the updates and attempted to correct?

  You could always connect to Acrobat.com directly and use the service via the web site, if it's a critical need.