Error 1335 - corrupted file

Similar Questions

• Error codes & corrupt files

  Hi, can you please help. I have problems with the installation of the updates and software on my laptop: -.

  updated Windows, I get the error code 80200053,
  Microsoft Security Essentials updates, I get the error code 0 x 80240022 (it is a new installation but have not been able to run as unable to update with all definitions)
  Installation of Windows Live Messenger and Mail, I get error code hr:0x8007000d

  I restored my laptop to factory default, but the problem has not been fixed. I still have the same problem but also, I'm unable to download programs such as Java or AVG (before I tried MSE), I get messages affecting either corrupted files or editors unknown/certificates. I have had these problems for more than a week now, actually both my laptop and my desktop partners have the same problems.

  After spending hours searching these forums, I found another user who seems to have the same problems as me and monitoring of the solution developed for example disk cleanup; SFC.exe then checkdisk but the problems have not been resolved. The log of the SFC.exe suggested that some corrupt files could not be repaired and I looked at the results, but to be honest I have no idea what to do about it. The result of checkdisk returned clean well.

  We managed to get a copy of AVG from a CD and run a full scan on the laptop and desktop and no viruses have been detected. The only items listed were cookies of track that have been removed or repaired and 2 items on my laptop Advisor broken digital certificates.

  Can you please help me with this, I don't know what else to do to solve this problem?

  Vista Home Premium 32 bit

  Thank you

  Hi, thanks for getting back to me.

  I followed your instructions and the MSE update failed. I opened as a new thread as suggested.

  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/3b161909-4338-434c-bc0c-0abdbcfce183

• Error codes & corrupt file problems

  Hi, can you please help. I have problems with the installation of the updates and software on my laptop: -.

  updated Windows, I get the error code 80200053,
  Microsoft Security Essentials updates, I get the error code 0 x 80240022 (it is a new installation but have not been able to run as unable to update with all definitions)
  Installation of Windows Live Messenger and Mail, I get error code hr:0x8007000d

  I restored my laptop to factory default, but the problem has not been fixed. I still have the same problem but also, I'm unable to download programs such as Java or AVG (before I tried MSE), I get messages affecting either corrupted files or editors unknown/certificates. I have had these problems for more than a week now, actually both my laptop and my desktop partners have the same problems.

  After spending hours searching these forums, I found another user who seems to have the same problems as me and monitoring of the solution developed for example disk cleanup; SFC.exe then checkdisk but the problems have not been resolved. The log of the SFC.exe suggested that some corrupt files could not be repaired and I looked at the results, but to be honest I have no idea what to do about it. The result of checkdisk returned clean well.

  We managed to get a copy of AVG from a CD and run a full scan on the laptop and desktop and no viruses have been detected. The only items listed were cookies of track that have been removed or repaired and 2 items on my laptop Advisor broken digital certificates.

  Can you please help me with this, I don't know what else to do to solve this problem?

  Vista Home Premium 32 bit

  Thank you

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/7e47c002-a595-45ec-bb70-f662f58f8aa2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 16, corrupted files cannot uninstall/reinstall

  I recently downloaded creative cloud and Flash Professional CC of the trial. Then trying to open Flash I got an error 16. So stupidly, I deleted the files manually thinking I could reinstall just by using creative cloud. However now creative cloud always think installed sound and is unable to uninstall it. I tried to restore the files, but still have error 16 and cannot uninstall by using creative cloud. so I don't know what to do. I also used Creative cloud cleanser but it does not work, after you have reinstalled creative cloud he always thinks its installed and will not let me uninstall it.

  
  

  This is a re-post because the Member of staff who responded to her did not respond when his advice did not work.
  

  Please try: Configuration error. CC, CS. I hope this helps.

• How to analyze and clean errors and/or corrupted files that interfere with the operation of the computer

  I have problems with the slow startup and shutdown and the appearance of the desktop with icons of different size with occasional erratic behavior and unexpected reboots which lead me to believe that I probably have a few errors or corrupted files.

  The system is a gateway E6100 recently updated from XP to Vista Home Premium with upgrade software.

  Is there a software out there that I can use to clean the entire system?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error 1335 during installation of NI LABVIEW Run time engine 2009

  Hello

  When installing Labview 2009, I get the following error.

  Error 1335: The file 'mib100.cab' required for the installation is damaged and cannot be used. This may indicate a network error, error reading from the CD-ROM, or a problem with this package.

  I tried to install the software using 2 different CD-ROMs, and hard drive. I also uninstalled software OR previous and tried to install Labview again.

  Screenshot of error during the installation of the hard disk is attached.

  Thanks in advance,

  Hyacinth D

  The installation was successful, after replacing the DVD drive.

  Thank you!

  Corinne

• vCenter Converter: Installshield Error 1335 data1.cab P2V Wizard

  I'm installing vCenter Converter v4.3 (P2V) on a Windows XP SP3 computer.

  The installation process fails with:

  "Error 1335: Cabinet file data1.cab required for this installation is damaged and cannot be used.".

  This is an error of Installshield Wizard.

  I checked the Md5 of the file installation (VMware converter-all-4.3.0 - 292238.exe) and it is correct.

  I used a copy of the installer on another computer Windows XP SP3, and installed correctly.

  I tried the following unsuccesully, the same error occurs each time:

  1 / /Unregister and then/regserver MSIEXEC

  2 / deleted MSI. DLL, MSIEXEC. DLL, MSIHND. DLL and re-installed the latest Installer Microsoft MSI v4.5.

  3 / delete C:\Program Files\Common InstallShield

  4 / implemented a fix registry CAB file.

  5 / rebooted the PC in a minimum configuration (MSCONFIG to disable all services by default, no provision of the automatic launch at system startup, but)

  6. completely uninstalled antivirus, firewall

  7 / made sure the path of the destination folder is short (ex. C:\VMC)

  Any suggestions please let me know.

  Randy

  during extraction worked among other files, you should find an MSI - you can doubleclick as MSI

• Error 1335 the data4.cab file is corrupt and cannot be used, what I have to do

  Error 1335 the data4.cab file is corrupt and cannot be used, what I have to do

  Hi Max210662,

  Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .

  Kind regards

  Romit Sinha

• Installation procedures w / all Cal Exec, getting corrupt files Error 1335.

  We bought just Calibration Executive v3.3 with all procedures, then we can expand our capabilities in the laboratory of metrology. While installing procedures of the discs, I get errors of corruption (1335) for all the cabins on each disc. I tried to copy the disks to the hard drive and get the same error. We are running windows xp w/sp2. Any ideas what's wrong with the discs? I have a minimal programming experience, but am willing to do all that is necessary to get the software running and upward. We are down in this area, as I removed the old Cal Exec 2.0 already.

  Have you tried it on another computer just to make sure that's not the optical drive? You should also try to temporarily disable all antivirus software. It is possible you have a bad batch of discs - it has been known to occur. If you contact your representative local sales OR they may be able to get you a new together pretty quickly. Maybe even to stay overnight it to you.

• Error 1335: Data1.cab corrupt or the source file is damaged and can not download

  Recently I formatted my hard drive and installed windows xp professional 64-bit and had no problem installing updates automatic and all my drivers but then a few reboots later, after installation I started to receive an error message saying "the source file is damaged" or "the cab data1.cab file is corrupt and cannot be used. I never had problems like this on my windows xp home edition. Do you know how can I solve this problem?

  I tried to install programs on different browsers, removing all my temporary files and choosing a different download location.

  Thank you very much

  Cort

  Hello Cort Adkins,

  Issues such as this error, "the source file is corrupted" is usually a RAM problem. If you have several sticks of RAM, removel, restart and test.
  It is best to test a bar at a time until you find the one that is causing the error to corruption.

  Go to the Start button and in the search box, type in memory. This will bring up a Memory Diagnostic Test.
  You can also test RAM using an application like Memtest.

  Please answer back with an update and let us know if it helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Tried to install downloaded like mozilla and google chat .exe files but recover corrupted file error!

  I just new laptop ASUS K42F with Windows 7 Home. Tried to install the basic downloaded such as Mozilla and Google Chat programs, but continue to get the "corrupted file error (more information go to nsis.sf.net/NSIS_error). How to remedy this situation so that I can download updates etc in the future.

  Hello

  There are many different factors can be attributed to your question.  It could be your network card, a problem with your ISP, Modem, or any other number of things.  Something happens during the download process that causes your files get corrupted.  We would like a little more info to help solve your problem.

  Are you connected via a wired or wireless?
  If you are connected wireless; you could try to connect with a wire and then try the downloads.

  Who is your Internet service provider, and what kind of equipment do you use to connect to their service? 

  You may have a faulty modem.  You can call most of the suppliers and ask them to test your equipment/connection to see if it is the problem.

  You have other computers on your network?

  If the answer is "Yes"; do you have the same results as the download of files on them?

  All type of internet security applications or third-party firewall you use?

  If the answer is "Yes";  try temporarily disabling them and download your files.

  You are connected to a router?

  If you are, try to connect directly to the modem and see what kind of results you get.

  If none of this helps, please post your hardware specs so that we can give you more troubleshooting steps

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• Corrupted file error message Windows...

  I get the above error message title...  I ran 'chkdsk' several times and it has still not corrected this error... what needs to be done at this point?  The error is:

  The file or directory C:\System Volume Information\_restore {94800E57-BEBA-4742-B1DB-66A7419215AB} \RP341 is corrupt.

  Thanks a lot Elizabeth23 for your answer to my problem.  After much trial and error to try to remedy my situation, I took my computer to my friend who has a knowing computers and he was able to quickly locate the corrupted file and remove it from my system.  I appreciate your suggestions and will keep on place by chance I should run into a similar situation like this even once.  :-)  I'll definitely check these links about detection of malicious software programs.

• Error 1335 the Cabinet file

  Hello

  When I install Microsoft Flight Simulator X, I get the error message 1603. But before I got this messase that I get an Error 1335 the Cabinet File "D1 ~ 10.CAB '.

  I copied all files from drive 1 and 2 on my hard drive and I still get the same message.

  Help, please

  Hello

  Cabinet (or CAB) is a file format to archive for Microsoft Windows that supports compression without loss of data and embedded digital certificates used to maintain the integrity of the archive. CAB files have .cab file name extensions.

  Install the game in the clean boot and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Windows - (various) corrupted file errors. Unable to run chkdsk. Windows XP Home Edition

  Hello

  I hope someone can help me with these error messages; which seem to vary what I do on my computer.  First error message is Windows - file corrupted the file or the directory c:\Program files Symantec Shared Shared\EENGINE\EPERSIST common. DAT is damaged and unreadable. Please run the chkdsk utility. The second error Google Update.exe - corrupted file as the c:WINDOWS\Temp\GUR2.tmp file or directory is corrupted and unreadable. Please run the chkdsk utility.  Unable to run chkdsk by using my computer or command prompt.  System message - cannot open volume for direct access or CHKDSK cannot continue in read-only mode.  Running fsutil dirty query c: Volume-c: is dirty message.  I also have experience from time to time a process loop at startup where the computer keeps turning off and then restarting.  Thank you

  Hello

  ·        Since when are you facing this problem?

  Method 1:

  You can run the check disk by booting in safe mode and check if that helps. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

  Once you start mode without fail, try and run the disk check and check errors.

  Method 2:

  If you are not able to run the check disk in safe mode, you will need to boot into the recovery console, and then run check say. To do this, you need the Windows XP installation disc. The enforcement procedure checks the disk in the recovery console.

  (a) Insert the Windows XP CD-ROM into the CD-ROM drive and restart the computer.
  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  (b) when the "Welcome to Setup" screen appears, press R to start the Console history.
  Note: If you have a dual-boot or multiboot, select the installation that you want to access from Console history.

  (c) when you are prompted to do so, type theAdministrator password. If the administrator password is blank, just C:.

  (d) to historic Console command prompt, type the following then C::

  Chkdsk /r

  (e) allow to run INTACT until the completion

  (f) report any error

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.