Error 1706. SFR. MSI cannot be installed

  1. (A) whenever I start my computer, Windows install comes up with not being able to install SFR. MSI. I had a kodak printer I have files dispossed of and demolished my system.  How can I stop this.
  1. Computer error report also said: a device has a configuration problem that prevents it from starting correctly.
Details:

The device, Realtek High Definition Audio, failed to start correctly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for this device is ROOT\MEDIA\0000

I updated the driver and it says it works normally, and it always happens

Hi Maggie1930,

1. Once you get the Realtek audio may not start successfully message?

2. did you of recent changes on the computer?

3. do you have the problems of sound on the computer?

Method 1

The SFR.msi error is related to the Kodak printer, I suggest that you make sure that you uninstall all the drivers and the software associated with the Kodak printer computer, you can also check in the Kodak for any uninstall program.

How can I uninstall the printer drivers and software Home Center KODAK all-in-One of my computer running a WINDOWS operating system?

http://support.en.kodak.com/app/answers/detail/A_ID/1346/~/how-do-i-uninstall-the-printer-drivers-and-Kodak-all-in-one-home-center

Method 2

If the above fails, then I would suggest that you put the computer in a clean boot state and check if the problem persists. This is to verify if a third-party program installed on the computer causes the error to start on the computer.

To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

See the link below to learn more about how to clean boot.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Reset the computer to start as usual

When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

(a) click Start, type msconfig in the search box and press ENTER.

(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

(c) under the general tab, click the Normal startup option, and then click OK.

(d) when you are prompted to restart the computer, click on restart.

Method 3

If the previous step fails, then I suggest that you completely uninstall the drivers from the sound card of the computer and then reinstall the latest drivers for sound card by visiting the site of computer manufacturer, check if it works.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • When I install visualfoxpro7.0 then the error "the upgrade patch cannot be installed by windows install."

    When I install visualfoxpro7.0 then the error "the upgrade patch cannot be installed by the windows service install because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program." Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »

    Please solve it

    Hi BL,

    The question you posted would be better suited in the Forums of Visual FoxPro. I would recommend posting your query in the Forums of Visual FoxPro.

    http://social.msdn.Microsoft.com/forums/EU/visualfoxprogeneral/threads

  • I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system

    I try to install Captivate on my computer, but I get an error that this product cannot be installed on a 64-bit system...

    Not continue where to go from here?

    Hi Maurice.

    Thanks for the answer, I believe, a 32-bit operating system. I ended up searching on Google I found a download for 8 Captivate for 32-bit, but I can't find 9 Captivate to download 32 bit...

    Adobe - Adobe Captivate Support Center: downloads

  • ERROR: DW006: Apple package cannot be installed successfully. ERROR: installer of third Adobe Acrobat Pro Installer.pkg XI payload failed with exit code: 1

    Hi all, anyone having this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.

    Also Adobe CC, BASICALLY, HE just left and I had to uninstall, re install, and I get this

    ERROR: DW006: Apple package cannot be installed successfully.

    ERROR: installer of third Adobe Acrobat Pro Installer.pkg XI payload failed with exit code: 1

    Anyone with the same questions...

    Also, I came across this problem. When I tried to install it using the direct Installer (linked to http://prodesigntools.com/adobe-cc-2015-direct-download-links.html), it has not as well, but the error log said:

    Mar 23 17:02:23 MacBook Pro installed [313]:. / postinstall: error in the conversion of the plist format xml1 /Library/Preferences/com.adobe.PDFAdminSettings.plist

    Mar 23 17:02:23 MacBook Pro installed [313]:. / postinstall: could not install PDFAdminSettings

    So I deleted "/ Library/Preferences/com.adobe.PDFAdminSettings.plist" (it was an empty file) and re-directed the installation program. This time he succeeded.

  • Error message: this application cannot be installed because...

    I get an error message when I try to install the trial version of Muse on a Mac OS X 10.8.2.Screen Shot 2012-11-23 at 09.08.29.png

    What should I do? I downloaded it several times over different days, and I still get the same problem.

    Please try to download and install using the Adobe Application Manager to https://creative.adobe.com/.

  • CC desktop cannot be installed.  Error code: 50

    I tried to connect to Photoshop and received an error message missing this application manager and reinstall.  Follow the link to reinstall CC.

    When I tried to install, I got the error ' creative Office Cloud cannot be installed. "  Error code: 50 "

    I tried to reinstall.  Same mistake.

    But now when I try to run Photoshop, I get a CC window that says I have to renew my subscription.    My subscription is current.

    Any ideas?

    Thank you

    Kathy

    Windows 7

    CC per subscription

    Error "Unable to install" received when installing Adobe Creative Cloud desktop application

  • Help install error 1706

    I get error 1706 when I try to install Adobe Acrobat X ver 10. I'm not installing a disc, but I continue to be asked to go to a disk for a file. What can I do?

    Thank you, Edgar

    This indicates there may be problems with where you register made reference the installation files.  I would recommend that you try cleaning Acrobat tool located in http://labs.adobe.com/downloads/acrobatcleaner.html.

  • Windows cannot be installed to this disk. The selected disk is a MBR patition table.

    I recently bought a desktop computer with Windows 7 Home Premium x 64 preinstalled (OEM). I tried to install Windows 7 Ultimate x 64 on this computer, but I received the following error message:

    Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks.

    The 1 TB of HARD drive on this computer has three partitions:

    NTFS SYSTEM 100 - healthy (System, the Active Primary Partition)

    OPERATING SYSTEM (C :)) 9148.04 GB NTFS - healthy (start, page file, crash dump, primary Partition))

    HP_RECOVERY (D :)) 13.37 GB NTFS - healthy (Primary Partition))

    Please advice. Thanks in advance.

    I'm trying to install a new copy of Windows.

    Disconnect your 2nd monitor temporarily, then go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

    If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
    Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • error message when you try to install lightroom cc on your Mac.

    I downloaded photoshop cc and installed successfully, having contracted a monthly sub for her and lightroom CC with lightroom, I receive the following error message (I install on a macbook pro)

    Exit code: 7
    Please see specific errors below for troubleshooting. For example, ERROR: DW006...

    -------------------------------------- Summary --------------------------------------
    -0 fatal Error (s), 2 error (s)

    - Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80}.
    ERROR: DW006: Apple package cannot be installed successfully.
    ERROR: third charge useful Adobe Photoshop Lightroom 5 installer. pkg failed with exit code: 1
    -------------------------------------------------------------------------------------

    http://helpx.Adobe.com/Lightroom/KB/exit-code-7-displays-installing.html

  • Error 1706: (cannot install KB2416447)

    Original title: error NPD1-1sp1-KB2416447 - x 86

    I tried to heal by installing the following

    Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

    but I'm told

    The system you are trying to use is on a network unavailable resource. Find the folder containing the installation package 'netfx.msi '.

    Error 1706: valid no source is found for the Microsoft.NET Framework 1.1 product.  The Windows Installer cannot continue.

    and I can't find anything on netfx.msi anywhere on my computer.

    How can I fix this very annoying problem?

    Hi Brock64,

    Method 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2:

    You can access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer and try to install the update.

    http://support.Microsoft.com/kb/923100

    You can also read the following article and check if it helps:

    http://support.Microsoft.com/kb/2416447

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • cannot use adobe reader have tried to re install, but get error 1706

    I orriginally had the Adobe reader, it is has stopped working, when I tried to start it asks me to sign the license but accept becomes unavailable so I must decline [the only thing available] tried to recharge but it won't I get error 1706.

    Try using Setup http://get.adobe.com/reader/enterprise/ offline

  • error 1601 of MSI. 4.5 dll when you try to install programs.

    I get an error 1601 of MSI. 4.5 dll when trying to install some software. The installion fails. Has anyone dealt with this issue?

    Hello

    1. is the question specific to a particular program?

    2. What is the exact error message you get?

    3. did you of recent changes to the computer before the show?

    I suggest the following methods and check if it helps.

    Method 1: Fix problems with programs that cannot be installed or uninstalled

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    Method 2: "Windows Installer service could not be accessed" error when you try to add or remove a program in Windows XP or Windows Server 2003

    http://support.Microsoft.com/kb/315346
    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:   http://support.microsoft.com/kb/322756/

  • I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

    I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

    Try to reset the App Store:

    Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

    Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

    Then reconnect to the iTunes Store.

    Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

  • After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

    After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

    If you see the lock of Activation screen after update your iOS device, you want to try the following:

    -Restart your iOS device and try to connect again.

    -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

    -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

    -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

    -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

    I hope that helps!

  • Cannot download Fallensword Helper Scripts. Get ' Script cannot be installed error: failed @require json2.js.

    Hello, I did a disk eraser and reinstalled everything (to clean computers), then when I had to reinstall firefox I had a problem. I play a game called Fallensword. He has a script called Fallenswordhelper. So I installed GreaseMonkey, then when I tried to install the scripts said "Script cannot be installed error: failed @require json2.js. I did it for my computer every year since I started to use computers. I've never had this before. Please help me to get a fix for this, because I google it and cannot find an answer.

    I am the original author of FallenSwordHelper. It was due to some changes in GreaseMonkey 0.9.0, which made it impossible to have local scripts.

    I did an update (temporary?) so that extra all scripts (such as json2.js) now use absolute URLS.

    See also the official website of FSH

Maybe you are looking for