Error 20 (what?)

Similar Questions

• I am trying to download images from a compact flash player map, but every time my computer shows i/o device error. What does that mean?

  I am trying to download pictures from a card compact flash player map, but every time my computer shows i/o device error. What does that mean?

  Hi Richard,

  1. what version of Windows you are using on the computer?

  2. have you checked if the problem persists in a different USB port and in another computer?

  3 - is the card compact flash not detected in Device Manager?

  A Secure Digital or SD memory card is a device of small portable storage usually used on a digital camera or camcorder, cell phone, or computer system. When you use the card, you may sometimes experience an IO error. The term "i/o" is refers to an input/output error and may involve the SD itself card or the card reader you are using.

  Try these methods:

  Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Eject the SD card in the card reader and check the writing on the side protection tab. This tab should be in the up position; otherwise, you will not be able to save all data on the card. Also check the connection between the computer and the SD card reader. If the card reader is not properly connected to the computer, you will receive error messages when you try to use the SD card or your computer does not recognize the card.

  Response with more information to help you. Back to us for any problem related to Windows. We will be happy to help you.

• Cannot create an excerpt from the DVD - unspecified error. What can I do?

  Trying to create a DVD from windows DVD creation.  When I try to listen to excerpts, video the error screen appears: unspecified error.  What should I do?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of Windows is installed on your computer?

  Reference: http://windows.microsoft.com/en-US/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Try to change Windows DVD Maker DVD-Video settings and check.
  Reference: http://windows.microsoft.com/en-US/windows7/Change-Windows-DVD-Maker-DVD-Video-settings

  Method 2:

  Check if the audio and video filters are causing this issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Also, please take a look at the article.
  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Clean boot your computer performance.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as Normal mentioned in step 7 in the above article.

  Method 4:

  Try to perform a SFC scan on your computer and check to see if that fixes the problem on your computer.

  Click on the link below and follow the instructions in the article.

  http://support.Microsoft.com/kb/929833

  Use / scannow command from the command prompt.

  Note:

  ·         You must be logged on as administrator to run sfc.

  ·         /scannow: Scans all protected system files immediately.

  ·         If sfc detects that a protected file has been replaced, it retrieves the correct version of the file from the %systemroot%\system32\dllcache folder, and then replaces the incorrect file.

  If the %systemroot%\system32\dllcache folder is corrupt or unusable, use sfc/scannowto repair the contents of the Dllcache directory.

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• 84 40007 error code: what to do?

  When Windows Update: 84 40007 error Code: what to do?

  Hi Bla_Blabla,

  Unfortunately, this community is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
  http://support.Microsoft.com/common/international.aspx

  Have a great day and thank you for your visit.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• All light Emily let me (security certificate expired) and an error in what is the ssl solution

  All light Emily let me (security certificate expired) and an error in what is the ssl solution

  Hello

  ·         What is you receive the exact error message?

  ·         When you receive the security error certificate expired?

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• When downliading updates 1 pop with a 670 error code what does this mean

  When the download of updates 3 of 4 downloaded but the last one appears with a 670 error code, what it means?

  Hello

  I suggest you try to execute this fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Also, try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

  Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

  Hi JamesParwulski,

  Method 1
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
  http://support.Microsoft.com/kb/929833

  Method 2
  I suggest you perform a checkdisk.

  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Need help, my computer hangs at this message

  Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp

  Hello

  1. when exactly do you get this error message?

  2 are you able to start in the Office?

  3 have there been recent changes to the computer before the show?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful.

• Nice day! I bought the Adobe Premiere, but I can't download it displays error 72 what to do?

  Nice day! I bought the Adobe Premiere, but I can't download it displays error 72 what to do?

  Hello

  Please try

  https://forums.Adobe.com/thread/1493018?start=0&TSTART=0

  Still need help please contact support https://helpx.adobe.com/contact.html

  Contact the customer service

  Thank you

• I can't setting upward. (error 43) What can I do?

  I can not set up (Adobe photoshop). (error 43) What can I do?

  Hi Yusinw41834365,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

• I can't spend my creative cloud error 1001, what todo

  I have a MacPro from 2013 with Yasemite and CC have an update, but it will refresh no more than 5%, then a message pops up "error 1001" what can I do?

  Thank you for coming back to us.

  We had a conversation with one of your experts and he took over the Mac,

  After about 35 mins., he is back to normal and everything works.

  This is a wonderfull service you give, thank you very much!

  all the best

  Finn Bjerre Studio

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I have to renew the admittance of covers offered by my University pass, but the product (the redemption code) code gives me error. What can I do?

  I have to renew the admittance of covers offered by my University pass, but the product (the redemption code) code gives me error. What can I do?

  Hello

  Please help us to better understand.

  What is the error you get?

  In the meantime, you can also check: -.

  -Help code them redemption

  How activate/redeem redemption Adobe CC Code

• When I download creative cloud and go into apps download illustrator, under the applications section, it says download error. tried to download several times more, again the same error. What can I do?

  When I download creative cloud and go into apps download illustrator, under the applications section, it says download error. tried to download several times more, again the same error. What can I do?

  Hello

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

  Kind regards

  Sheena