error 322 when reinstalling the wireless modem

Similar Questions

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Receive an error message when updating the iPad to 9.2.  What should do?

  Receive an error message when updating the iPad to 9.2.  What should do?

  What is the wording accurate and complete error message? What troubleshooting

  did you?

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Hello mnaveen.kumar,

  Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  You can try to manually create the key to see if this will help.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• Error occurred when parsing the plug-in software

  I'm upgrading to 11g 11.1.0.1.0 Cloud control grid control 12.1.0.3.0 using 1-system approach. And I patched to the pre-upgrade console.

  After that I downloaded all the agents and plugins form upgrade to Oracle Enterprise Manager Cloud control 12.1 & lt; / title & gt; & lt; meta name = & quot; Title & quot; content = & quot; Upgra...

  When I try to validate the software, you can validate only agents, for the plugins, it displays:

  I use the root user, and zip files are all 777, unzip it works, I can see the plugin_bin file in my directory, but it is empty

  Thanks for any help!

  Error occurred when parsing the plug-in software. Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.em.smss_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.db_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.emrep_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.csa_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.beacon_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.5.0_oracle.sysman.emas_2000_0.zip Impossible to validate sar agent software: /tmp/plugins/12.1.0.3.0_oracle.sysman.oh_2000_0.zip

  Hello

  Please note the plugin software used in the upgrade page 12 c Console is different from the one used during the upgrade of the WHO, so please make sure that the correct software is used

  1. navigate to the following location, where the binaries of software are installed and verify the plugin .opar file listed in the error message:

  $ cd <12c_OMS_HOME>/sysman/install/undeployed_plugins

  If available, copy them to a location that is accessible.

  2. If the plugin Internet files do not exist in the 12 c SGD Oracle Home, then download and stage the agent and software plugins correctly in the intermediate directory from the following URL.

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/OEM-upgrade-console-502238.html

  After you download the software and verify that the intermediate directory is properly referenced, run again the validation of the software.

  Check also the steps are as

  EM 12: the upgrade of the 11.1.0.1 Enterprise Manager on Linux x86_64 to 12.1.0.1 with method 1-System (Doc ID 1364931.1)

  Kind regards

  Rahul

• ODI-40837 ERROR: an error occurred when creating the schema

  Hi I'm testing a file xml server and receive the following error message.
  
  ODI-40837 ERROR: an error occurred when creating the schema: ODI-40738: SAXException has been surprised by reading the model saying: expected 'DOCTYPE '.
  
  
  JDBC URL jdbc:snps:xml?f=C:/Projects/prd.xml & ro = true & DOD = YES
  
  could someone help because I can not find any blog or documentation on this error?
  
  Thank you
  
  Published by: user626688 on May 31, 2013 13:26

  There seems to be a problem with your xml file. Please work with channel support to investigate this issue.
  You can also view the details of settings xml driver to http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDECBHH

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Error 1002 when installing the desktop creative cloud application

  I too am a very frustrated Adobe user. I use a Macbook Pro with 10.10.5 as the operating system.

  My problem is the same that many other people, I am unable to upgrade Creative Cloud Desktop to the 3.8.0310 version and still get error 1002 to the 2% mark. I have tried virtually all the "stuff" in the book, those recommended by Adobe and those blogs, and nothing works. I have even directly connected to my internet provider, without going through my wi - fi modem and using their connection broadband.

  Up to what Adobe ceased to provide Direct download links, I was able to update my software. My problem has always been that Creative Cloud Desktop will put not to date to the next version, and what happened on my first Mac as well. If Adobe wants to stop direct links, so why can he not at least make sure that the application works 100% of the time for 100% of its loyal customers. You are deflected us Adobe with your policies, especially now that many people use other software that may not be as powerful as Adobe programs, but at least they are reliable.

  Bob C.

  Pleiades_k that you have received error messages when you perform the steps mentioned above?  He was facing difficulties to locate the OOBE folder?

  I would recommend that you run the utility for uninstalling desktop available creative cloud application during the uninstall of the desktop Adobe Creative cloud application , and then try to reinstall the updated version.

  If you continue to experience difficulties, please contact our team of support directly in Contact with the customer.

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Reinstall the wireless adapter issues

  I just had to do a recovery on my system last night after serious problems and as such I am back to square 1. I am trying to reinstall my Linksys Wireless-G USB Network Adapter (model # WUSB54G S ver. 2) and unfortunately I lost my CD for it. I downloaded driver for v.2 data and tried to make a facility a couple of times and I can't get the adapter is properly recognized. Even attaching to the cable part of the network display anything. Is there a separate file, I'm only away/can get that is specifically for the adapter, since I don't plan on using the wireless monitor software? Any information on the situation would be greatly appreciated.

  Scratch that, figured it out. A letter was missing when I was the driver, fixed selection and now it's all workers

• Blue error screen when indexing the files on Vista computer

  Original title: Problem Event Name:_BlueScreen__ OS Version:_6.0.6002.2.2.0.768.3__ Locale ID:_1033__

  BCCode: f4

  BCP1: 00000003

  BCP2: 872E2D90

  BCP3: 872E2EDC

  BCP4: 81E33710

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Before I tear off my hard drive and throw it out the window, please tell me I can recover from this error. The above error when I try to rebuild my Index. I regularly get messages "index has stopped working". I select the indexer rebuild to the original configuration. He tried to do, but stopped after the indexing of files about 1700, restarted, and then returned with the above event. I had several problems with my OS for a few days. I have run chkdsk and chkdsk/r several times. I use Norton 360, analysis tell me that all files are up to date, Windows update is performed regularly and is up to date. I was initially received an error "parameter has exceeded its normal range" train SMART. I disabled this option considered, but service to have problems with my system. Everything seems to work okay in safe mode, where I am now. I am at a loss. I have a recovery partition on my drive, but did not know what options to use. I have the installation CD Vista too, but avoided to reinstall, have done this before for another question. For any help or suggestion will be greatly appreciated. Please see my other post earlier this week, I was only partially successful with this process. Thank you very much!

  Hello

  If a PC remove all power to the system:

  Check and replace the cards, memory and cables (at both ends) actually remove and replace
  -do not just tight. Memory could be the problem, so if you have more than 1 stick swap
  in and out to see if the problem follows a stick or try the new memory. How to test
  memory in the next message.

  -------------------------------------------------------------------------------------------------------

  Pick up the pieces after a computer crash - includes "what to do if Windows doesn't.
  start correctly'.
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check wiring for hard drive.

  ======================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0 x 3 : Process of 0 x 6 : Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  -----------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem persists, reinstall the Wireless C7280 All in One

  1. wireless all-in one C7280

  2 XP Service Pack 3

  3. all Windows updates

  4.1.2G memory

  I had some frustrating problems, persistent re - install this printer on this same machine short of a full recovery of the laptop. (see below) I installed it on a small netbook which is a pain to use, I want to use it again on this laptop big.

  I've tried everything. The search of the registry for each occurrence of HP C7200 etc. and eliminating them. When the startup disk gives the possibility to uninstall anything HP is said there are none. Yet everytime I try to reinstall the software, it says it has already installed everything that I have to do is add the device. It is not installed, I deleted all occurrences of it. Is there a magic bullet that will still allow me to re - install the software?  I have the new full download, no installation disc.  If I click on install starts but then soon reports there is no wireless device. The printer is only a few feet away. I restored the default printer. Anyway... no dice.  The printer itself is also not visible display network FAVORITES, which I should be.  Blasted... Heck!  ":-\

  It's a Toshiba Satellite compressed, these old tablets not newbies thins with the swivel screen. This software has always been a problem and turned off. He worked for some time OK.  But not using every day I can't identify any specific problems when he had to start.  Installs has always been a little touchy.

  The printer is great, that the software is so sensitive and hard to get along with.  Thanks in advance for your generous time and help!  jackdashack

  I tried to write my signature in this area on the screen, but it doesn't seem to work? : v lol

  Lorem_ipsum wrote:

  Hello

  If you go through the menu on the front panel for you wireless connect using the Wireless Setup Wizard? If this is not the case, try this. There are also a few additional steps listed here

  Thank you

  I just posted a serious answer and clicked on the post. For some reason, it does not appear on the forum?  A new test with the installation you have the printer on the network. I can even print on the printer from programs that use the print option. However, installation stalled and has expired and has not gotten to the point this Solution Center has been installed. You know how much that adds the functionality of the C7280. I could do here? He found the printer, there a few features such as a wireless printer but I can't scan and do all the things I have once the laptop. So, is there a way to get the Solution Center? Should I try unistalling and reinstalling again?  The advice is much appreciated. Jack