Error 641 running Windows Update & Microsoft Fixit didn't work - no this installer

Similar Questions

• Error when running Windows Update 8007371C

  WindowsUpdate_8007371C""WindowsUpdate_dt000 error. "

  * title *.
  "I get the following error when you try to run Windows Update, __WindowsUpdate_8007371C '"WindowsUpdate_dt000__Also, I can't get any other updates to run, I saw an error of Windows install/no running msg.

  Steend,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to run windows update, but it will not work.

  I tried everything but windows update will not work. I used scanner security microsoft onecenter and you run virus and spyware scans and defragged my computer and fixed it all. However when I try to run windows update I have a problem that says: Windows Installer of Module: WindowsWcpOtherFailure3. I tried everything and I'm running out of ideas!

  See if the following can help:

  1. how to reset Windows Update Componeants
  http://support.Microsoft.com/kb/971058

  2. system analysis tool:
  http://support.Microsoft.com/kb/947821

  3. how to solve problems
  http://support.Microsoft.com/kb/2438651/en-us

  4.

  Support for Microsoft Update technical problems - troubleshooting

  http://support.Microsoft.com/ph/6527#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My error reports windows 8024402F on run windows update. FixIt unable to solve the problem.

  I was faced this problem of win vista do not update on windows update is running. Error reported is 8024402F. I tried to do a full disk check and also ran mic. FixIt two or three times. The Fixit says that the error has been resolved, but it remains. My security essentials is not also updated and it is also in yellow.

  Please provide assistance.
  Akhilesh Das
  India

  0X8024402F WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS cab file external treatment is completed with errors.

  If you have tried the Fixit the answer, I suggest that you manually advance in long lists

  http://support.Microsoft.com/kb/836941

• Get code error when running Windows Update. Error code: 57.

  Original title: "57 error code"

  When I update my windows vista family premium I get the message
  How to solve this one?

  Hello

  1. did you of recent changes to the system before the show?

  2. What are the news that are listed in the Windows Update?

  Method 1:

  Follow the link below and run the patch tool, check to see if it helps.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Follow the link below, perform the steps and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  In addition, check out the link below and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if it helps.

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Can anyone help with 66A error when running Windows Update?

  Hello. I'm trying to update Windows with an important update, but every time I try it says update failed and gives me an error 66A. Any suggestions? Thank you.

  RobertGallo,

  See the MVP MowGreen response to a previous post, involving the error:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code66a-installing-updates-please-help/b716e9f3-1a83-E011-9b4b-68b599b31bf5>

  05/22 / 1112:38: 48 pm

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  Hello

  I suggest you try all the steps in the following article.
  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates.
  http://support.Microsoft.com/kb/836941

  I hope this helps.

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Update maintains did not give me the error code "646 windows update encountered an unknown error" __Help__Thanks in advance

  Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error number: 0x8024D001 when you run windows update

  Here's my situation, I wiped recently my installation of Win XP Pro x 86 original seven ' 07, now running in the title error when you run windows update after reinstalling.

  A little of what I've done already;

  • http://support.Microsoft.com/kb/2497281/en-us
  • I went through the steps to download and win xp sp3 app, have always error WU (will abreviate Windows Update this for now).
  • To run Microsoft fix it found 50777 persists.
  • Has been through the steps in the method 1: save the Windows Update files. Problem persists
  • Spent by method 2: replace the folder C:\Windows\SoftwareDistribution Windows Update. Problem persists.

  Next

  • Check which version of the .net framework is installed. Found v2.0.50727 (I was referring to this page http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-xp-update-error-number-0x8024d001/d3f8b64e-0532-40ec-beb4-0bea856d1ef3 )
  • When running .net Framework 2 sp 2 (downloaded from http://www.microsoft.com/en-us/download/confirmation.aspx?id=1639 ) I receive an update confirming that it is already installed.

  Other

  • Set the firewall disabled (I know it is not recommended, but until it's resolved I leave it)
  • Internet Security in IE8 is set to medium
  • IE v8.0.6
  • IE 8 privacy set to low temperature

  Help please? :(

  First, download the .NET Framework here repair tool:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=30135

  If this doesn't fix the problem. try to run .NET Fixit recording:
  http://support.Microsoft.com/kb/976982/en-GB

  Or the other of these two should solve the problem for you, but in the case where it is not, then here are some alternatives:

  • http://support.Microsoft.com/mats/windows_update/
  • http://support.Microsoft.com/kb/822798/en-GB

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.