Error 8024200d while trying to update KB2378111 and KB2564958, KB2345887, KB2633952, KB970430, KB972145 KB967723.

Similar Questions

• Windows Update error 80070003 while trying to install KB2973201 and KB2939153

  Original title: Problem Update 80070003

  Update security for Windows 8 for x 64 systems (KB2973201)
  Update for Windows 8 for x 64 systems (KB2939153)
  all of this update I can not install on my laptop windows 8

  I tried to install it but it shows code error 80070003 & also tried to convenience store, but it does also not

  Here it is...

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press the Windows key + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter

  NOTE: It can take some time to finish the race.

• Satellite A200-TR6 - WinPhlash error 1072 while trying to update BIOS

  I recently bought a 4 GB RAM in this machine. Even though I know that Windows will recognize about 3 GB of it, it seems odd that when I'm in my BIOS, it also sees only 3 GB (at this level he should see all 4 GB, no?).

  I thought I should update my BIOS, maybe that would help. I went and downloaded a update of the BIOS of Toshiba, but when I extract it and run WinPhlash, I get "unable to load driver PhlasNT.sys" and error 1072 - despite being connected both code administrator (see screenshot of error message [here | http://img32.imageshack.us/img32/3213/winphlash.jpg]).

  Any ideas?

  Hello

  Have you tried to download the BIOS update again? Maybe it s only a file corrupted
  And for the update, you need to extract all files from zip archive before you start the update and must be logged in as an administrator.

  Normally you should see the 4 GB of RAM in BIOS, but as you know you can t use the entire 4 GB of RAM on Windows. This is possible on a 64 bit OS.

  Welcome them

• I am getting the Error 1606 while trying to update

  Could you please help me to solve the problem above.  I am running Windows 8.0 Pro. My Adobe Acrobat is Pro XI.

  Thank you for your help.

  Judy Nikkel

  See the following help document:

  Error 1606 | Acrobat 8, 9. CS4:

  http://helpx.Adobe.com/Creative-Suite/KB/Error-1606-install-Acrobat-8.html

• Get the error 0x8024001e in Windows 8 while trying to update and install new applications on the Windows Store

  Hello.

  I wonder if anyone knows why I get 0x8024001e error while trying to update applications or installation of new applications in the app Store of Windows, because it is really frustrating. Also I was wondering why it isn't a place where I can easily find the error codes which means.
  Apps status shows "Download", but the progress bar does not move. Not sure if this is a bug too, but one of my apps (Skydrive) disappeared from my screen, probably due to me trying to update my applications.
  Thanks for your help.

  same here, no luck

  * See my response below for Win8 solution
  Restart
  Windows key + X and turn on the command line (Admin)
  
  Type in the command line:

  net stop wuauserv
  Rename c:\windows\SoftwareDistribution softwaredistribution.old
  net start wuauserv

  Reboot and see if that's the solution

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)

  

• Error code 0000064c while trying to update

  Error code 0000064c while trying to update (dt000) on vista. any help much appreciated.

  Thanx
  Josh

  Hello

  Please provide information on the updates are to receive messages in your windows under Windows Updates. Then you can check if these updates are lying to your windows or not from http://support.microsoft.com.

  For now, try the following steps:

  1. Open the Windows services control panel (Control Panerl--> administrative tools)
  2. Stop the Service of Cryptographic Service, Windows Installer of Module Background Intelligent Transfer and services of Windows updates.
  3. Rename the c:\programs Data\microsoft\network downloader.old Downloader
  4. Rename C:\Windows\SoftwareDistribution in c:\Windows SoftwareDistribution.old
  5. Rename the Catroot2 Catroot2.old to c:\Windows\System32
  6. Restart the Service of Cryptographic Service, Windows Installer of Module Background Intelligent Transfer and services of Windows updates.
  7. Look for the updates.

  You can also try running the FixIt of http://support.microsoft.com/kb/971058/en-us.

  Concerning

• Vista Windows which gives error code 800706BA while trying to update

  After my fatal system crash I have recover my system with recovery system after system installed when Vista tries to update it will take longer then three hours his list update failed and afficherdans code 800706BA error help please how to fix this
  .

  MS released a further update for Windows Vista on August 31
  for these receptors error 800706BA while trying to install an update.
  See http://support.microsoft.com/kb/940520 for more details and download
  links. Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

  I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

  I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

  Ran the update without any firewall or AV program running and still received the same error.

  AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

  Hi a93svtf,

  This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

  Step 1: Run the fixit available in the article below

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Now, try to install the update

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 646. while trying to update, this error code is displayed

  While trying to update, this error code is displayed. What can I do? Y at - there someone who can help me?

  Hello Sergeant115,

  Thank you for using the Microsoft answers Forums.

   

  Solution for error 646:

  Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Restart the computer after the update is installed.

  Also check with

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  http://support.Microsoft.com/kb/822798

  That should solve the problem.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• "Error R6034: an application has made an attempt to load the library runtime C incorrectly." while trying to update iTunes. Tried to reinstall, but get error "Windows error 1114.

  Original title: Runtime Error R6034

  When I was updating my Itunes library, I got a pop window with this message:

  Runtime error
  Program of C:\ Program files (x 86) \itunes exe.
  R6034
  An application has made an attempt to load the C runtime incorrectly library.
  Please contact the team for more information application support
  I tried to repair itunes without success and then uninstalled itunes and tried to reinstall it but when I tried to reinstall I get a different error message (error Windows 1114)
  Can you help me?

  Hello

  This seems to be a new issue facing users of iTunes while trying to update to the latest version of iTunes on Windows 7. I checked in the Apple support sites and found that uninstalling iTunes and then put it back in place, by running the installer with administrator privileges has solved the problem for many users with similar problems.

  You can see the responses made by user turingtest2 in the following threads of the Apple Support forums, the steps are correctly described here:

  https://discussions.Apple.com/message/24609674#24609674

  https://discussions.Apple.com/message/24616175#24616175

  The steps which have been voted as useful for these discussions include:

  First, uninstall each of these programs from your computer:

  • iTunes
  • Apple Software Update
  • Apple Mobile Device Support
  • Hello
  • Apple Application Support

  Then, Download and save the installer for iTunes by clicking on this link: http://www.apple.com/itunes/download/

  And finally, reinstall iTunes by running the installer registered with elevated permissions. Here's how you can do this:

  1. Right click on the installer downloaded.
  2. Click run as administrator.
  3. Click Yes or continue when Windows ask you for your consent.

  This should help you solve this problem. If you are still not able to get the iTunes program works correctly, you can also post your request in the iTunes of Apple Support Forums. Here is the link for forums:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

  Let us know how it goes. We will be pleased to be of further assistance. Thank you and have a nice day!

• Error code 2 while trying to update Creative Cloud Desktop Application.

  I get the error code 2 while trying to update Creative Cloud Desktop Application. MacOs 10.9.5. I use Cloud to use Typekit fonts. Now it doesn't work at all. Updete can't and the old version does not work. Can you help me please?

  Sanna, try the following steps.

  1. Delete creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
  2. Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• slide show does not and 'error occurred while trying to change modules.

  I've been using Lightroom + module slide show for years, but suddenly it does not! When I start lightroom, whenever it says 'an error has occurred while trying to change modules' and I can't listen to extracts, to play or export slideshows. I tried computer restart, does not help. I need for a client this morning! Help please!

  Hi Jeng,

  Please visit the link below and follow the steps.

  Troubleshooting Guide for errors that can occur when you change the modules in Lightroom

  Kind regards

  Assani

• a fatal error occurred while trying to sysprep the machine Windows 7

  Install a new copy of Windows 7 64-bit on a computer company dell laptop.
  After completing the installation, I used Windows update to get all the current patches and so forth.
  No other software has been installed. No antivirus at this stage.
  I have disabled the Windows Media Player Network Sharing Service
  I used the original sysprep on the W7 machine.

  I received this error message: a fatal error occurred while trying to sysprep the machine

  Log files show this:

  Setupact.log:
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Setuperr.log:
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 SDDL parameter on the C:\Windows\nvtmpinst\nvcpl.cpl driver file.
  2009-10-28 08:17:54, error SYSPRP SPPNP: error 0 x 3 listing locked files!
  2009-10-28 08:18:01, error [0x0e00ba] TOOL GeneralizeBcdStore: could not open the BCD to generalize object. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0e00b1] TOOL Sysprep_Generalize_Bcd: it was a mistake to generalize the bcd store. Status = [0xC0000034] [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0082] SYSPRP LaunchDll:Failure occurred during the execution of 'C:\Windows\System32\spbcd.dll,Sysprep_Generalize_Bcd', returned an error code 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f0070] SYSPRP RunExternalDlls: an error occurred running sysprep register dll, put an end to running sysprep. dwRet = 2 [gle = 0 x 00000012]
  2009-10-28 08:18:01, error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize providers internal; HR = 0 x 80070002 [gle = 0 x 00000012]

  Questions about the deployment of clients in the domain is better handled in the ITPro Forums.

  These answers forums are more oriented to undergo only the consumer of system issues.

  Category: Windows 7 - ITPro.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP