ERROR 8024402C

Similar Questions

• Errors 8024402C, 643 and 646 when installing Windows updates

  Original title: 22 code 8024402C, 646, 643 update failure
  Just cancelled anti-wear Virus, now uning microsoft and find several updates not installed.

  I just need to know if updates from ore relevant or not.

  Hello

  Updates are highly recommended. Updates can help to prevent or fix problems, enhance the operation of your computer, or improve your computer
  experience.

  Update error 8024402C may occur for various reasons.

  Step 1:

  Check this link for troubleshooting steps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402C

  Step 2:

  To fix the error 646, you can run the diagnostic article Fixit tool:
  http://support.Microsoft.com/kb/2258121

  Step 3:

  Run Fixit of this article to correct the error 643:
  
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  After you complete the steps, check if you can install the updates.

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Impossible to update Code error 8024402C

  I need help, I get the same error everytime I have to search for updates (Code: 8024402C), it happened after I did a format for my laptop (Windows vista Ultimate Edition), everything was working well until I did the format, and I did the format as I do every time...
  I tried windows help but no use...
  and oh I can't access windows update online, it stops a few seconds after the loading of the page online!

  PS: I don't know if it's related, but I can't spend my I.E7 to I.E8 (although I could before the format)... it says I must not access a site online that suddenly appears on my desktop after I tried the upgrade, I get home and theres no help, but this code : kb 956586!

  Do you not think the upgrade to windows vista SP1 will fix these upwards? I'll try it today and check!
  Thank you for your time

  Rappit says:

  I need help, I get the same error everytime I have to search for updates (Code: 8024402C), it happened after I did a format for my laptop (Windows vista Ultimate Edition), everything was working well until I did the format, and I did the format as I do every time...
  I tried windows help but no use...
  and oh I can't access windows update online, it stops a few seconds after the loading of the page online!

  PS: I don't know if it's related, but I can't spend my I.E7 to I.E8 (although I could before the format)... it says I must not access a site online that suddenly appears on my desktop after I tried the upgrade, I get home and theres no help, but this code : kb 956586!

  Do you not think the upgrade to windows vista SP1 will fix these upwards? I'll try it today and check!
  Thank you for your time

  Check this one out...

  http://support.Microsoft.com/kb/900936 http://support.Microsoft.com/kb/883821

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Cannot install SP2 because of Win update, error 8024402C

  Can someone please?

  Just a new player 160hard had put in my laptop Toshiba, place the recovery disc, all works well tried to connect to internet (wireless) would not work. We called AOL tells me that I need to get service pack 2.

  Tried to update windows telling me error 8024402 c. I know only a little about computers and any advice would be helpful and right AOL saying I need service pack 2. Wi - Fi was working fine before I put the new hard drive and recovery disk in.

  Thank you

  Hello

  You can download SP2 manually from the Microsoft Web page

  Choose the right (32-bit or 64-bit) SP2 to the system that you are using here.
  You can save this on USB and can install this memory USB flash on your computer.

• 2nd error 8024402C

  Hello

  I use Vista 32 bit Business.  This problem has been resolved in early February, returns once again this month.  I did the forum and all the support staff said that already helped me with the same problem with the following suggestions.  However, I can't not do on-site upgrade because it is an OEM Vista without any Windows CD.  I tried also came with the laptop recovery disks and which did not have what he needed to do below.  Please kindly help.

  According to the results of troubleshooting, I think that the problem can be caused by some system files corrupted and I recommed run the system update tool and rename the folder tmporary to solve the problem.

  System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. These inconsistencies can be caused by various hardware failures or software problems. In some cases, these inconsistencies can affect the Windows Service store, and they can cause software updates not do not work. The system update tool attempts to resolve these inconsistencies. When System Update Readiness Tool detects obvious incorrect files or the registry data, it can replace the incorrect data with a corrected version.

  1. download the system preparation tool update from the link below depending on the Type of system:

  Update for Windows Vista 32-bit system tool

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2889489c-ee87-4607-8aa5-812e8078ab27&displaylang=en

  Update for Windows Vista 64-bit system tool

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=14f76773-007c-493f-BECE-243bc21ac73d&displaylang=en

  After that, please try to rerun the update of Windows.

  If the problem persists, it indicates that the corrupted system files cannot be repaired by the system update tool. At this point, I suggest using the tool (SFC.exe) System File Checker to solve the problem:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. scans all system files and get the most corrupt.

  3. restart the computer and reinstall the Windows updates.

  If the updates of Windows may not always be installed, I suggest we do a upgrade in place to repair corrupt system files. I would like to explain that the upgrade in place is a tool to repair the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer.  However, it is recommended that you first back up your important information and files of other partitions or other disks. Then, please do the following:

  Turn off Windows features before you perform an upgrade in place

  ================================================

  1. click on start, then click Control Panel.

  2. click Classic view in the left pane and then double-click programs and features.

  3 click on the pane "Turn Windows features on the left on or off.

  4. in the Windows features dialog box, uncheck all the check boxes and then click OK.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Now perform the following steps to repair corrupted files:

  On-site upgrade

  =============

  1. Insert the Windows Vista DVD in the DVD drive of the computer.

  2. Click Start and select computer.

  3. If please find the "setup.exe" file in the DVD-ROM and double-click it.

  4. click on install now.

  5. when we are invited to enter the product key, please click Next without entering any key. The installation wizard will prompt and ask if you agree to install Windows Vista without the key. Please choose confirm.

  6. When you get to the screen ' which type of installation you want', click upgrade to upgrade the Windows Vista system files.

  Note: All performing the upgrade in place, the system will reboot automatically (several times) to merge the files and programs. Please leave the computer alone and do not set up until the upgrade on the spot. The system should start Windows Vista once it is upgraded.

  -------

  Thank you!
  TIFF

  Hi Tiff,

  Thank you for using Microsoft Vista answers Forum!

  According to the error on your post code, this problem can occur if the proxy or firewall settings are configured incorrectly. In this case, the connection on the client computer on the Windows Update servers fails. To resolve this error, follow the steps described in the article. Make sure that you scroll down to the section that corresponds to the operating system on your machine.

  http://support.Microsoft.com/kb/900936

  If you have passed this stage, then I suggest you go with the recommendation of Joseph on the previous post.

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows Vista Home Premium SP1 NEVER been able update error 8024402C

  I have problems with the update. I've never been able to update Windows since I bought this computer in September 2009.
  I have Vista Home Premium SP1
  I have CA Security Center
  I've also tried the auto detects in the LAN configuration but still does not. Also turned and on the update command in the command prompt.
  Does anyone else have an idea? It is slowly driving me crazy and I should have settled this long time.
  Please I need your help

  Thanks Ness

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update error 8024402C

  I wonder if anyone else has problems installing a security update (KB3143693) and receive 641 errors and/or 8024402 c. I ran all convenience stores to know but without any results to correct the problem. 10 other updates went well, but it fails to install. I am running windows 7 x 64, with browser chrome and IE 11. Any help would be appreciated for any old man.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• I get the Windows Update error 8024402C error after that reinstall full of Windows 8 on my laptop HP-have tried everything

  It keeps giving me this error: the system is to reinstall a totally new - the first thing I did was to go to windows update and this is the error I get.

  Have disabled virus and firewall, and does not use a proxy server. Have tried most of the suggestions but no use. Have reinstalled windows three times with the same problem. Never had a problem before. Please help if you have any ideas.

  http://Support2.Microsoft.com/kb/971058/en-us

  How to reset the Windows Update components?

  If the fixit does not work, refer to the manual procedure.

• Receive the error Windows update 8024402C

  Since I purshased my Studio One 19, I had problems updating my operating system, he never did a complete update, now, I have a big problem with the 16-bit Unsopported Application ' /? '. / C? users/LEO/App Data / Roaming / ABM path? Gaetan exe path;  I have taken several steps already: cleanned drive, unit of desphragmented C, delete some programs, but the problem persists.  How can I get instant assistance via chat or so?

  * original title - found __Error Code Ox80072f76; Unsopported 16 - Bit Application ' /? '. / C? users/LEO/App Data / Roaming / ABM path? Gaetan exe path; "Windows update error - 8024402C."

  Thank you very much

  Concerning

  Hi Leodoit10, m

  Please see the following article some troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024402C

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error Code 8024402C

  My computer is part of a network, and it has received updates via the network.  I have left the company and cannot receive more updates over the network.  However, my computer is set up to think that he is part of a group then, when I try to download updates directly, I get the error 8024402C - an unknown error code.  My question is how to reconfigure my computer so that he sees himself as part of a network, and can download updates directly.  I have administrator privileges.   "I think I just need to know how to change the ' group policy ' my computer (but I could be wrong on this subject...).  Please notify.

  See if anything here relevant to changing the settings

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site
  http://support.Microsoft.com/kb/883821

  You may receive a "0x8024402C" error message when you scan for updates on the Windows Update Web site
  http://support.Microsoft.com/kb/900936

  And also: http://www.updatexp.com/0x8024402c.html

  It must have something to do with the proxy settings.

  You can not use a proxy server: http://support.microsoft.com/kb/900935

  TaurArian [MVP] 2005-2010 - Update Services

• I have error (code 8024402C) in my windows7 upgrade, I need a solotion

  Please help me find a solution for this error

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024402C

• Windows update error 8024402 c.

  OT: 8024402C error.

  I am running Windows 7 RC. Since a few days I started having error 8024402C when Windows 7 try to look for updates. I get a warning to take care of this error, but when I ask more information, Windows returns the message that the error is unknown. If anyone can help?

  Solved by disabling the network bridge updates now works

• Error code: 643 (cannot install updates)

  When obtaining update code 643

  Are you mbaugh2025?

  What about your mistakes.

  Windows Update error 8024402C
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024402C

  Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  You can try just as appropriate repair only the versions of .NET Framework concerned.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

  Try again to WU. If still no joy, you try download the update and install it and if necessary clean boot mode.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Make sure you get one that fits your system:

  http://www.Microsoft.com/download/en/details.aspx?ID=3556

  How to tell: http://support.microsoft.com/kb/827218

• Windows update error code 8024402c__

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  0x8024402C

  You may receive a "0x8024402C" error message when you scan for updates on the windows

  http://support.Microsoft.com/kb/900936  

  Windows Update error 8024402C

  http://windowshelp.Microsoft.com/Windows/en-us/help/261ae42d-8c84-496e-88cb-a46dff5504611033.mspx

• Vista - Error Code: 646 (Microsoft Office 2007 updates)

  I was warned by Windows Update I got Microsoft Office 6 "Major updates" dealing with security to download and install.  I am running Vista Home Premium operating system.

  6 updates are listed here:

  (1) security Update for Microsoft Office Excel 2007 (KB982308)

  (2) security Update for Microsoft Office InfoPath 2007 (KB979441)

  (3) update for Microsoft Office PowerPoint 2007 (KB982158)

  (4) update for Microsoft Office Word 2007 (KB982135)

  (5) security update for Microsoft Office System 2007 (KB982312)

  (6) security Update for Microsoft Office System 2007 (KB982331)

  Updates download successfully.  It seems that they are installed correctly, 1 first 6, then 2 of 6, etc..   At the end of the process, I get a message that "some updates were not installed."  In fact, none of the 6 were installed.   Then I get an error message:

  Code 646: Windows Update encountered an unknown error.

  9 results for "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  1.	1 Windows Update error 80072efd
  2.	2 problems with installing updates
  3.	3 error code Windows Update 80070422, 80244019, or 8DDD0018
  4.	4 Windows Update, error 8024402C
  5.	5 Windows Update error 80070003
  6.	6 Windows Update error 80070643
  7.	7 Windows Update, error 8024001
  8.	8 Windows Update error 800f020b
  9.	9 Windows Update error 800f0828

  I have gone through each of them and tried to perform the actions suggested without success.

  I also tried downloading/installation these one by one, without success.

  Help, please.

  Hi all

  A new article was created to solve the problem, this KB includes a fix specifically for this issue. Here is a link to the KB:

  http://support.Microsoft.com/kb/2258121

  Thank you

  Bobby